75/2017 Sb.



DECREE



of 28 June. February 2017,



amending Decree No. 392/2003 Coll. on road safety

technical installations and about the requirements for dedicated technical equipment

pressure, lifting and gas in mining activities and the activities carried out by

using mining techniques, as amended by Decree No. 282/2007 Coll.



The Czech mining Office lays down pursuant to § 5 para. 3, § 6 (1). 6 (a). and) and §

paragraph 8A. 8 of the law No. 61/1988 Coll. on mining activities, explosives and

the State Mining Administration, as amended by Act No. 542/1991 Coll. and Act No.

124/2000 Coll.:



Article. (I)



Decree 392/2003 Coll., on the safety of technical equipment and

about the requirements for dedicated technical equipment pressure, lifting and

gas in mining activities and activities carried out using mining techniques,

as amended by Decree No. 282/2007 Coll., is amended as follows:



1. In article 3, paragraph 3. 3 at the end of the text of subparagraph (a)), the words ", including

its accessories ".



2. in article 3, the following new paragraph 3a, including footnote # 44

added:



' section 3a



(1) Installation and operation of the machinery referred to in § 3 (1). 1 (b). and)

shall be carried out according to project or drawings of the device.

The device can be put into operation, if the project's documentation

It is in the Czech language, corresponding to the actual condition and contains, in particular,



technical description) and machinery Assembly drawing indicating the



1. specifications of the individual parts-products with parameters that

technology requires, including their connections and interrelations,



2. calculations of load-bearing structures and structures for the proper walking,



3. the specifications and the location of the security guards, trailing stops and

other passive safety devices,



4. specifications, location and setting values of safety sensors

limit switches, meters operating values



5. the technological continuity of individual components with an indication of the mutual

blocking, blacklist and limit values, the location of the filter, use

expansion joints,



6. how to carry out the connections of the individual parts, in particular appropriate

welding technology and control after welding,



7. the tests after installation and any subsequent tests and revisions,



(b) the signature of the Designer) installation of machinery referred to in paragraph 2

confirming his acceptance of the project documentation, registration number

the certificate and the date of signature,



(c) the signature of the Designer) machinery installation in case of

changes in the project documentation corresponding to the actual state of the

confirming the consent with the changes, the registration number of his

the certificate and the date of signature. For changes that do not affect the safety,

It is sufficient to draw the changes into the project documentation of the responsible

and approval of the engineer responsible for the installation, operation, management

and maintenance of the machinery provided for in paragraph 3.



(2) project the installation of machinery can technically competent

a person who meets the requirements for professional qualifications of the designer

machinery installation ^ 44).



(3) to control the Assembly, operation and maintenance of machinery referred to in §

3 (2). 1 the Organization shall determine the technicians responsible for the installation, control

operation and maintenance of the machinery. This technician must have at least

secondary education with GCSE with a technical focus and at least

a two-year practice.



44) § 2 (b). l) Decree No. 298/2005 Coll. on technical requirements

qualifications and competence when mining activity or activities

by using mining techniques and on amendments to certain laws, as

amended by Decree No. 378/2012 Coll. ".



3. In section 6 (1). 3 of the introductory part of the provisions, the words "shall be

technical equipment ", the words" that work with gas, whose

critical temperature is lower than 50 ° c, or with a substance which is

temperature of 50 ° c absolute vapour pressure exceeding 3 bar, and which are

used ".



4. In article 7 (2). 5 at the end of the text of subparagraph (a)), the words "and (f))".



5. In article 7 (2). 5 (b). (b)), the words "to (f))" shall be replaced by "to (e))".



6. § 12 para. 9, after the words "the underground", the words "or traffic

device in vertical underground ^ 17) ".



7. In article 17, paragraph 1 shall be deleted and shall be deleted at the same time, paragraph

2.



8. In paragraph 17, the words "reserved technical equipment gas

class ", the words" and a ".



9. In annex 7, part III, section 2. (d)) shall be deleted.



Article II



This Decree was notified in accordance with the directive of the European Parliament

and Council Regulation (EU) No 2015/1535 of 9 June. September 2015, the procedure for the provision

information in the field of technical regulations and of rules on services,

the information society.



Article. (III)



The effectiveness of the



This Decree shall enter into force on 1 January 2000. June 2017.



President:



Ing. Sternberk in r.