Key Benefits:
303. Regulation of the Federal Minister for Economic Affairs, Family and Youth, amending the Explosives Regulation
Pursuant to Section 123 (2), (3) and (7) of the Mineral Raw Materials Act, BGBl. I n ° 38/1999, as last amended by the Federal Law BGBl. I n ° 111/2010, the Regulation on the placing on the market of explosives and on the basic safety requirements for explosives (Explosive Ordnance), BGBl. II No 27/2001, as amended:
1. § 1 Z 1 reads:
| " 1. |
Explosives (explosives): substances and articles which are subject to the provisions of Directive 93 /15/EEC on the harmonisation of the provisions relating to the placing on the market and control of explosives for civil purposes, OJ L 327, 31.12.1993, p. No. 20, as last amended by the corrigendum OJ L 327, 28.12.1993, p. No. OJ L 59 of 01.03.2006 p. 43, as such, or are similar in composition and effect. These are explosives and detonating agents, but not pyrotechnic articles within the meaning of § 4 Z 14 of the pyrotechnic law 2010, BGBl. I No 131/2009; ' |
|||||||||
2. In § 1 Z 5, the expression "civil society of commercial law" by the expression "Registered civil society" replaced.
3. § 2 reads:
" Requirements for explosives
§ 2. Explosives intended to be used in mining shall be placed on the market and used only if they are used in the mining industry.
| 1. |
comply with the essential operational safety requirements laid down in this Regulation; |
|||||||||
| 2. |
have undergone a conformity assessment in accordance with the procedures referred to in Article 5; and |
|||||||||
| 3. |
shall be marked with the conformity marking described in § 7. " |
|||||||||
4. In § 4 (2) § 6 (2) and (3), § 8 (1) and (2), § 9 (1) and (3) as well as § 10 (2), the expression " "Federal Minister for Economic Affairs and Labour" by the expression "Federal Minister for Economic Affairs, Family and Youth" replaced.
5. The text of § 13 will become the sales designation "(1)" The following paragraph 2 shall be added to § 13:
" (2) § 1 Z 1 and 5, § 2, § 4 (2) § 6 (2) and (3), § 8 (1) and (2), § 9 (1) and (3), § 10 (2) and Annex II in the version of the BGBl Regulation. II No 303/2011 shall enter into force at the end of the month following the presentation of the contract. "
6. Annex II to § 4 reads:
" List of harmonised European standards
| - |
ÖNORM EN 13630-1: 2004 03 01-Norm: Explosives for civilian purposes-Explosive cords and safety suits-Part 1: Requirements; |
|||||||||
| - |
ÖNORM EN 13630-2: 2003 02 01-Norm: Explosives for civilian purposes-Explosive cords and safety suits-Part 2: Determination of the thermal stability of detonation cords and safety light cords; |
|||||||||
| - |
ÖNORM EN 13630-3: 2003 02 01-Norm: Explosives for civil purposes-Explosive cords and safety suits-Part 3: Determination of the sensitivity of the soul of detonation cords; |
|||||||||
| - |
ÖNORM EN 13630-4: 2003 02 01-Norm: Explosives for civilian purposes-Explosive cords and safety suits-Part 4: Determination of the impact sensitivity of detonation cords; |
|||||||||
| - |
ÖNORM EN 13630-5: 2004 03 01-Norm: Explosives for civilian purposes-Explosive cords and safety suits-Part 5: Determination of the resistance of detonation cords to abrasion; |
|||||||||
| - |
ÖNORM EN 13630-6: 2003 02 01-Norm: Explosives for civilian purposes-Explosive cords and safety suits-Part 6: Determination of the tensile strength of detonation cords; |
|||||||||
| - |
ÖNORM EN 13630-7: 2003 02 01-Norm: Explosives for civil purposes-explosive cords and safety suits-Part 7: Determination of the reliability of the detonation of detonation cords; |
|||||||||
| - |
ÖNORM EN 13630-8: 2003 02 01-Norm: Explosives for civil purposes-Explosive cords and safety suits-Part 8: Determination of the water resistance of detonation cords and safety light cords; |
|||||||||
| - |
ÖNORM EN 13630-9: 2004 07 01-Norm: Explosives for civilian purposes-Explosive cords and safety suits-Part 9: Determination of the detonation transmission of detonation cord to detonation cord; |
|||||||||
| - |
ÖNORM EN 13630-10: 2005 07 01-Norm: Explosives for civil purposes-explosive cords and safety suits-Part 10: Determination of the ignitability of detonation cords; |
|||||||||
| - |
ÖNORM EN 13630-11: 2003 02 01-Norm: Explosives for civilian purposes-explosive cords and safety suits-Part 11: Determination of the detonation speed of detonation cords; |
