Special operations personnel safety training and examination regulations
(May 24, 2010 the State administration of work safety announced 30th come into force on July 1, 2010) Chapter I General provisions
First in order to standardize the evaluation of work-safety technology training for special operations personnel, and improve the safety level of special operations personnel, prevent and reduce accidents, according to the work safety law, the administrative licensing law and other relevant laws, administrative regulations, this provision is enacted.
Article production and operation units of special operations personnel safety technology training, assessment, certification, review and supervision, these provisions shall apply.
Relevant laws and administrative rules and regulations of the relevant provisions of special operations personnel management, from its provisions. Third special operations in these rules refers to accident prone, operators themselves, others ' safety, health and the safety of equipment and facilities that may cause significant hazards in the work.
List of special operations ranging from special operation provisions.
Special operations personnel in these rules refers to direct workers engaging in special operations.
Fourth special operations personnel shall comply with the following conditions:
(A) 18 years of age, and no longer than the national statutory retirement age;
(B) qualified through community health or medical institutions above the county level examination, does not preclude the special operations of structural heart disease, epilepsy, and Meniere's disease, Vertigo, hysteria, Parkinson's disease, psychosis, dementia and other diseases and physical defects;
(C) with the junior high school and above;
(D) have the necessary safety and technical knowledge and skills;
(V) other conditions stipulated in special operations.
Special operations personnel with the exception of dangerous chemicals in accordance with the preceding paragraph (a), (b), (d) and (e) provision of conditions, should have high school or the equivalent of a high school education and above.
Fifth special operations personnel must be approved by a special technical training and examinations, obtain the People's Republic of China special work permit (hereinafter referred to as special work permits), before they can post.
Sixth special operations personnel safety technology training, assessment, certification, reviewed implementation of unified regulation, classification, the principle of the separation of teaching and examination.
Seventh State administration of work safety (hereinafter referred to as the Security Administration) to guide and supervise the national special operations personnel safety technology training, assessment, certification and review; of provinces, autonomous regions and municipalities work safety supervision and management departments are responsible for the administrative region of special operations personnel safety technology training, assessment, certification and review.
National coal mine security monitored Council (following referred to coal mine Ann prison Council) Guide, and supervision national coal mine special job personnel (containing coal mine mine using of special equipment job personnel) of security technology training, and assessment, and sent card, and review work; province, and autonomous regions, and municipalities Government is responsible for coal mine special job personnel assessment sent card work of sector or specified of institutions is responsible for this administrative coal mine special job personnel of security technology training, and assessment, and sent card, and review work.
Province, and autonomous regions, and municipalities government safety supervision management sector and is responsible for coal mine special job personnel assessment sent card work of sector or specified of institutions (following collectively assessment sent card organ) can delegate set district of city government safety supervision management sector and is responsible for coal mine special job personnel assessment sent card work of sector or specified of institutions implementation special job personnel of security technology training, and assessment, and sent card, and review work.
Article eighth special operations personnel safety technology training, assessment, certification, review of the violations committed, no unit or individual shall have the right to State administration of work safety, coal mine safety supervision Bureau and the provincial, autonomous region, municipality and district municipal work safety supervision and management departments, responsible for special operations personnel appraisal certification of coal mine sector or other designated agency reported.
Nineth special operations personnel, shall be subject to the appropriate security technologies that are engaged in special operations training and hands-on training.
Have access to vocational high schools, technical schools and secondary education graduates majored in special operations, holding qualifications through examination and certification authorities may be exempted from the relevant professional training.
Across the provinces, autonomous regions and municipalities directly under the special operations personnel employed, you can attend training at domicile or business location.
Tenth special operations personnel safety technology training institution (hereinafter referred to as training institutions), must be obtained in accordance with the relevant provisions after the qualification certificate of safety training, safety technical training before engaging in special operations personnel.
Safety technical training of special operations personnel of the training agencies, should develop appropriate training programs, teaching arrangements, reviewed and reported to the relevant examination issuing organ, for the record.
11th training institutions should be in accordance with the State administration of work safety and coal mine safety supervision Bureau of special operations personnel of the training program and special operations personnel training program of coal mine safety technology training for special operations personnel.
Chapter III examination certification 12th special operations personnel examination including the examination and audit in two parts.
