(February 28, 2005, customs, national development and Reform Commission, Ministry of finance, Ministry of Commerce, the 125th reported as of April 1, 2005) Chapter I General provisions article to regulate and strengthen the management on auto parts imports and promote healthy development of the automobile industry, in accordance with the relevant laws and regulations, these measures are formulated.
Article II of this regulation is applicable to the relevant departments of the State approval or registration of a vehicle manufacturer, needed to produce assembled cars constitute a characteristic of vehicle supervision and administration of imported auto parts.
Truck manufacturer imports parts (CKD) or import (SKD), but in the local customs of customs clearance formalities and payment of taxes, these procedures do not apply.
Third cars in these measures refers to the classification of motor vehicles and their trailers (People's Republic of China national standard GB/T15089-2001), the m and n categories of vehicles.
Motor vehicles of category m are at least 4 wheels and used for passenger motor vehicles; motor vehicles of category n refers to at least 4 wheels and is used for cargo vehicles.
The fourth car Assembly in these measures (systems), including body (including cabin) Assembly, Powertrain, transmission Assembly, drive axle, non-driving axle and frame Assembly, steering system, braking system, and so on.
Fifth referred to herein constitute the entire vehicle characteristics and component assemblies (systems) feature refers to car manufacturers using imported auto parts in the loading status constituted at the time the vehicle characteristics, or when the machine is already constituted assemblies (systems) feature.
Sixth General Administration of customs, the State development and Reform Commission (hereinafter referred to as the development and Reform Commission) and the Ministry of Commerce, Ministry of finance in accordance with the characteristics of these measures constitute a vehicle imported car parts management. Customs General Administration and national development and Reform Commission, the Ministry of Commerce, Ministry of Finance set up forms an integral feature of auto parts import management team (hereinafter referred to as leading group). Office of the leading group in the General Administration of customs, responsible for daily affairs leading group.
Vehicles feature state approved professional development centre (hereinafter referred to as the approved Centre) accept Customs Commission, responsible for imported components constitutes the whole vehicle or Assembly (systems) characteristics were approved. Chapter records seventh auto manufacturers in the domestic market sales for the purpose of using imported auto parts in the production car, should be based on this approach of using imported components constitutes production models by vehicle features a self-test. Self-test to determine composition characteristics of vehicles, manufacturers shall, before imports of auto parts, will be filed about cars to the General Administration of customs.
Different models of the same car manufacturer, and should be filed separately. Producers found not to constitute a vehicle after the self test feature, shall apply to the customs review. Center for easy review or approved by the Customs General Administration shall entrust the site review.
Review of constitutes characteristics of vehicle, supplemented by a manufacturer for the record do not constitute a characteristic of vehicle do not need to record.
Car manufacturers on application to the national development and Reform Commission of the road motor vehicles manufacturers and product announcements, and to the Ministry of Commerce when they apply for automatic import licenses, should provide models of the self test results if imported components do not constitute the entire vehicle features, you should also provide a review of the General Administration of customs.
Development and Reform Commission in the road vehicle manufacturers and product announcement for use in car import part of the characteristics of production vehicles marked "vehicle features the words", the Ministry of Commerce in the composition characteristics of vehicle imports marked on parts of the automatic import license "vehicle characteristics".
Eighth record models should be already included in the national development and Reform Commission of the road motor vehicles manufacturers and product bulletin product.
Nineth article production enterprise in application record Shi should provides following material: (a) Enterprise basic profile; (ii) record models annual production plans; (three) record models of parts classification and price proportion listing; record models of price and domestic pieces, and imports pieces of points items price (are to not containing tax price calculation); (four) record models all procurement pieces of domestic and abroad suppliers and the supply varieties listing; (five) included road motor vehicle car production enterprise and the products announcement of proved. After tenth customs filing application materials to the national development and Reform Commission, the Ministry of Commerce and the distribution of related archival materials is located directly under the customs.
Development and Reform Commission, Ministry of Commerce and the local customs receipt after filing separately according to their respective functions to implement records management.
