Key Benefits:
(Adopted by the 17th ordinary meeting of the Government of the Youth of 10 May 2005) Chapter I General Article 1. Improving the application of new wall materials and the management of buildings, improving the building structure and building use functions, protecting land resources and the ecological environment, enhancing energy use and promoting sustainable economic and social development, and developing this provision in line with the provisions of the relevant legislation. Article 2 Article 3 refers to the new type of material referred to in this Article to the corresponding product criteria for the production of non-soiled material, such as powders, beds, end mines and sludges, for construction materials for the building of the wall. This provision refers to the application of energy-efficient technologies, materials, equipment and products, in accordance with the relevant provisions and standards available in the construction activities, to enhance the efficiency of the building-saving heat and heating heating systems, to reduce heating, refrigeration, the depletion of lighting and the rational and effective use of energy. Article IV Removal services are administrative authorities in this city. The construction of the executive branch at the municipal, district level (zone) is an industrial authority responsible for the application of new wall materials within the jurisdiction and the management of buildings, with the addition of material materials to the construction management structure (hereinafter referred to as a fiduciary change management body) specifically responsible for the application of new wall materials and the management of day-to-day supervision of the construction section. In accordance with their respective responsibilities, the executive branch, such as the issuance, finance, tax, quality, environmental protection, planning, land resources management, and municipal utilities, should be able to use new wall material for management related to construction. Article 5 The municipal wall correctional management body should develop technical policies, economic policies and corresponding technical standards and protocols for the application of new types of wall materials and the availability of construction sections to organize implementation after approval by the relevant departments. The power management structure should organize, coordinate the scientific, production and extension of new wall materials and the management of facilities and products, as well as monitor the use of wall materials in construction works and the implementation of the standards of building energy. Article 6 provides recognition and incentives to units and individuals that make significant achievements in the development of new wall materials and in the promotion of applications. Introduction Article 7. The Government of the people at the district level should incorporate the development of new wall materials into national economic and social development plans and encourage support for the development of new types of materials. Article 8 incorporates into national products of new walls' material inventories and enjoys national tax incentives in accordance with the law. Units and individuals for research development and extension of the application of new types of materials are prioritized in the context of the establishment, use and funding of their fixed asset investment projects. Article 9. New types of materials produced businesses should implement the quality standards of products developed by the State, industry and localities, with no national, industry, local standards, should be established in accordance with the law and be reported to the executive branch of the municipal quality technical supervision and to the municipal wall management authorities. New types of wall material prohibiting the production, sale of falsely false and non-product quality standards or substandards. No units or individuals may be created, expanded to produce a bakery and production line. The commune sector should conduct a governance refurbishment of existing brick production enterprises, such as construction, home resource management, planning, value, tax, etc., and measures such as administrative, economic and other measures aimed at gradually locking or rehabilitating the production of bricks. The existing brickwa production of new types of wall materials for the transfer of bakers and other habeas production. Article 11. New construction, expansion, alteration of various construction works and their subsidiary facilities within the city's administration, the prohibition of the use of live brickwa, and the use of new wall materials by farmers in their homes. Article 12 Chapter III Article 13. The design and construction of construction works should be rigorously implemented in the design of standards, construction norms and inspection criteria, and in the use of energy-efficient structures, materials, equipment and products, and in order to increase the resilience of tenure, reduce the consumption of heating, refrigeration, lighting. Article 14 shall take the following measures: (i) Separate treatment of walls, roofs, etc. of the building blocks; (ii) The outside window should be used in a standard saving window; (iii) The centralized heating system for residential buildings should be designed and installed in accordance with heat measurements, sequential temperature regulation, and the introduction of efficient plumbing techniques, materials and equipment, and the progressive introduction of heat-metric charges; (iv) The lighting work in the buildings should be reasonably chosen for lighting and selection of energy-efficient products, reduce lighting and improve the quality of lighting, and be installed in the corridors of residential buildings, in the building ladder. Both buildings do not meet the standards of building energy and should be gradually renovated to their peripheral structures and heating heating systems. The construction of the executive branch should be organized with the approval of the revamped management to prepare the rehabilitation planning and annual plan for the same-ranking people. The energy-efficient management of buildings should be carried out by the energy-efficient administration to promote the rational and efficient use of energy. Article 15 encourages the development and diffusion of the application of building energy technologies, materials and products in construction activities. Research on the development, diffusion of renewable energy applications is encouraged. Article 16 Industrial production enterprises should implement the quality standards of products developed by the State, industry and localities, with no national, industry and local standards, should establish corporate standards in accordance with the law and report on the approval of the executive branch of the municipal quality technical supervision and the municipal wall management body. The production, sale of falsely false and unproduct quality standards or substandard construction items are prohibited. Article 17 Construction projects that do not have reasonable standards and subsections to design norms shall not be approved by the organs authorized under the law; after the construction of the project, there is no reasonable use of the standards and the formula that can be designed. After the construction of the construction section, the management of the walls should monitor the quality of the construction section and the completion of the post-Water management body should identify the construction section and incorporate the completion of the work clearance process. There is a need to test the energy efficiency of the construction section, which should be commissioned to carry out the testing by a body with a corresponding measurement of qualifications. Chapter IV Safeguards Article 19 Construction units should be designed to organize the completed inspection, as required by the application of new wall materials and the standard of building. The design units should be designed in accordance with the application of new types of materials and the construction of standard norms, and be responsible for the quality of design. The construction units should be constructed in accordance with the application of new wall materials and the construction schedule, design documents and construction protocols, and be responsible for the quality of the construction. The Engineering Architecture Unit shall not agree with the installation and use of its construction work in respect of the design requirements that are not in line with the application of new walls and the construction of buildings that are not certified. Article 20, when the construction map review body conducts a review of the construction map design document, it should be noted that it does not meet the requirements for the application of new wall materials or does not meet the requirements for the design of the section. After a review of the adoption of the construction map design document, changes in the material and energy efficiency measures of the wall should be revisited. The construction engineering project, which was reviewed in the construction map design document, should be presented to the management body for the construction of the wall at the project site. Article 21, a new type of material and a construction energy production (or agent) enterprise, which provides for quality certification in accordance with the State's regulations on product quality certification, shall be made available to the municipal wall management body. Article 2 The specific funds for new types of wall material are charged, returned and managed in accordance with the relevant provisions of the State, the province and the city. Chapter V Legal responsibility Article 23, in violation of article 9, article 16 of the present article, provides that the production, sale of falsely false and product quality standards or products that are not subject to standards are punishable by law by the executive branch such as quality technical supervision, business and business. Article 24, in violation of article 10 of the present article, allows for the construction, expansion of the bak production enterprise and production line, to be converted by the construction of administrative orders and fines of $300,000. Article 25, in violation of article 11 of the present article, provides for the use of chewing brickwa, to be converted by the construction of an administrative order and a fine of $300,000. The construction of works, construction, treasury and completion tests have not been carried out in accordance with the standard of construction, and are punishable by law by the construction of the administration. Article 26 may apply for administrative review or administrative proceedings in accordance with the law. The parties had failed to comply with administrative sanctions decisions, and the organs that had made administrative sanctions decisions had applied to the People's Court for enforcement by law. Article 27 provides administrative disposal by staff members of the executive branch in the use of new walls and in the management of buildings, incurring negligence, abuse of authority, provocative fraud, by their offices or the relevant authorities; and constitutes a crime, with criminal responsibility under the law. Annex VI Article 28 |