Examination by the evaluation unit is responsible for issuing authority or its delegate; auditing examination issuing organ is responsible for.
State administration of work safety and coal mine safety supervision Bureau formulated special operations personnel, coal mines, special operations personnel appraisal standards and the establishment of appropriate examination.
Assessment certification authority or its delegate shall be in accordance with the State administration of work safety, coal mine safety inspection Bureau uniform appraisal standards for evaluation.
Article 13th participation in special operations personnel qualification examination shall complete the examination request form, by the applicant or the applicant's employer qualifications training certificate issued by a training institution or to the applicant's domicile or business location of assessment apply to the issuing authority or its delegate units.
Assessment certification authority or its delegate unit upon receipt of the application, shall, within 60 days of test. Special operations qualifications examinations including security technology theory test and practical test in two parts. Failing the exam, permitted to take make-up tests 1.
Failed in the exam, retake the appropriate security training.
Article 14th examination issuing organ entrusted with special operations units shall have corresponding qualification examination of the premises, facilities, equipment and other factors, and establish appropriate management systems, and publicize the charges and other information.
15th check-issuing authority or entrusted with special operations units operation qualification examination shall be released within 10 working days after the end of the examination score.
16th section in accordance with the provisions of article fourth and qualified special operations personnel, should present to their domicile or examination issuing organ, where the employees apply for special work permits and submit copy of ID card, education certificate, medical certificate, examination certificates and other materials. Article 17th examination issuing organ receiving the application shall, within 5 working days to complete the review of application materials submitted by special operations personnel, to accept or not to accept the decision.
To make a decision on the spot, shall be made on the spot decision; the application materials are incomplete or do not meet the requirements, it shall immediately or within 5 working days once inform all applicants need to supplement the content, fails to inform, as from the date of receipt of the application materials that have been accepted. An application has been accepted by the 18th, check-issuing authority shall, within 20 working days to complete the audit work.
Qualified, special work permits issued; does not meet the criteria, it shall explain the reasons.
19th special operations permit is valid for 6 years, effective throughout the country.
Special work permits design centrally by the State administration of work safety, standards and coding.
20th special operations certificate is lost, written applications shall be submitted to the original examination issuing organ, after approval by the original examination issuing organ, be issued retrospectively.
Special operations certificate records information changed or damaged, written applications shall be submitted to the original examination issuing organ, after review by the original examination issuing organ is confirmed, be replaced or updated.
The fourth chapter reviews
21st special operations permit review 1 every 3 years.
Special operations personnel during the period of special work permits, in the trades for more than 10 years in a row, in strict compliance with the relevant safety regulations, certificate Office or employment is located by the original evaluation evaluation license-issuing organs, special work permit review time may be extended to 6 years 1.
22nd special operations permit needed for review, shall, before the expiration of 60 days, to the original assessment by the applicant or the applicant's employer issuing authority or examination issuing organ, where practitioners apply and submit the following materials:
(A) the community or the health certificates issued by hospitals above the county level;
(B) engaging in special operations;
(C) safety training and examination records.
Special operations expiry delay replacement, in accordance with the provisions of the preceding paragraph shall be applied for extension of review.
23rd special operations permit, apply for a review or extension before the review, special operations personnel should be involved in the necessary safety training and examination.
Not less than 8 hours of safety training, major laws, regulations, standards, training accidents and related knowledge of new technologies and new equipment. Section 24th for review, examination issuing organ should be completed within 20 working days from the date of receipt of the application for review.
Eligible for review, check issuing authority's signature, registration, confirm; not qualified, with justification.
Application for extension of review, review after passing examination issuing organ reissue special work permits.
25th special operations personnel have one of the following circumstances, review or extension of reexamination is not through:
(A) failed to pass the physical examination;
(B) illegal operation causing serious consequences, or 2 or more illegal behavior, and have been confirmed;
(C) safety offences and administrative penalties;
(D) refuse or obstruct work safety supervision departments of supervision and inspection;
(E) security training is not required to participate in or fail to pass the examination;
(F) the circumstances prescribed in the provisions of article 30th, 31st.
26th Special work permit review 25th or deferred for review in accordance with the provisions of article (b), (c), (d), (e), in accordance with the provisions of safety training again after passing the examination, and then go through the review or extension of review procedures.