|||||||||
| - |
ÖNORM EN 13630-12: 2003 02 01-Norm: Explosives for civilian uses-detonation cords and safety suits-Part 12: Determination of the burning time of safety light cords; |
|||||||||
| - |
ÖNORM EN 13631-1: 2005 10 01-Norm: Explosives for Civilian Purposes-Explosives-Part 1: Requirements; |
|||||||||
| - |
ÖNORM EN 13631-2: 2003 02 01-Norm: Explosives for Civilian Purposes-Explosives-Part 2: Determination of the thermal stability of explosives; |
|||||||||
| - |
ÖNORM EN 13631-3: 2004 11 01-Norm: Explosives für civilian purposes-Explosives-Part 3: Determination of the sensitivity of explosives to the environment; |
|||||||||
| - |
ÖNORM EN 13631-4: 2003 02 01-Norm: Explosives für civilian purposes-Explosives-Part 4: Determination of the impact sensitivity of explosives; |
|||||||||
| - |
ÖNORM EN 13631-5: 2003 02 01-Norm: Explosives for Civilian Purposes-Explosives-Part 5: Determination of water resistance; |
|||||||||
| - |
ÖNORM EN 13631-6: 2003 02 01-Norm: Explosives for Civilian Purposes-Explosives-Part 6: Determination of the resistance to hydrostatic pressure; |
|||||||||
| - |
ÖNORM EN 13631-7: 2004 02 01-Norm: Explosives for Civilian Purposes-Explosives-Part 7: Determination of safety and reliability at extreme temperatures; |
|||||||||
| - |
ÖNORM EN 13631-10: 2004 02 01-Norm: Explosives for Civilian Purposes-Explosives-Part 10: Verification of the ignition method; |
|||||||||
| - |
ÖNORM EN 13631-11: 2004 02 01-Norm: Explosives für civilian purposes-Explosives-Part 11: Determination of the detonation forwarding; |
|||||||||
| - |
ÖNORM EN 13631-12: 2005 01 01-Norm: Explosives for Civilian Purposes-Explosives-Part 12: Fixation of reinforcings with different ignitability; |
|||||||||
| - |
ÖNORM EN 13631-13: 2003 06 01-Norm: Explosives für civilian purposes-Explosives-Part 13: Determination of density; |
|||||||||
| - |
ÖNORM EN 13631-14: 2003 06 01-Norm: Explosives für civilian purposes-Explosives-Part 14: Determination of the detonation speed; |
|||||||||
| - |
ÖNORM EN 13631-15: 2005 07 01-Norm: Explosives for Civilian Purposes-Explosives-Part 15: Calculation of thermodynamic properties; |
|||||||||
| - |
ÖNORM EN 13631-16: 2004 11 01-Norm: Explosives for Civilian Purposes-Explosives-Part 16: Explosives for subday use-Detection and measurement of toxic sidings; |
|||||||||
| - |
ÖNORM EN 13763-1: 2004 08 01-Norm: Explosivstoffe für civilian purposes-Zünder und Delay elements-Part 1: Requirements; |
|||||||||
| - |
ÖNORM EN 13763-2: 2003 02 01-Norm: Explosives for civil purposes-Igniders and delay elements-Part 2: Determination of thermal stability; |
|||||||||
| - |
ÖNORM EN 13763-3: 2003 02 01-Norm: Explosivstoffe für civilian purposes-igniter and delay elements-Part 3: Determination of the impact of sleep; |
|||||||||
| - |
ÖNORM EN 13763-4: 2004 01 01-Norm: Explosives for civilian purposes-igniters and delay elements-Part 4: Determination of the resistance of igniter wires and ignition hoses to abrasion; |
|||||||||
| - |
ÖNORM EN 13763-5: 2004 01 01-Norm: Explosives for civilian purposes-Ignors and delay elements-Part 5: Determination of the resistance of igniter wires and ignition hoses to cutting loads; |
|||||||||
| - |
ÖNORM EN 13763-6: 2004 01 01-Norm: Explosives for civilian purposes-igniters and delay elements-Part 6: Determination of the resistance of the insulation of igniter wires against crack formation at low temperatures; |
|||||||||
| - |
ÖNORM EN 13763-7: 2004 01 01-Norm: Explosives for civilian purposes-Ignors and delay elements-Part 7: Determination of the mechanical strength of igniter wires, ignition hoses, connections, accusation and closure; |
|||||||||
| - |
ÖNORM EN 13763-8: 2004 01 01-Norm: Explosivstoffe für civilian purposes-igniter and delay elements-Part 8: Determination of the resistance of explosive capsules against vibration; |
|||||||||
| - |
ÖNORM EN 13763-9: 2004 01 01-Norm: Explosivstoffe für civilian purposes-igniter and delay elements-Part 9: Determination of the resistance of detonators against bending stress; |
|||||||||
| - |
ÖNORM EN 13763-11: 2004 01 01-Norm: Explosivstoffe für civilian purposes-igniter and delay elements-Part 11: Determination of the resistance of detonators and delay elements against fall; |
|||||||||
| - |
ÖNORM EN 13763-12: 2004 01 01-Norm: Explosivstoffe für civilian purposes-igniter and retarder elements-Part 12: Determination of the resistance to hydrostatic pressure; |