11th local customs upon receipt of the enterprise archival materials from customs, should be reviewed for eligible auto manufacturers and vehicle registration, and notify the manufacturer of the vehicle. 12th auto maker, after registration, based on auto parts imports should be planned, in front of the car parts imported from the local customs taxes total guarantee.
Total guarantee amount of security shall not be less than the tax business monthly import parts and components required to pay the total amount of tax.
Car manufacturers should be adjusted according to the record number of models and import, total guarantees apply for tax change to the local customs in a timely manner the amount of security that, after it has been verified, customs formalities related to the amount of security changes.
Chapter III customs management 13th car manufacturer auto parts imports constitute the vehicle features, should local customs clearance formalities and paying the tax.
Car manufacturer from its ports constitute the vehicle outside the location characteristics of automobile parts, after the completion of registration and taxes total security procedures, and transit applications made to the local customs, in accordance with the relevant provisions of the transit deal with the transfer of the customs clearance procedures.
Other does not constitute a complete vehicle characteristics of auto parts imports, prescribed in the preceding paragraph shall not apply.
14th enterprise at the time of customs clearance procedures should be submitted to the customs import declaration form marked "vehicle features" auto parts automatic import licenses and other relevant licenses and accompanying documents such as customs requirements. 15th constitute the vehicle characteristics of auto parts imports, involving permits, during the clearance process audit documents.
Import customs levy or exemption shall be made out "vehicle characteristics"; receiving unit bar should fill out the car manufacturers name.
Auto parts in different models, each Party shall fill in the Declaration form.
16th constitute the vehicle characteristics of auto parts imports, customs bonded goods regulations related to the management of import procedures, and follow the import status in the customs statistics. The fourth chapter approved vehicle features standard and approved the 17th vehicle features approved by the car manufacturers to apply to the General Administration of customs, the General Administration of customs approved by the delegate Centre approved. Issued by the Customs according to the approved centre of the approved report determining the applicable tax rate and customs value, for the tax procedures.
Imports of auto parts and vehicle characteristics measures shall be formulated separately by the General Administration of Customs released approved.
Approved centres according to the General Administration of customs of the 18th directive related to automobile manufacturers in vehicle type approval, issued by the approved report. 19th record car assembled in the 10th after the first vehicle car production enterprise shall apply to the General Administration of customs approved vehicle characteristics.
Approved centres shall be accepted within 1 month after the customs service directive, to complete the report approved for the vehicle type approved and issued. Before the implementation of these measures has been put into production models, auto production enterprises shall, within 1 month after the implementation of these measures complete the self test, and test results reported to the General Administration of customs. Self test results constitute a characteristic of vehicle car production enterprise shall, upon completion of the self-test to customs service records in the 10th, and vehicle characteristics apply to the General Administration of customs approved do not constitute a characteristic of vehicle, shall apply to the customs review. Review results for composition characteristics of vehicles, car makers should be reviewed after the results were announced in the 10th to the Customs General Administration supplementary record, and vehicle characteristics apply to the General Administration of customs approved.
Approved centres according to the directives of the General Administration of customs, shall, within 3 months of completion has been put into production for the record car approved, issued and approved the report. 20th approved centre approved models for the base model. After approval of the base type car basis with imported components, car manufacturers should be made available to local customs and the approved Centre optional types, and truthfully, if practical options.
Authorized centers after review and reporting, the Department approved the dutiable value tax adjustments. Car manufacturers in the production process, form the condition changes of vehicle characteristics, may apply to the General Administration of customs on the base again. Approved for the new report issued by the Customs according to the approved Centre to determine dutiable value of tax.
Approved, no longer a vehicle characteristics, customs is no longer in accordance with the implementation of this approach to the model management. 21st article has following case one of of, imports car parts constitute whole car features: (a) imports full parts (CKD) or half parts (SKD) assembled car of; (ii) in this approach fourth article provides of finds range within: 1. imports body (containing cab), and engine two big Assembly loading of; 2. imports body (containing cab) and engine two big Assembly one of and the other 3 a Assembly (System) (containing) above loading of; 3.
Import car body (CAB) and 5 other than the two assemblies assemblies (systems) (or more) of loading. (C) the sum of the prices of imported components to achieve the model vehicle a total price of 60% and above.