Review, extension of reexamination is not qualified, or fails to review, special work permits expired.
27th the applicant disagrees with the review of review or extension, may apply for administrative reconsideration or bring an administrative suit.
Supervision and administration of the fifth chapter
28th test certification authority or its delegate body and its staff shall be devoted to their duties, adhere to the principle of honesty and self-discipline, in accordance with provisions of law and rules and regulations for special operations personnel appraisal, certification, review, and accept supervision by the community.
29th evaluation license-issuing organs should strengthen supervision and inspection of special operations personnel, found its provisions article 30th case, timely revocation of special work permits; for safety violations should be given administrative punishments according to law, in accordance with the relevant provisions of the law on production and business operation entity and its special operations personnel to implement administrative punishments.
Investigate the issuing administration shall establish a special operations personnel management information system to facilitate employers and public queries; cancellation of certificates of special operations special operations personnel, shall be announced to the public in a timely manner.
30th under any of the following circumstances, examination certification authorities shall withdraw special work permits:
(A) over special operations certificate validity was not extended review;
(B) special operations personnel's physical condition is not suitable to continue engaging in special operations;
(C) responsible for production safety accident occurs;
(D) special work permits recording of false information;
(E) by fraud, bribery or other improper means to obtain a special work permit.
Special operations personnel who violate the preceding paragraph (iv), (v) of 3 years may not apply again for special work permits.
31st under any of the following circumstances, examination certificate shall be revoked for special operations the certificate:
(A) the death of special operations personnel;
(B) apply special operations officer;
(C) special work permits were revoked.
32nd out of special operations personnel of the special job positions for more than 6 months, should repeat the practice exam and qualified before the post confirmed.
33rd people's Governments of provinces, autonomous regions and municipalities directly under the safety supervision and management departments and responsible for the coal mine special operations personnel appraisal certification of Department or other designated agency shall in each to the State administration of work safety, coal mine safety inspection Bureau evaluation certification reports special operations personnel.
Article 34th training institutions should be implemented in accordance with the relevant regulations of safety technology training for special operations personnel, to any institution or individual shall not lend, rent safety training certificate.
35th production and business operation entities shall strengthen the management of special operations personnel of the unit, and establish and improve special operations training, review archives, reporting, training, examination, review of the Organization's work and daily inspections.
Article 36th special operations personnel after the expiration of the labor contract changing workplace, work shall not attach his special work permits for any reason.
Across provinces, autonomous regions and municipalities directly under the location of a special operations personnel shall be subject to professional practitioners examination issuing organ of supervision and management.
37th production and business operation entities shall not print, counterfeiting, reselling for special operations certificate, or use illegal printing, forgery, sale or resale certificate of special operations.
Special operations personnel shall not be forged, altered, lend, transfer, used for special operations certificate or the use of forged certificates of special operations.
Chapter Sixth penalty
Article 38th test certification authority or its delegate units and their staff in special operations personnel appraisal, certification and review abuse of power, negligence, malpractice, shall be given administrative sanctions constitutes a crime, criminal responsibility shall be investigated according to law.
39th production and business operation entities do not establish special operations personnel files, given a warning and a fine of up to 10,000 yuan.
40th production and business operation entity without obtaining the certificate of special operations special operations personnel posts, a rectification; fails to rectify, order to suspend for rectification, and a fine of up to 20,000 yuan.
Coal mining enterprises to use without obtaining the certificate of special operations special operations personnel posts, in accordance with the special provisions of the State Council on coal mine production safety accident prevention provisions.
41st production business unit illegally printed, counterfeiting, reselling for special operations certificate, or use illegal printing of special work permits, counterfeiting, reselling and give a warning, and a fine of less than 10,000 yuan and 30,000 yuan constitutes a crime, criminal responsibility shall be investigated according to law.
42nd special operations personnel who forge, alter special work permits or use fake certificates of special operations and give a warning, and between 5000 and 1000 Yuan fine.
Lend, transfer, used by special operations personnel special work permits, give a warning, and a fine of 2000 more than 10000.
Article 43rd training institutions in breach of the safety technology training for engaging in special operations personnel, in accordance with the relevant provisions shall be given administrative punishment.
