Advanced Search

Metallurgical Enterprise Safety Production Supervision And Management Regulations

Original Language Title: 冶金企业安全生产监督管理规定

Subscribe to a Global-Regulation Premium Membership Today!

Key Benefits:

Subscribe Now for only USD$40 per month.
Metallurgical enterprise safety production supervision and management regulations

    (Released on September 8, 2009, the State administration of work safety, the 26th since as of November 1, 2009) Chapter I General provisions

    First metallurgical enterprises in order to strengthen the supervision and administration of production safety, prevent and reduce the production safety accidents and occupational hazards, protection of the safety and health of employees, according to the work safety law and other laws and administrative regulations, this provision is enacted.

    Article iron, steel, rolled steel, iron alloy production job activity and iron and steel enterprises and main processes supporting the auxiliary process, supervision and management of production safety, these provisions shall apply.

    Third State administration of production safety supervision and management of the national metallurgical work safety supervision and management.

    Local people's Governments at or above the county level work safety supervision and management departments in accordance with the jurisdictional supervision, grading the principle of responsibility, for metallurgical work safety supervision and management within their respective administrative areas. Fourth is the responsibility of safety production in metallurgical enterprises, whose main charge is the responsibility for safety of persons, and officials within the respective responsibilities of the units responsible for work safety.

    Group on its branch, subsidiary, holding company's management responsibility for work safety.

    Chapter II security

    Fifth metallurgical enterprises should comply with the relevant safety laws, rules and regulations and the provisions of the State standards or industrial standards.

    Coke preparation, oxygen and relative gases, gas production (excluding recycling) and other dangerous chemicals production unit shall, in accordance with the relevant provisions of the State, obtained the dangerous chemical production enterprise safety production license.

    Sixth metallurgical enterprises should establish and improve the responsibility system for production safety and safety management system, improve safety operation regulation of each work, the post.

    Article seventh metallurgical enterprises employing more than 300 people, you should set up production management, equipped with no less than 3 employees per thousand full-time safety Manager; employees of less than 300 people should be staffed with full-time or part-time production safety management staff.

    Eighth metallurgical enterprises should be required to ensure the safety of production funds, and for the following scope:

    (A) the improvement, reconstruction, and maintenance of security equipment and facilities;

    (B) safety education training and equipped with PPE;

    (C) the safety assessment, monitoring of major hazards, major accident hazards assessment and corrective action;

    (D) the prevention of occupational hazards, occupational hazard monitoring, monitoring and occupational health examination;

    (E) the safety testing of equipment and facilities;

    (Vi) emergency rescue equipment, is equipped with equipment and emergency rescue drills;

    (VII) other items or activities directly related to safety. Nineth metallurgical enterprises the main directors, safety management personnel should receive education and training in production safety, adapt with this unit is engaged in production and business activities of the knowledge and management skills.

    Special operations personnel must be in accordance with the relevant provisions of the State specialized security training examinations, after obtaining a special operations qualifications before they can post. Metallurgical enterprises safety education and training to employees on a regular basis to ensure employees have the necessary knowledge, learn more about work safety laws and regulations, be familiar with the rules and safety regulations, master the job skills for safe operation.

    Without a safety education and training qualified practitioners, not posts.

    Metallurgical enterprises shall, in accordance with the relevant regulations for gas production, storage, transportation, use, maintenance and service personnel for specialized knowledge, gas safety gas safety technology, gas monitors, gas poisoning emergency first aid training, and after passing the examination, before they can arrange for their posts. Article tenth of new construction, renovation or expansion projects in metallurgical enterprises (hereinafter referred to as project) the safety facilities, occupational hazards prevention facilities must comply with the relevant safety laws, rules, regulations and provisions of the national standard or industry standard, and the principal part of the project designed, built and put into production and use (collectively the "three simultaneous").

    Investment in safety facilities and protection against occupational hazards should be incorporated into the construction project budget estimates.

    Units ' safety facilities of construction project "three simultaneous".