Approved standards for the vehicle characteristics came into operation on July 1, 2006.
22nd article has following case one of of, imports car parts constitute car Assembly (System) features: (a) imports package parts assembled Assembly (System) of; (ii) imports key parts or points Assembly assembled Assembly (System), its imports key parts or points Assembly reached and the over provides number standard of (see annex 1, and 2); (three) imports parts of price sum reached the Assembly (System) total price of 60% and the above of.
23rd domestic auto assemblies (systems) production of assemblies (systems) used imported components do not constitute Assembly (System) feature of the assemblies (systems) deemed domestic assemblies (systems).
24th domestic auto and auto parts manufacturers, on imported parts and components (without Assembly, sub assembly) and the substantive processing of parts for production of parts, production parts as a domestic.
, The term "substantial transformation" refers to products processed to meet the People's Republic of China import and export goods rules of origin criteria for establishing substantive changes.
25th approved Centre to record when the vehicle type approved vehicle features, auto makers should actively cooperate with and submit the following documents: (a) the approved application; (ii) enterprise test report and (iii) of the record models spare parts list (see Appendix 3), and (d) authorized centers that need any other information.
26th car production enterprise shall, upon application filed or approved without applying for the vehicle features, Customs may direct the approved centres for approval. Fifth chapter tax principles and taxes levied 27th constitute the vehicle characteristics of imported car parts from customs clearance to the before taxes, bonded goods by local customs regulations.
In order to improve the efficiency of management, conditions of car manufacturers, should be with your local customs electronic network.
28th article Import Auto Parts assembled the entire car, automobile manufacturers declared to the customs tax, customs, in accordance with the People's Republic of China Customs law (hereinafter referred to as the Customs Act), the People's Republic of China regulations on import and export duties and the People's Republic of China import and export tariffs of the relevant provisions, classified and taxed.
Approved by the authorized centers constitutes the vehicle characteristics of imported components, and customs in accordance with vehicle classified, and in accordance with the vehicle tax rate levied customs duty and import value-added tax; its approved does not constitute a characteristic of vehicle, customs in accordance with parts and components classified, and in accordance with the applicable tax rate levied customs duty and import value-added tax.
29th article customs constitute a vehicle when taxed imported parts in accordance with the characteristics of vehicle classification, if the parts provided by the manufacturer at the time of importation has made the import duty and import value-added tax, and automobile manufacturers to be able to provide proof of import taxes, has tax payable shall be deducted.
Enterprise in accordance with the regulation of imported auto parts, 1 year is not used in the production of vehicles, shall, within the expiration of 1 year from the date of 30th as tax to the Customs and tax formalities in accordance with the relevant provisions of the customs.
30th under processing trade cars sale, these measures shall apply. Car manufacturers in applying for its use of processing trade constitutes a vehicle features before domestic sales of imported auto parts production and Assembly of auto products, shall, in accordance with the regulations to the General Administration of Customs has gone through formalities and accept approved approved for the Centre.
Approved by the Customs according to the results, which constitute the vehicle characteristics, by companies of the bonded imported materials domestic approval for processing trade and the corresponding import licence, in accordance with the applicable tax rate levied taxes as provided herein, and makeup of all the imported components of postponed tax interest. Free trade zone, export processing zones and other special customs supervision automobile manufacturers in applying for its use constitutes a characteristic of vehicle entry into the district before domestic sales of auto parts production and Assembly of automotive products, shall, in accordance with the regulations to the General Administration of Customs has gone through formalities and accept approved approved for the Centre.
Approved by the Customs according to the results, which constitute the vehicle characteristics, import license registration procedures, in accordance with the domestic real state taxes. 31st car production enterprise shall authorized centers constitutes a vehicle approved for the feature report issued after the month, before the 10th working day of each month, to the local customs and tax returns.
Car manufacturers made last month by the Customs to imported parts used by the car with the vehicle tax rates focused on levying tariffs and import value-added tax.
When auto manufacturers in first tax return, should be approved before the report was issued by the imports that have been used in the production of vehicle parts in a joint declaration to the customs tax. Article 32nd car manufacturers should be issued by approved centres should not constitute a characteristic of vehicle within the approved report 30th, to pay tax where the customs declaration has been imported but not auto parts.