The seventh chapter by-laws
44th special operations personnel training, exam fees, by provinces, autonomous regions and municipalities in conjunction with special operations personnel responsible for coal mine production safety supervision and management departments assessment Certification Department or agency designated by a unified, implemented after being approved by the people's Government at the price, the financial sector, issuing authority certificate fee by the assessment in the budget at the same level.
45th people's Governments of provinces, autonomous regions and municipalities directly under the safety supervision and management departments and responsible for the coal mine special operations personnel appraisal certification of Department or other designated bodies can be combined with the local area, formulate rules for its implementation, State administration of work safety and coal mine safety supervision Bureau. 46th article of the regulations come into force on July 1, 2010.
On July 12, 1999 issued by the State economic and Trade Commission in the special operations personnel safety training and examination regulations (the former State economic and Trade Commission, the 13th) repealed simultaneously.
Annex: list of special operations
1 electrical jobs
Refers to the operation and maintenance of electrical equipment, installation, maintenance, renovation, construction, commissioning, operations (not including power system into operation).
1.1 high voltage electrician
Refers to 1000 kV (KV) and more for high voltage electric equipment in operation, maintenance, installation, repair, alteration, construction, commissioning, testing and insulation works, apparatus for testing job.
1.2 low voltage electrician
Refers to 1000 kV (kV) low voltage electrical equipment installation, commissioning, operation, maintenance, repair, renovation, construction and test operations.
1.3 electrical jobs
Refers to a variety of explosion-proof electrical equipment installation, repair and maintenance work.
Apply besides the underground coal mine explosion-proof electric operation.
2 welding and thermal cutting
Refers to the use of welding or cutting on material processing operations (excluding the provisions of the regulations on safety supervision over special equipment operation).
2.1 melting welding and thermal cutting
Using localized heating method will connect the metal or other material is heated to a molten state and complete welding and cutting work.
Suitable for oxyacetylene welding and cutting, arc welding electrode and carbon arc gouging and submerged arc welding, gas shielded arc welding, plasma arc welding, electroslag welding, electron beam welding, laser welding, flux cutting, laser cutting, plasma cutting and other operations.
2.2 pressure welding
Refers to the use of welding welding jobs done it under pressure.
Suitable for resistance welding, pressure welding, explosive welding, friction welding, cold welding, ultrasonic welding, forging and welding operations.
2.3 brazing jobs
Use than the base metal of low melting point materials for brazing, welding and brazing heating above the melting point of solder, but much lower melting point temperatures, using liquid solder wetting material, fill the joint gap and connect with the diffusion and implementation of parent metal welding operations.
Apply to flame brazing operation, resistance brazing operations welding, dip brazing, induction brazing operation, furnace brazing operations, excluding iron soldering job.
3 works at heights
Exclusively or frequently falling height base-2 m and more than likely falls from high places work.
3.1 ascended erecting work
High span erection or dismantling of scaffolding, operations.
3.2 high installation, maintenance, and demolition work
High installation, maintenance and removal operations.
Applies to the use of special equipment for Interior and exterior decoration, cleanliness, decoration, erection of electric power, telecommunication lines, pipe erection on high, high in the small air conditioning installation, repair, equipment facilities and installation of outdoor advertising facilities, repair, maintenance and demolition of high buildings, equipment facilities.
4 refrigeration and air conditioning jobs
For medium and large refrigeration and air-conditioning equipment operation, installation and repair work.
4.1 operation of refrigeration and air conditioning equipment operation jobs
Refers to various types of production and operation of enterprises and business units of large and medium refrigeration and air conditioning equipment operation jobs.
Applies Yu chemical class (petrochemical, and chemical, and gas liquefied, and process sex air conditioning) production enterprise, mechanical class (cold processing, and cooling, and process sex air conditioning) production enterprise, food class (brewing, and beverage, and frozen or frozen conditioning food, and process sex air conditioning) production enterprise, agricultural and sideline products processing class (slaughter and the meat food processing, and aquatic processing, and fruits and vegetables processing) production enterprise, warehouse class (cold storage, and frozen processing, and business ice) production business enterprise, transport class (refrigerated transport) business enterprise, service class (telecommunications room, and sports venues, and
Construction of central air conditioning) operating companies and business units of large and medium refrigeration and air conditioning equipment operation jobs.