|||||||||
| - |
ÖNORM EN 13763-13: 2004 05 01-Norm: Explosivstoffe für civilian purposes-Zünder und Delay elements-Part 13: Determination of the resistance of electrical igniters against electrostatic discharges; |
|||||||||
| - |
ÖNORM EN 13763-15: 2004 12 01-Norm: Explosives for civil purposes-Igniders and delay elements-Part 15: Determination of the ignition strength; |
|||||||||
| - |
ÖNORM EN 13763-16: 2004 03 01-Norm: Explosives for civilian purposes-igniters and delay elements-Part 16: Determination of delay accuracy; |
|||||||||
| - |
ÖNORM EN 13763-17: 2004 03 01-Norm: Explosivstoffe für civilian purposes-igniter and delay elements-Part 17: Determination of the non-contact current intensity of electric igniters; |
|||||||||
| - |
ÖNORM EN 13763-18: 2004 03 01-Norm: Explosivstoffe für civilian purposes-igniter and delay elements-Part 18: Determination of the series-ignition current of electric igniters; |
|||||||||
| - |
ÖNORM EN 13763-19: 2004 03 01-Norm: Explosives for civilian purposes-igniter and delay elements-Part 19: Determination of the ignition pulse of electric igniters; |
|||||||||
| - |
ÖNORM EN 13763-20: 2004 01 01-Norm: Explosivstoffe for civilian purposes-igniters and delay elements-Part 20: Determination of the total resistance of electrical igniters; |
|||||||||
| - |
ÖNORM EN 13763-21: 2004 03 01-Norm: Explosivstoffe für civilian purposes-igniter and delay elements-Part 21: Determination of the surge voltage of electric igniters; |
|||||||||
| - |
ÖNORM EN 13763-22: 2004 03 01-Norm: Explosives for civilian purposes-Ignoring and delay elements-Part 22: Determination of the capacitance, the insulation resistance and the breakdown voltage of the ignition wire insulation; |
|||||||||
| - |
ÖNORM EN 13763-23: 2003 02 01-Norm: Explosivstoffe für civilian purposes-igniter and delay elements-Part 23: Determination of the shock wave speed in ignition hoses; |
|||||||||
| - |
ÖNORM EN 13763-24: 2003 02 01-Norm: Explosivstoffe für civilian purposes-igniter and delay elements-Part 24: Determination of the electrical non-conductivity of ignition hoses; |
|||||||||
| - |
ÖNORM EN 13763-25: 2004 07 01-Norm: Explosives for civil purposes-igniters and delay elements-Part 25: Determination of the transmission capacity of surface connectors, retarders and connectors; |
|||||||||
| - |
ÖNORM EN 13763-26: 2004 11 01-Norm: Explosives for Civilian Purposes-Igniters and Delay Elements-Part 26: Definitions, procedures and requirements for equipment and accessories for the reliable and safe functioning of detonators and retarders; |
|||||||||
| - |
ÖNORM EN 13857-1: 2003 09 01-Norm: Explosives for civil purposes-Part 1: Terminology; |
|||||||||
| - |
ÖNORM EN 13857-3: 2003 02 01-Norm: Explosives for civil purposes-Part 3: Information to be made available to the user by the manufacturer or his authorised representative; |
|||||||||
| - |
ÖNORM EN 13938-1: 2005 01 01-Norm: Explosives for civil purposes-propellant powder and rocket fuel-Part 1: Requirements; |
|||||||||
| - |
ÖNORM EN 13938-2: 2005 01 01-Norm: Explosives for civil use-propellant powder and rocket fuel-Part 2: Determination of the resistance to electrostatic energy; |
|||||||||
| - |
ÖNORM EN 13938-3: 2003 06 01-Norm: Explosives for civil purposes-propellant powder and rocket fuel-Part 3: Determination of the transfer of the deflagration into detonation; |
|||||||||
| - |
ÖNORM EN 13938-4: 2004 02 01-Norm: Explosives for civil use-propellant powder and rocket fuel-Part 4: Determination of the speed of combustion in ambient conditions; |
|||||||||
| - |
ÖNORM EN 13938-5: 2004 11 01-Norm: Explosives for civil purposes-propellant powder and rocket fuel-Part 5: Solid rocket fuels-Guide to the determination of Lunkers and Rissen; |
|||||||||
| - |
ÖNORM EN 13938-6: 2004 07 01-Norm: Explosives for civil purposes-propellant powder and rocket fuel-Part 6: Solid rocket propellants-Guide to the determination of the integrity of inhibitor coatings; |
|||||||||
| - |
ÖNORM EN 13938-7: 2004 11 01-Norm: Explosives for civil use-propellant powder and rocket fuel-Part 7: Determination of the properties of black powder and |
|||||||||
| - |
ÖNORM CEN/TS 13763-27: 2003 10 01-Pre-standard: Explosives for civil purposes-igniters and delay elements-Part 27: Definitions, procedures and requirements for electronic ignition systems. |
|||||||||
Mitterlehner