Customs in accordance with car parts and components tax levied customs duty and import value-added tax, and the models are no longer guided by management as provided herein.
The 33rd car manufacturers all models approved by the authorized Centre does not constitute the vehicle features, and pay the relevant taxes, the Customs shall inform the enterprise tax total dissolved security procedures.
34th article car production enterprise to location customs declared tax Shi should submitted following single card and information: (a) approved Center of approved report; (ii) Enterprise last month about models of whole car production number (approved results for not constitute whole car features of except); (three) Enterprise last month imports of has for production assembled whole car of about models car parts listing (approved results for not constitute whole car features of except); (four) Customs think need provides of other single card.
35th enterprises declared to constitute the vehicle characteristics of automobile parts, exempting the property bar, choosing "vehicle tax", sold bar, choosing "CIF"; enterprise to the customs declaration does not constitute a characteristic of vehicle at the auto parts, exempting the property bar, choosing "taxing parts" sold way bar, choosing "CIF". 36th sixth chapter legal liability for violations of these rules, constitute an act of smuggling or violation of customs regulations, customs in accordance with the Customs Act and the People's Republic of China regulations for the implementation of customs administrative punishment shall be punished.
Constitute a crime, criminal responsibility shall be investigated according to law.
37th article car production enterprise declared road motor vehicle car production enterprise and the products announcement and record Shi, violation this approach of about provides, not truthfully declared imports parts constitute whole car features of, or used dispersed imports way imports of parts constitute whole car features, imports Qian not to customs application record of, by development reform Board suspended about models of road motor vehicle car production enterprise and the products announcement, stay car production enterprise corrected Hou, again be recovery.
38th article of the rules of the seventh schedule as of April 1, 2005. Annex: 1. Assembly (System) defined table 2. car Assembly (System) belongs parts defined range 3. record models parts procurement listing annex 1: = Assembly (System) defined table ┌-the-the-the-the-the-the-the-the-the-the-the-the ┬-the-the-the-the-the-the-the-the-the-the-the-the-the-the-the-the-the-the-the-the-the-the-the-the-the-the-the ┬-the-the-the-the-the-the-the-the-the-the-the ┬-the-the-the-the ─────────┐
│ │ │ 进口件界定数量 │ │
│ 总成名称 │ 关键件或分总成名称 │ （单位：件） │ 备注 │
│ │ ├────┬──────┤ │
│ │ │ A类件 │总界定数量 │ │
├────┬───┬───┼───────────────────────────┼────┼──────┼─────────────┤
│ │ M 类 │A类件 │侧围、车门、发动机罩盖 │ 2 │ │ │
│ │ 1 ├───┼───────────────────────────┼────┤ 5 │ │
│ │ │B类件 │顶盖、前围、座舱地板、行李箱盖（或背门）、后围、翼子板│ - │ │ │
│ ├───┼───┼───────────────────────────┼────┼──────┤ │
│ │ M 类 │A类件 │顶盖、侧围 │ 2 │ │ │
│ │ 2 ├───┼───────────────────────────┼────┤ 4 │M 类分总成中，如有进口的外│
│车身（驾│ │B类件 │发动机罩盖、前围、车门、后围、地板 │ - │ │ 1 │ │ Drove room) ├-the-the-the ┼-the-the-the ┼-the-the-the-the-the-the-the-the-the-the-the-the-the-the-the-the-the-the-the-the-the-the-the-the-the-the-the ┼-the-the-the-the ┼-the-the-the-the-the-the ┤ cover pieces stamping pieces, is the points Assembly depending on │││ m class │ a, class pieces │ top cover, and side surrounding, and body skeleton │ 2 │ │ for imports points Assembly. │