4.2 installation of refrigeration and air conditioning equipment-repair
Refrigeration and air conditioning equipment referred to in 4.1 machine, components and related systems installation, commissioning and maintenance work.
5 coal mine safety work
5.1 underground electrical jobs
Engaged in coal mine mechanical and electrical equipment installation, commissioning, inspection, maintenance, and troubleshooting, ensure the safety of this equipment operations.
Applies to live together with coal and the associated tunnel exploration, mine development, mine electrical clamp in the process of mining operations.
5.2 underground blasting operations
Jobs in coal mine blast.
5.3 coal mine safety monitoring and control operations
Engaged in coal mine safety monitoring and control system installation, commissioning, inspection, maintenance, ensure the safety of its operations.
Apply to live together with coal and the associated tunnel exploration in the construction, mining, mine safety monitoring and control operations.
5.4 gas check
Engaged in coal mine gas-inspection, ventilation facilities within the jurisdiction responsible for the good conditions of ventilation, gas checks, as required to fill in a variety of records, deal with or report problems found jobs in a timely manner.
Apply to symbiosis and the associated with coal mine construction and mining process of coal mine gas detection work.
5.5 coal mine safety work
Engaged in coal mine safety supervision and inspection, safety facilities and safety inspection of workplaces to check jobs and grapple with the corresponding accident.
5.6 operation of coal mine hoist operation
Operation coal mine hoisting equipment to transport personnel, ore, waste and materials, and is responsible for inspection and record-running jobs.
Applicable to the operation of coal mine hoisting machines, including, dark shaft of vertical shaft hoist, inclined, dark inclined shaft hoist and open-pit mine slope winch hoist operation.
5.7 coal mining machine (TBM) operations jobs
Refers to coal mining face in coal mining, tunneling operation machines, boring machines, coal, coal, excavation work, responsible for Shearer and tunneling machine inspection and operation records, ensure the safety of coal mining machine, boring machine operation.
Applies to mining, boring Shearer, tunnel boring machine operation in the process.
5.8 gas drainage in coal mine operation
Engaged in coal mine gas drainage hole, sealed, gas flow and gas extraction equipment operation, ensure the safety of gas drainage for homework.
Applicable to coal mines, and paragenetic and associated coal mine construction, mining in the ground and underground gas drainage in coal mine operations.
5.9 outburst coal mine jobs
Engaged in coal and gas outburst prediction, parameters collection and analysis, prevention outburst measures of inspection and inspection, prevention effect to ensure prevention of job security.
Applicable to coal mines, and paragenetic and associated coal mine construction and mining process of coal and gas outburst in coal mine operations.
5.10 mine survey water jobs
Engaged in exploration in coal mine drainage prediction, related parameter collection and analysis, survey water enforcement and inspection, verification, and so on, make the water safe for work.
Applicable to coal mines, and paragenetic and associated coal mine construction, mining exploration in coal mine drainage in the process operation.
6 metal and Nonmetal mine safety and job
6.1 for metal and Nonmetal mine ventilation jobs
Installation of underground local fan, operation ground main fan and underground local fan and auxiliary fan, operation, maintenance, ventilation structures in mine, mine dust, mine ventilation systems up and running to ensure local ventilation, choking dust to prevent poisoning, such as homework.
6.2 tailings operations
Ore tailings, dams, visiting dam, flood pumping and drainage facilities in operation.
Applicable to metal and Nonmetal Mines tailings operations.
6.3 Metal-Nonmetal mine safety inspection work
Metal and Nonmetal mine safety supervision and inspection, safety facilities and safety inspection of workplaces to check jobs and grapple with the corresponding accident.
6.4 Metal-Nonmetal mine hoist operation jobs
Manipulation of metal and Nonmetal mine hoisting equipment to transport personnel, ore, waste and materials, and is responsible for inspection and record-running jobs.
Applicable to metal and Nonmetal mine hoist, including shafts, blind shaft hoist, inclined, blind incline shaft hoist and open-pit mine slope winch hoist operation.
6.5 pillar in metal and Nonmetal Mines jobs
Checked at the underground roadway and the stability of Stope roof, side, pry pumice, supporting operations.
