552/1990 Coll.



The DECREE



The Czech Office of work safety and the Czech Mining Authority



of 7 June. December 1990,



amending and supplementing Decree of the Czech Office of work safety and the

The Czech Mining Authority no. 19/1979, which determined the dedicated

lifting equipment and lays down certain conditions to ensure their

safety



The Czech Office of work safety according to § 5 (3). 1 (a). (d)), and (f)) of law No.

174/1968 Coll., on State specialized supervision of work safety, in agreement

with the relevant central authorities and the Czech mining Office under section 6 (1). 6

(a). and the Czech National Council) Act No 61/1988 Coll. on mining activities,

explosives and the State Mining Administration, provides:



Article. (I)



Decree of the Czech Office of work safety and the Czech Mining Authority no.

19/1979, which determined the dedicated lifting equipment and provides for the

some of the conditions to ensure their safety, shall be amended and the following

as follows:



1. section 1 (1). 1:



"(1) the Ordinance is binding on the Organization, covered by the scope of the

public vocational safeguards work, ^ 1) for

the organizations that carry out activities subject to the supervision of the authorities of the Chief

the State Mining Authority ^ 2) and for legal and natural persons, which

carry out business activities in accordance with specific rules (^ 3)

"the Organization"). ".



1) § 3 (3). 1 Act No. 174/1968 Coll., on State specialized supervision of

safety work.



2) section 39 of the Act of the Czech National Council No. 61/1988 Coll. on mining activities,

explosives and the State Mining Administration.



3) Eg. Law No. 105/1990 Coll., on citizens ' private business, law No.

104/1990 Coll., on public limited liability companies Act No. 173/1988 Coll., on

the enterprise with foreign participation, in the wording of Act No. 112/1990

SB.



2. In section 3, paragraph 3. 1, in the first sentence, before the words "revision tests" shall be

the words "revision a".



3. In section 3, paragraph 3. 2, after the word "residence", the words ", where appropriate, Permanent

stay "and deleted the words" supported by the opinion of its parent

the authority ".



4. In section 3, paragraph 3. 3 deletes the letter c).



Subparagraph (d)), and (e)) shall become points (c) and (d)).)



5. The existing text of § 4 shall become paragraph 1 and the following new

paragraphs 2, 3 and 4, which reads as follows:



"(2) the production or Assembly of the organisation is required to notify the authority in writing of the

supervision according to the location of the device, at least 15 days in advance instead of

and the individual time trial



and the first piece of equipment) referred to in section 2 (2). 1, produced in the same

the implementation, which said to working condition in the production

the Organization,



(b) the device referred to in section) 2 (2). 1 (a). (b)), e) and (f)), which stated in the

working condition in the customer organization.



(3) the equipment referred to in paragraph 2 may, production or Assembly organization

deliver to the customer only after the successful individual tryout confirmation

supervisory authority.



(4) in the case of imported equipment ensures compliance with the obligations referred to in paragraphs

2 and 3 user organizations. ".



6. § 5, the following paragraph 6 is added:



"(6) for the device tested in accordance with section 4, paragraph 4. 3 if in the beginning of the

operation after more than 3 months, you just need to verify compliance with the conditions for

to ensure the safe operation of designated provisions to ensure the safety of

work and of technical equipment or device documentation. ".



7. the heading of section 7 including:



"section 7 of the



Review and revision tests



The organization is obliged to continuously verify the revisions and revision tests

other operational competence facilities, the extent and completeness of the documentation. These

the review and revision of the test shall be carried out to the extent and within the time limits prescribed by the

technical standards, where appropriate, the technical conditions of production

Organization. ".



8. In section 8 (2). 1 at the beginning of the sentence following the word "revision".



9. section 8 (2). 2 is added:



"(2) the review techniques must have for the implementation of the activities referred to in paragraph 1

certificate of professional competence issued by the supervisory authority, on the basis of the

tests done. ".



Article II



This Decree shall take effect on the date of publication.



The President of the Czech Office of work safety:



Ing. Gerner in r.



The President of the Czech Mining Authority:



in the z.. Ing. Makarius in r.