│ │ 3 ├───┼───────────────────────────┼────┤ 4 │ │
│ │ │B类件 │前围、车门、后围、地板 │ - │ │
│
│ ├───┼───┼───────────────────────────┼────┼──────┤ │
│ │ │A类件 │顶盖、车门、侧围 │ 2 │ │ │ │ │ N类 ├───┼───────────────────────────┼────┤ 5 │ │
│ │ │B类件 │发动机罩盖、前围、后围、翼子板、地板 │ - │ │ │
├────┼ ───┼───┼───────────────────────────┼────┼──────┼─────────────┤
│ │ │A类件 │缸体、缸盖、高压油泵 │ 2 │ │ │
│ │柴油机├───┼─────────── ────────────────┼────┤ 6 │ │
│ │ │B类件 │曲轴、增压器、凸轮轴、连杆、起动机、发电机、柴油喷射器│ - │ │ │
│ 发动机 ├───┼───┼───────────────────────────┼─── -┼------┤ Without radiators, fans, air filters, │ │ │ │ a │ Assembly class cylinder block and cylinder head, EFI device (including the ECU, throttle body, injectors, sensors │ │ │ 2 muffler, fuel tank, clutch │ │ │││ gasoline engine) │ │ 6 │ │
│ │ ├───┼───────────────────────────┼────┤ │ │
│ │ │B类件 │曲轴、凸轮轴、燃油泵、连杆、起动机、发电机、增压器 │ - │ │ │
├────┼───┼───┼───────────────────────────┼────┼──────┼─────────────┤
│ │手动变│A类件 │壳体、齿轮、离合器 │ 2 │ │ │
│ │ 速器 ├───┼───────────────────────────┼────┤ 4 │ │
│ │ │B类件 │轴类、换档机构组件、同步器、分动器 │ - │ │1.不含远程变速操纵系统 │
│ 变速器 ├───┼───┼──────── -The-the-the-the-the-the-the-the-the-the-the-the-the-the-the-the-the-the-the ┼-the-the-the-the ┼-the-the-the-the-the-the ┤ 2. full round drive vehicles of points moving device single │ │ Assembly │ │ a, class pieces │ shell body, and clutch device (automatically transmission with liquid coupled device), and automatically transmission control │ 2 │ │ for Assembly assessment Shi, transmission Assembly total │││ automatically variable │ │ module (ECU) │ ¦ 4 ¦ define a corresponding number of 3. │
│ │ 速器 ├───┼───────────────────────────┼────┤ │ │
│ │ │B类件 │分动器、齿轮（或摩擦轮与钢带）、轴类、换档机构组件 │ - │ │ │
├────┼───┴── -The ┼-the-the-the-the-the-the-the-the-the-the-the-the-the-the-the-the-the-the-the-the-the-the-the-the-the-the-the ┼-the-the-the-the ┼-the-the-the-the-the-the ┼-the-the-the-the-the-the-the-the-the-the-the-the-the ┤││ drive bridge │ shell body, and around half axis (containing, speed million to section), and steering section, and differential, and pendulum arm, and │-│ 6 │││ m class car bridge │ │ wheel, and bearing, and main reducer, and hanging frame spring, and shock absorber │ │ │ │
│ 1 ├───────┼───────────────────────────┼────┼──────┼─────────────┤
│ │ 非驱动桥 │车轴（含拖臂总成）、轮毂、轴承、悬架弹簧、减振器 │ - │ 4 │ │
├────┼───────┼───────────────────────────┼────┼──────┼─────────────┤
│M 、M 、│ 驱动桥 │桥壳、差速器、半轴、传动轴、主减速 Manager, hub, bearings, vibration reduction │-│ 5 increase in │ front axle with independent swing arm, go │ │ │ │ 2 3 │││ joint, suspension spring, total number of definition 6. │
│N类车桥 ├───────┼───────────────────────────┼────┼──────┼─────────────┤
│ │ 非驱动桥 │转向节、减振器、前轴、悬架弹簧、轮毂、轴承 │ - │ 4 │ │
├────┴───────┼──────────────────
─────────┼────┼──────┼─────────────┤
│ 车架 │纵梁（或前副车架及发动机托架）、横梁（或后副车架） │ - │ 2 │ │
├────────────┼───────────────────────────┼────┼──────┼─────────────┤ │ │ Brake system brake master cylinder (brake or gas valve), the booster Assembly, front brake Assembly, making │-│ 4 ││││ actuator Assembly, anti-lock braking system (ABS) of ECU and valve body Assembly │││ │
├──────┬─────┼───────────────────────────┼────┼──────┼─────────────┤
│ │ 动力转向 │转向器总成、转向控制阀总成、转向助力油泵、转向盘、转向│ - │ 3 │ │
│ 转向器系统 │ │轴及万向节 │ │ │转向盘中包括气囊 │
│ ├─────┼───────────────────────────┼────┼──────┤ │
│ │非动力转向│转向器总成、转向轴及万向节、转向盘 │-│ 2 ││└-the-the-the-the-the-the ┴-the-the-the-the-the ┴-the-the-the-the-the-the-the-the-the-the-the-the-the-the-the-the-the-the-the-the-the-the-the-the-the-the-the ┴-the-the-the-the ┴-the-the-the-the-the-the ┴-the-the-the-the-the-the-the-the-the-the-the-the-the ┘ =tbl/> Note: 1. imports a, class pieces, and b class pieces of and reached or over imports pieces total defined number that considered constitute Assembly (System) features; but, if imports a, class pieces of number reached or over