6.6 for metal and Nonmetal underground electrical jobs
Metal and Nonmetal mine electromechanical equipment installation, commissioning, inspection, maintenance and troubleshooting, ensure the safety of electrical equipment jobs.
6.7 for metal and Nonmetal mine draining
Metal and Nonmetal mine drainage equipment for use, maintenance and inspection work.
6.8 Metal-Nonmetal mine blasting
Means of blasting in open pit and underground operations.
7 oil and gas safety
7.1 the driller jobs
Oil, gas exploitation in the process of operation of lifting drill for drilling operations.
Apply to onshore oil and natural gas driller (drilling driller and driller, job exploration driller).
8 metallurgical (colored) production safety work
8.1 gas jobs
Metallurgical, nonferrous metal companies engaged in gas production, storage, transportation, use, maintenance and repair work.
9 safe operation of hazardous chemicals
Hazardous chemical process operation and automatic control instruments installation, repair and maintenance work.
9.1 phosgene and phosgenation process
Light gas phosgene synthesis, as well as the factory storage, conveyance and use of post operation.
Applies to carbon monoxide and chlorine reaction of phosgene, phosgene synthesis gas, triphosgene, phosgene synthesis of polycarbonate, toluene diisocyanate (TDI) preparation, 4,4 ′--Diphenylmethane diisocyanate (MDI) production process operation job.
9.2 the chlor-alkali electrolysis process
Sodium chloride and potassium chloride electrolyte, filling of liquid chlorine storage and post assignments.
Applicable to sodium chloride (salt) aqueous electrolytic production of chlorine and sodium hydroxide, hydrogen, electrolytic production of chlorine and potassium chloride in aqueous potassium hydroxide, hydrogen and other processing operation job.
9.3 chlorination process
Refers to the liquid chlorine storage, gasification and reaction post homework.
Apply to replace chlorinated, plus chloride, chloride process operations, such as operation.
9.4 nitrification process
Nitration reaction and distillation separation job assignments.
Suitable for direct nitration, indirect method of nitration, nitrosation process of law operation job.
9.5 ammonia process
Stored compressed, liquid ammonia, ammonia synthesis reaction post homework.
Applies to five energy-saving ammonia process method (AMV), Texaco coal-water slurry pressurized gasification, Kellogg method, method of joint production of ammonia and methanol, joint production of soda and ammonia alkali, catalyst, zinc oxide desulfurizer and catalyst for methane "three catalytic" method of gas purification process operation job.
9.6 cracking (FCC) process
Petroleum cracking of hydrocarbon raw materials (cracking) post jobs.
Applies Yu hot cracking business olefin process, heavy oil catalytic cracking business gasoline, and diesel, and propylene, and butene, b benzene cracking business styrene, II fluoride a chlorine methane (HCFC-22) hot cracking business have tetrafluoroethylene (TFE), II fluoride a chlorine ethane (HCFC-142b) hot cracking business have partial fluoride vinyl (VDF), tetrafluoroethylene and eight fluoride ring butane hot cracking business have six fluoride vinyl (HFP) process process of operation job.
9.7 fluorination jobs
Fluorination position assignments.
Applies to the direct fluorination, metal fluoride or fluoride hydrogen fluoride, replacement and other fluoride fluoride preparation of process operations such as operation.
9.8 the hydrogenation process jobs
Hydrogenation post homework.
Applied to unsaturated the triple bond and double bond hydrogenation of alkynes, olefins, aromatics, compounds containing oxygen and hydrogen, nitrogen-containing compounds hydrogenation oil hydrogenation process operations, such as operation.
9.9 diazo process
Diazotization, diazonium salt processing post homework.
Application of Yu Shun laws, anti-addition, nitrosyl sulfuric acid, copper sulfate catalyst method, and salting process operation job.