    Units shall in accordance with the relevant regulations of safety facilities of construction project design review and acceptance.

    11th construction projects in feasibility study stage shall entrust a qualified intermediary for the safety assessment. Preliminary design of construction projects, you should select a qualified special design unit in accordance with the provisions of security.

    Safety review shall include the relevant safety assessment of the content of the report, comply with the relevant safety laws, rules and regulations and the provisions of the State standards or industrial standards. 12th security facilities of construction projects should be made by a qualified construction units of construction.

    Construction units should be carried out in accordance with the design and construction, and responsible for the safety facilities of quality.

    Designs of safety facilities of construction projects for major changes shall be subject to agreed with the original design, and production safety supervision and Administration Department. 13th security facilities of construction projects are completed, they shall entrust a qualified intermediary for the safety assessment.

    After acceptance, the safety facilities of construction projects, may be put into production and use.

    Safety assessment reports, security review, the safety assessment report shall be submitted to the safety supervision and management departments. 14th metallurgical enterprises should be carried out for the presence of various types of hazard identification, implementation at different levels.

    Constitute a major hazard, should register file, carry out regular testing, assessment and monitoring, and production safety supervision and Administration Department.

    15th metallurgical enterprises should be in accordance with relevant regulations of the State, strengthening the prevention and control of occupational hazards and occupational health surveillance working and take effective measures to control occupational hazards, ensure workplace occupational health conditions in line with laws, administrative regulations and the provisions of the State standards or industrial standards.

    Measurement of radioactive source should be obtained in accordance with the relevant provisions of articles use license. 16th metallurgical enterprises should establish troubleshooting systems of governance, carry out security checks; check found in the accident shall be timely rectification; time rectification is completed, should develop a specific action plan and adopt reliable security measures.

    Inspection and rectification should be recorded. 17th metallurgical enterprises should strengthen the construction, maintenance and other projects and production projects, facilities (hereinafter referred to as project) contractor safety management, project subcontractors do not have the appropriate qualifications may not be unit. Project contract agreement should clearly establish safety responsibilities and obligations of both parties.

    Contracted security costs should be included in the project costs.

    Metallurgical enterprises should be fully responsible for production safety work, contracting units should be subject to unified management, and safety management is in charge of the project.

    No illegal subcontracting, subcontracting of engineering project.

    18th metallurgical enterprises should be from a legal services company hired workers and contracted labor service company, unified safety education and training of workers.

    19th metallurgy enterprises shall establish and improve emergency rescue system, develop appropriate emergency plan, emergency rescue equipment and equipped with necessary equipment, emergency information, education, training, exercises on a regular basis, and in accordance with the provisions of the emergency plan are reviewed and the record.

    20th article metallurgical enterprise should established security checks and hidden rectification records, and security training records, and accident records, and practitioners health guardianship records, and dangerous source management records, and security funds input and using records, and security management Taiwan account, and labor protection supplies issued Taiwan account, and "three while" review and acceptance information, and about design information and the drawings, and security pre evaluation report, and security designed article, and security acceptance evaluation report, archives management system, on about safety of file, and report, and records, timely archive.

    21st metallurgical enterprises of conference rooms, activity rooms, lounges, locker rooms and other crowded places should be set in a place of safety, should not be set in the context of the lifting effect of the high temperature liquid metal.

    22nd metallurgical enterprises bear heavy loads and high temperature radiant, splash, acid and alkali corrosion of hot slag hazard buildings (structures), and shall provide regular safety appraisal in accordance with the relevant provisions.

    23rd metallurgical enterprises should be in the gas tank area to possible gas leaks, gathering places, set fixed gas detection alarm, early warning systems, flying the eye-catching security warning signs and enhance ventilation.

    Enter the gas area operations officer, shall carry the gas detection instruments in front of the job, you should check the gas content in the work environment, and adopt reliable security measures after confirming the gas content meet the requirements upon examination, before entering work.