A class defining quantity is considered to constitute an Assembly (System) feature. 2. when the key components or assemblies, the import prices of more than 60%, then the key parts or assemblies are calculated according to the imported parts.
The key part or sub-assembly only tier II supplier to OEMs, in principle.
3. all-wheel drive vehicle's move is a separate Assembly, instead of non-driving axles, starter parts for shell, gears (or chain), adaptors, a 2;B class defining quantity for shaft, bearings, Synchronizer, electronic control devices; always defines a quantity of 4.
4. two driving axle and multi-axle vehicles according to the actual number of bridges were determined by Assembly features, and a corresponding increase in vehicle Assembly and composition characteristics defined quantity. 5. from April 1, 2005 to June 30, 2006, the a and b merge a class key defined in accordance with the total number for evaluation.
Effective July 1, 2006, all models are in accordance with the distinction between the a and b class assessment of key components of the standards.
6. If a vehicle does not in the present assemblies (systems) the definition stated in the table matches the functionality of the key part or sub-Assembly, and accordingly reduce the defined amount or assemblies (systems). Annex 2: cars (System) owned parts defined assemblies (systems) respective parts range are mainly used for automobile features found assemblies and systems, assemblies (systems) respective parts define the scope of the principle: first, the functional integrity; b and Assembly stages clearly. Also reference QC/T265-2004 automotive parts numbering rules, QC/T514-1999 the glossary of terms for car body ', GB/T5727-1985 ', GB/T4780-2000 ' auto body terminology the terminology and definitions for automotive hydraulic transmission, and GB/T5333-1985 of the terminology and definitions for automotive drive axle, GB5620.2-1985 the car and trailer brake of terms and their definitions, GB/
T5179-1985 the steering system of terms and definitions. Body (CAB): lacquered bodywork in front of body (body in white), not including the body accessories and decorative items.
Main body structure and cover (non-unitized body construction) of welded components.
M-class include front, side and rear wall, top cover, body, flooring, fenders, doors, engine hood, trunk lid (or back-door Assembly).
1 m class including Wai, other than the side wall, Back wall, top cover, car floor, cover the floor plate (metal parts), roof ventilation Windows, fenders, doors, engine hood, body frame (non-unitized body construction).
1 engine Assembly: including cylinder body, and gas cylinder head, and are Shi gear room, and valve cover, and crankshaft, and flywheel, and Rod, and piston, and bearing, and camshaft, and are Shi institutions, and into exhaust door, and drive institutions, and into exhaust disambiguation tube, and ignition system, and pump, and lubricants pump, and oil filter device, and crankshaft box ventilation device, and fuel pump, and EFI device (containing ECU, and throttle valve body, and injector, and sensor), and booster device, and Starter, and generator, and fuel pipeline, and fuel filter device, and sensor and the alarm device,;
Diesel engines such as the high pressure oil pump and intercooler.
Without heat sinks, fans, air filter, muffler, clutch, emission control devices (such as particulate traps and catalytic converters).
