204/2016 Sb.
DECREE
of 15 November 2004. June 2016,
amending Decree No. 528/2005 Coll. on physical security and
certification of technical means, as amended
The National Security Office shall, pursuant to section 33 and section 53 (a). and), c), (d)),
e), (f)), and j) Act No. 412/2005 Coll., on the protection of classified information and on the
security, as amended by Act No. 255/2011 Coll.:
Article. (I)
In annex 1 to the Decree No. 528/2005 Coll. on physical security and
certification of technical means, as amended by Decree No. 454/2011 Coll.
section 4.1. including the title reads as follows:
"4.1. ACCESS CONTROL SYSTEM to a SECURE AREA or OBJECT
Access control system is studied, assuming its implementation on
all entrances to the building or secure areas.
------------------------------------------------------------------
4.1.1. Access control system type 4:
SS6 = 4 points
------------------------------------------------------------------
Access control system type 4 must be certified by the Office, comply with the
at least grade 3 as to ČSN EN 60839-11-1 Alarm and electronic
security systems-part 11-1: electronic access control systems
-System requirements and component, and access is being used:
and PIN identification and control),
(b)), biometrics and PIN, or
(c) identification and biometrics control).
Access control system type 4 must be completed by an access barrier
preventing repeated access and ensuring one transaction mode-
one pass ".
------------------------------------------------------------------
4.1.2. Access control system type 3:
SS6 = 3 points
------------------------------------------------------------------
Access control system type 3 must be certified by the Office, comply with the
at least grade 3 as to ČSN EN 60839-11-1 Alarm and electronic
security systems-part 11-1: electronic access control systems
-System requirements and component, and access is being used:
and PIN identification and control),
(b)), biometrics and PIN, or
(c) identification and biometrics control).
------------------------------------------------------------------
4.1.3. Access control system type 2:
SS6 = 2 points
------------------------------------------------------------------
Type 2 access control system must be certified by the Office, comply with the
at least grade 3 as to ČSN EN 60839-11-1 Alarm and electronic
security systems-part 11-1: electronic access control systems
-System requirements and component, and access is being used:
the identification element)
(b)), or
c) biometrics.
Access control system, you can replace the type 2 control input, you
continuously carries out surveillance of members of the armed forces or
the armed forces, and at all entrances to the building or secure
area.
------------------------------------------------------------------
4.1.4. Access control system type 1:
SS6 = 1 point
------------------------------------------------------------------
Access control system of the type 1 form a mechanical barrier to lock out
the entry.
Note: to section 4.1.
Access control system type 1 can only be used on entry to the secure
the category area confidential or Reserved.
When you check the entry to the building or secure area category
Top secret facilities are used for searching dangerous
substances or articles.
An electronic access control system must report to the permanent post
surveillance or an unauthorized attempt to access or open space
the expiry of the authorized period after lawful access to open space.
For certified electronic access control system can be considered as
certified alarm security system with the access of the tools.
The range of tests that are required for the certification of electronic
access control system, is published in the certification procedure of the Office.
The installation of electronic access control system, its operation and maintenance
must comply with ČSN EN 60839-11-2 Alarm and electronic security
systems-part 11-2: electronic access control systems-guidelines for
the application. ".
Article II
The effectiveness of the
This Decree shall take effect on the 15th day following its publication.
Director:
Ing. He returned in r.