9.10 oxidation process
Oxidation reaction post homework. Applies Yu vinyl oxidation business ring oxygen ethane, methanol oxidation preparation formaldehyde, on xylene oxidation preparation Terephthalic acid, different c benzene by oxidation – acid solutions cogeneration phenol and acetone, ring has n-oxidation business ring has ketone, gas oxidation business acetylene, butene, and butane, and C4 fractions or benzene of oxidation business Shun butene II anhydride, o xylene or naphthalene of oxidation preparation o benzene II methyl anhydride, are four toluene of oxidation preparation are benzene four carboxylic acid II anhydride, acenaphthene of oxidation business 1,8 – naphthalene II methyl anhydride, 3 – methyl pyridine oxidation business 3 – pyridine carboxylic acid (smoke acid), 4 – Methyl pyridine oxidation business 4 – pyridine carboxylic acid (different smoke acid), 2 – b base has alcohol (different Xin alcohol) oxidation preparation 2 – b base has been acid (different bitter), on chlorine toluene oxidation preparation on chlorobenzene formaldehyde and on chlorine benzoic acid, toluene oxidation preparation benzene formaldehyde, and benzoic acid, on Nitro toluene oxidation preparation on Nitro benzoic acid, ring 12 alcohol/ketone mixture of open ring oxidation preparation 12 carbon II acid, ring has ketone/alcohol mixture of oxidation business has II acid, b two aldehyde nitric acid oxidation method synthesis b glucuronic acid,
Oxidation of butyraldehyde butyric acid and oxidation of ammonia to nitrate processing operations, such as operation.
9.11 peroxide process
Peroxidation, positions of peroxides storage operations.
Applicable to the production of hydrogen peroxide and acetic acid in the presence of sulphuric acid preparation of Peracetic acid and hydrogen peroxide in aqueous, acid anhydrides direct preparation of peroxy acids with hydrogen peroxide, benzoyl chloride and hydrogen peroxide alkaline solution of benzoyl peroxide preparation, as well as production by air oxidation of cumene hydroperoxide cumene process operations, such as operation.
9.12 amine process
Amine reaction post homework. Applies Yu o nitro chlorobenzene and ammonia reaction preparation o nitrobenzene amine, on nitro chlorobenzene and ammonia reaction preparation on nitrobenzene amine, between cresol and ammonium chloride of mixture in catalyst and ammonia role Xia generated between toluene amine, methanol in catalyst and ammonia role Xia preparation methyl amine, 1 – Nitro anthracene Quinone and excess of ammonia in chlorobenzene in the preparation 1 – amino anthracene Quinone, 2,6 – anthracene Quinone II sulfonic acid ammonia solutions preparation 2,6 – II amino anthracene Quinone, styrene and amine reaction preparation n – replaced benzene ethylamine,
Ethylene oxide or ethylene imine with amines or ammonia opening cycloaddition reaction preparation of Amino alcohol or amine, preparation of benzonitrile ammoxidation of toluene, propylene and ammonia oxidation of acrylonitrile process operation job.
9.13 sulfonation process
Sulfonation post homework.
Applies to method of sulfur trioxide, azeotropic water sulfonation, chlorosulfonic acid sulfonation, baking sulfonation, and sulfonation process sulfite process operations work.
9.14 polymerization process
Polymerization status job.
Suitable for polyolefin, PVC, synthetic fibers, rubber, latex, paint adhesives production and operation of fluoride polymerization process operations.
9.15 alkylation process
Alkylation refers to post homework.
Apply c--alkylation, n-alkylation –, processes such as alkylation of o--operation jobs.
9.16 chemical Automation control instrumentation jobs
Automatic control instruments installation, repair and maintenance of the system operation.
10 kilograms of fireworks safety
Engaged in Fireworks production, Stockpiling of the drug mixture, granulation, screening, charge, construction administration, medicine and hazardous processes such as handling operations.
10.1 pyrotechnic manufacturing jobs
Refer to pyrotechnic pieces, dispensing, mixing, granulating, filtering, drying and packaging operations.
10.2 black powder manufacturing operations
Refer to the tide of black powder drugs, plasma nitrate, bread, chips, oil pressure, polishing and packing operations.
10.3 fuse manufacturing jobs
Refer to fuse, pulp, painting, cutting and other operations.
10.4 kilograms of fireworks products drug-involved job
Refers to the Fireworks product processing in pressure, charge, construction administration, bei pharmacy, has charge of drilling operations.
10.5 kilograms of fireworks and firecrackers stored jobs
Fireworks warehouse, guardian, handling and other operations. 11 other job safety supervision administration