Transmission Assembly: automatic transmission include shell, gears (or friction wheel and steel), shafts, bearings, shift mechanism components, hydraulic torque converters, automatic transmission control module (ECU), oil pump, hydraulic control box, sensors, actuators, and so on.
Manual transmissions including housings, pinion, Synchronizer, shafts, bearings, gear body, clutch components, sensors, actuators, etc.
Without the remote control.
Drive axle Assembly: includes the main reducer, differential, axle, axle (with constant velocity universal joint), steering knuckle, swing arms, wheels, bearings, suspension springs, shock absorbers, etc.
Non-driving axle Assembly: includes axle (trailing arm Assembly), hub, bearings, suspension springs, shock absorbers, etc.
Frame Assembly: includes longitudinal beam (or unibody front subframe and the engine Bay), beam (or unibody subframe).
Brake system: includes the brake pedal, return spring, brake master cylinder, wheel cylinder, brake booster, and ABS systems (ECU, valve, sensors), brake lines, liquid storage tanks, retarder, braking force regulator, brake pedal device, parking braking control devices, three-channel control valves, sensors, alarms, and so on.
Air braking system also includes brake, brake actuators, air compressor, air reservoir, filters, air brake valves, double check valves, relay valves, quick release valve.
Steering system: includes steering wheel (with airbag), steering column, steering column supports, steering shafts, universal joints, steering, steering gear bracket, Pitman arm, steering tie rod, steering arm, trapeziums, etc.
Power steering include the steering control valve, power cylinder, steering pumps, power steering tank, steering motor and control module.
Transfer case Assembly: includes shell, shafts, bearings, gears (or chain), adaptors, gear components, electronic devices etc.
Note: 1. due to the diversity of the Assembly structure, the above definition is not the only, different structure will be determined in terms of its parts function primarily.
2. for a function of more than one part, with its most important functions are divided into the Assembly.
3. the constituting Assembly (apart from the body Assembly, frame assemblies), the integrity of the Assembly joints (such as pipes, bolts, nuts, screws, clamps, adhesive, etc), seals and fixed parts contained within the Assembly.
4. each assembly does not include unrelated to its processing and Assembly processes of fuel, lubricating oil, grease, oil, coolant, brake fluid, power, and so on. 附件3：
=
备案车型零部件采购清单
┌──┬───┬───┬───┬───┬───┬───┬───┬───┬───┬───┬───┐
│ │ │ │ │ │ │ │ │每车零│ │ │国内外│
│ │商品HS│总成编│所属总│ 零部 │ │ │ 每车 │ │占整车│零部件│ │
│序号│ │ │ │ │ 品名 │ 单价 │ │部件价│ │ │生产厂│
│ │ 税号 │ 码 │成名称│ 件号 │ │ │ 用量 │ │ 比例 │ 来源 │ │
│ │ │ │ │ │ │ │ │ 格 │ │ │家名称│
├──┼───┼───┼───┼───┼───┼───┼───┼───┼───┼───┼───┤
│ │ │ │ │ │ │ │ │ │ │ │ │
├──┼───┼───┼───┼───┼── ─┼───┼───┼───┼───┼───┼───┤
│ │ │ │ │ │ │ │ │ │ │ │ │
├──┼───┼───┼───┼───┼───┼───┼───┼───┼───┼───┼───┤
│ │ │ │ │ │ │ │ │ │ │ │ │
├──┼───┼───┼───┼───┼───┼───┼───┼───┼───┼───┼───┤
│ │ │ │ │ │ │ │ │ │ │ │ │
├──┼───┼───┼───┼───┼───┼───┼───┼───┼───┼─ ──┼───┤
│ │ │ │ │ │ │ │ │ │ │ │ │
├──┼───┼───┼───┼───┼───┼───┼───┼───┼───┼───┼───┤
│ │ │ │ │ │ │ │ │ │ │ │ │
├──┼───┼───┼───┼───┼───┼───┼───┼───┼───┼───┼───┤
│ │ │ │ │ │ │ │ │ │ │ │ │
└──┴───┴───┴───┴───┴───┴───┴───┴───┴───┴───┴───┘
=tbl/>
注：零部
Sources import or domestic parts.