    24th oxygen system shall adopt reliable security measures to prevent burning explosion accident of oxygen and nitrogen, argon, Pearlescent sand suffocation accidents.

    25th metallurgical enterprises in China should be equipped with commensurate with the job of meeting the national standard or industry standard labor protection and supervision, education practitioners according to the rules used to wear, use.

    Employees during the work, shall strictly comply with the safety rules and regulations, subject to management, wear and use PPE properly.

    Article 26th metallurgical enterprises involving gas and hazardous chemicals such as oxygen, hydrogen production, transport, use, storage facilities and oil tanks, cable tunnels (Gou) and other key fire site shall be taken in accordance with the relevant provisions of effective and reliable fire protection measures.

    27th metallurgical enterprises should be based on the actual situation of production safety, science, rationally determine the volume of the gas tank, in accordance with the safety regulations for gas of industrial enterprises (GB6222), and choosing cabinet location, set safety protection devices, develop gas tank emergency plan. 28th metallurgical enterprises should regularly on safety equipment and facilities check, check and safety devices. More than age and device that is not in line with State industrial policies, to be scrapped.

    To update your existing facility, or modification of, and shall not reduce its safety performance. 29th metallurgical enterprises engaging in maintenance operations, appropriate security measures and contingency plans should be developed, and implementation. The dangerous repair job, safety measures and contingency plans should be reviewed by the bodies responsible for safety management of the entity agrees.

    May occur in the area of the fire and explosion for hot work shall, in accordance with the relevant provisions of fire approval system.

    30th metallurgical enterprises should actively carry out safety production standardization work, and gradually increase the level of safety.

    Metallurgical enterprise after a production safety accident occurs, timely reporting of production safety supervision and management departments should be in accordance with the relevant provisions and the relevant departments, and emergency rescue.

    Chapter III supervision and management

    31st production safety supervision and management departments and their supervisors and inspectors shall strengthen the supervision and inspection of safety production in metallurgical enterprises, for violations of work safety laws, rules and regulations, national standards or trade standards and the provision of safety violations, impose administrative penalties according to law.

    32nd of production safety supervision and management departments should establish and improve construction safety assessment, safety unit, the safety assessment for the record management system, strengthening safety facilities of construction project "three simultaneous" supervision and inspection.

    33rd production safety supervision and management departments should strengthen supervision and inspection of metallurgical expertise of personnel training, improve the ability of law enforcement.

    Safety supervision and management departments should enter the metallurgical enterprise-specific job site supervision and inspection personnel, equipped with the necessary personal protective equipment and monitor screening equipment. Article 34th when inspectors carry out supervision and inspection tasks must present valid law enforcement documents, and carried out by 2 or more persons jointly; checking and handling conditions should be recorded according to law.

    Relating to the technological know-how and business secrets of the units inspected, for which should be kept confidential.

    35th of production safety supervision and management departments should strengthen emergency management in metallurgical enterprises within their respective administrative areas, local people's Governments and the inclusion of major metallurgical emergency rescue emergency response system as a whole.

    Chapter fourth penalty

    Article 36th supervisors and inspectors in the supervision and inspection of metallurgical enterprises, abuse of power, negligence, malpractice, given administrative sanctions in accordance with the Regulations constitutes a crime, criminal responsibility shall be investigated according to law.

    37th metallurgical enterprises in violation of the provisions of the 21st, 23rd, 24th, 27th article, given a warning and a fine of less than 10,000 yuan and 30,000 yuan.

    Article 38th of metallurgical enterprises, one of the following acts, a rectification; fails to mend, fines of less than 20,000 Yuan:

    (A) the safety assessment report, safety articles, in accordance with the provisions of the safety assessment report for the record;

    (B) gas production, transport, use, maintenance and service personnel without training posts;

    (C) from the legal services company hired laborers, or not signed with labor contracts, or not the harmonization of safety education and training of workers.

    The fifth chapter supplementary articles The 39th article of the regulations come into force on November 1, 2009.