Key Benefits:
(Act No. 60 of 21 December 1994 of the People's Government Order No. 60 of 21 December 1994, in accordance with the Decision No. 90 of the People's Government Order No. 90 of 30 April 1998 on the revision of the Government Regulation of Agricultural Machinery in the Province of San Suu Kyi, the first revision of the Decision on Amendments to the Regulations of the Government of 10 provinces, No. 175 of 31 October 2004 concerning the Modification of the Methods of Control in Oriental Province) Chapter I General Article 1 guarantees the safety of State, collective property and the property of the people, in line with the relevant laws, regulations and regulations, and in the light of the actual practice of my province. Article 2 Article 3 states that public safety technologies are protected by the use of scientific and technological means to prevent and combat criminal acts such as theft, robbery, destruction and abuse and to maintain public safety activities. Technician products are used for technical preventive activities, with specialized equipment for the functions of intrusion detection, protection of robbers, access control and safety inspections. Technician works refer to a security-prevention system, which is aimed at maintaining public safety, to be integrated in the use of technic products. Article IV. The public safety authority is the competent authority for the protection of public safety technologies, and the executive branch, such as the administration of business administration, construction, technical supervision, are governed by their respective responsibilities. Article 5 Urban planning and construction design sectors should incorporate public safety technology preventive facilities into planning and design norms that provide for the overall design of new construction, alteration and expansion projects within the scope, including public safety technology preventive facilities and budget inclusion. The use units of technic products and technic works should be developed to develop the use, maintenance, maintenance and updating system for public safety technology preventive devices, to implement preventive measures and to continuously improve the security prevention system. Article 7. Production, sale, use units for technic products, design, construction, use units for technic engineering, shall be subject to the State's relevant confidentiality provisions, limiting the extent to which persons are informed and registered. Chapter II Article 8: The following places and departments must take public safety technology preventive measures: (i) Arms, ammunition banks; (ii) The location of national confidential files and information; (iii) Concrete storage of warehousings and places of storage of dangerous goods such as fuel, trajectory, pyrethroid, national control of medicines, radioactive substances; (iv) The pool of financial institutions and the place of business; (v) Museums, book shops and stereotypeds, collection of important books and treasury sites; (vi) The important warehouses of the system, such as trade, finance, goods and services, and the storage of high-function commodities and important production materials; (vii) The unit's treasury room and the central storage of cash, securities and valuable items; (viii) Establishment of new urban residential areas; (ix) Other places and places under the laws, regulations and regulations. Article 9. The units that have been installed in the police units should be gradually connected with local public security authorities and the defence sector, creating a multi-tiered network of police stations, making rapid reactions and ending criminal activities in a timely manner. Article 10 State organs, social groups, business units shall be headed by a unit or a legal representative, with the guidance of the public security authority, and shall be responsible for the protection of public safety technology in this unit. Chapter III Article 11 Production, sale of technic products shall be licensed by the public security authorities of the province. The units for the production, sale of technic products may apply directly to the public security authorities of the municipality in the place, to the immediate public security agency of the provincial people's government, to the railway public security authorities (hereinafter referred to as “the municipal public security agency”), or to the provincial authorities. The use of industrial product production licensing systems, quality certification systems, is governed by national regulations. Article 12 (i) Products have national standards, industry standards or local standards. Without the above-mentioned criteria, it is necessary to establish enterprise standards and to report on the review of the provincial technical supervision and the provincial public security authorities; (ii) The samples are tested or qualified by the statutory test body; (iii) Other conditions set forth in laws, regulations and regulations. Article 13 A licenses for the sale of technic products must have the following conditions: (i) There are fixed operating sites; (ii) The products to be sold are legally produced; (iii) A well-established system of admission and sale of registration; (iv) Other conditions set forth in laws, regulations and regulations. Chapter IV Article 14. The design, construction units shall have the following conditions: (i) A license of business of a legal person; (ii) More than 6 Professional technicians; (iii) The necessary testing, probationary instruments and equipment; (iv) A well-established system of quality assurance of the security technology preventive system; (v) Other conditions under the law, regulations and regulations. The design, construction units shall inform the public security authorities of the above-mentioned provisions within 30 days of receipt of a business licence. Article 15. Oversight inspections used in the construction of technics are governed by a level of risk and investment. The Ministry of Public Safety has issued a level of risk and protection, which is prescribed by regulation; the amount of up to 300,000 dollars for engineering investments is managed by the municipal public security authorities, and the investment amount of more than 300,000 dollars is managed by the provincial Government's public security authorities. The design, programme logging, approval, construction, inspection and maintenance of technic works should be implemented in accordance with relevant national provisions and standards. Article 17 experienced non-qualified technical defence works, construction units should be restructured within a period of time and, within three months, requests for re-entry. Chapter V Legal responsibility In violation of this approach, one of the following acts has been fined to the unit of more than 1000 dollars; the transfer of the judiciary to justice by law: (i) No security-related preventive measures, as prescribed; (ii) The unauthorized production and sale of technic products; (iii) The production, sale of technic products is not in accordance with the relevant standards or the sale of technic products that are not licensed to produce licences; (iv) Inadequate access to the design, construction; (v) The design programme for technic engineering, which, according to the State's provisions, should be inspected without unauthorized construction; (vi) Technical defence works are not experienced or receive qualified inputs. In violation of article 14, paragraph 2, of this approach, the design, construction units did not communicate to the public security authorities the order was changed, warned and punished with a fine of 1000. Article 20 imposes administrative penalties on the punishment authority and may apply for administrative review or administrative proceedings in accordance with the provisions of the relevant national legislation. Article 21, Public safety technology preventive managers abuse their duties, play negligence, favouring private fraud, are governed by the law by the competent units, which constitute crimes and are held criminally by law. Annex VI Article 2 |
