§ § 23 (1) and (3) and 65 (1) of the Waste Management Act 2002 (AWG 2002), Federal Law Gazette (BGBl). I n ° 102, as last amended by the Federal Law BGBl. I n ° 9/2011, by the Federal Minister for Agriculture, Forestry, the Environment and Water Management in agreement with the Federal Minister for Economic Affairs, Family and Youth with regard to Sections 1 to 7, 9 (1) and 10 (1) and (10) and

§ § 4 and 5 of the AWG 2002 will be issued by the Federal Minister for Agriculture, Forestry, Environment and Water Management

ensuring a recycling of suitable waste wood in the wood-based materials industry for man and the environment;

ensuring that the use of the altholze does not involve a higher environmental risk than a comparable primary raw material or a comparable product of primary raw materials;

to avoid the enrichment of pollutants in the product cycle;

the promotion of the source sorting, the preparation and recycling of suitable waste wood in the wood-based materials industry according to the hierarchy in § 1 para. 2 AWG 2002.

Owners of plants for the production of wood-based materials,

Waste producers and collectors with regard to § § 4, 6, 7 and 8, Annex 1 , Annex 2 Chapter 2 and Annex 3 and

Qualified specialists and specialist institutions with regard to § § 7 and 8, Annex 2 Chapter 2 and Annex 3 .

Waste wood: wood, which is considered as waste in accordance with § 2 AWG 2002;

Preparation: the treatment of waste wood before recycling in the wood-based material industry, such as the classification, sorting, iron (Fe) and non-ferrous metal deposition;

Qualified specialists or specialist institutions: such persons according to § 2 paragraph 6 Z 6 AWG 2002;

Assessment Value: Value to check compliance with the limit values. The calculation of the assessment value for waste wood to be recycled in the wood-based material industry shall be carried out in accordance with Annex 2 Chapter 1.2;

Declaration: the assignment of a recycling wood documented in the records to a intended use as a product on the basis of a valid proof of assessment, which is the responsibility of the Federal Minister for Agriculture, Forestry, Environment and water management;

Field sample: a sample from which the laboratory sample is prepared for the subsequent investigation;

Wood-based materials: materials produced by crushing wood, recycled wood and/or recycled wood products and subsequent assembly of the structural elements (e.g. chipboard, plates of long, flat, aligned chips (OSB), Fibre boards, composite panels, wood-plastic composite materials (WPC));

Wood-based materials industry: enterprises which have one or more of the Annex 1 use waste to produce wood-based materials;

Packaging: the treatment of waste wood to improve the physical properties, such as crushing, drying, which is required for recycling in the wood-based materials industry;

Laboratory sample: a sample prepared from the field sample after preparation, rejuvenation and, if necessary, preservation, and used for laboratory testing;

Los: those referred to in Annex 2 Chapter 2 or Annex 3 Chapter 2 of a waste whose characteristics are to be determined (a subset of the waste assessment);

Test quantity: the mass or the volume of material used in the material, the material or the material either the laboratory sample or the test sample has been taken and is necessary for the determination of the composition or other properties of interest;

Test sample: a laboratory sample after a suitable pre-treatment carried out by the laboratory (e.g. grinding to achieve sufficient homogeneity and fineness, drying);

qualified sample: a sample consisting of several samples, which can be assigned to a lot;

Recycled wood: Altholz, which is to be recycled in the wood-based materials industry, and the specifications according to Annex 1 and 2 met;

Percentage of recycled wood: the share of recycled wood in the total wood input required for the production of wood-based materials, with the exception of thermal recovery, in relation to the mass after drying;

Recycled wood product: recycled wood, which according to the requirements of Annex 3 , and for which the end of the waste property has been declared on the basis of the transmission of a valid proof of assessment to the Federal Minister for Agriculture, Forestry, the Environment and Water Management;

Rehearsals: an aliquot of the field sample, which shall be retained for any check-ups;

Sample: a sample that is drawn at a given location at a particular point in time. A sample is not individually examined, but is combined with other samples into a qualified sample;

intended customers:

persons who are likely to take over a recycled wood product, including their own use, by the person who wishes to end the waste property or who has declared the end of the waste property;

Persons who have taken over from the person who declared the end of the waste property a recycled wood product, including an own-use application.

a valid proof of assessment is already available for each individual waste; or

the waste has been shown to be treated as a source of pollutant decontamination with regard to the parameters in respect of which the input limit values have been exceeded or where the reason for the justification is that There is a suspicion of such an exceedation, so that the limits are not complied with by mixing.

a visual check in which the conformity of the delivered waste with the waste information or, where available, must be determined with the assessment certificate;

a review of the relevant documents, in particular the waste information or, where available, the proof of assessment; and

a pursuant to Annex 2 The identity check to be carried out under Chapter 2.8, unless the proof of assessment is drawn up by the holder of the plant for the production of wood-based materials. If the identity of the waste is not given, the plant owner must reject the waste shipment and transmit the results of the identity check to the waste owner.

the unique identifier;

the undertaking which produces the waste information;

the owner of the waste, if he is not ident with the company;

Date of delivery;

basic information about the waste:

Waste type according to a regulation according to § 4 AWG 2002 and in the case of shipments in addition according to Appendix 2 of the Waste Directory Ordinance, BGBl. II No 570/2003, as amended; the type of waste must be determined in accordance with the allocation criteria of the Waste Waste Collection Regulation;

Origin in accordance with the Regulation on Waste Balance Sheet (Waste Balance Sheet), BGBl. II No 497/2008, as amended

Description of the waste (in particular smell, colour);

in the case of a one-off waste, the total quantity of waste in tonnes, in the case of a waste stream, the estimated annual quantity of waste in tonnes;

the description of the origin of the waste and any treatment steps; the description of the input materials of the process in which the waste is produced and the output materials of the treatment; and an indication of any contamination and any contamination; and whose cause.

the basic procedure for the entry control,

the results of the entry control, in particular the results of the identity checks carried out in accordance with Annex 2 Chapter 2.8,

misdeclarations, indicating the waste information or where there is a proof of assessment, the waste concerned and the waste shipment, and

the results of the checks carried out in the context of the external audit, Annex 2 Chapter 2.9.

the nature and quantity of the recycled wood product,

changes in the intended customers which have emerged during the previous year, or which are likely to arise in the current reporting year, and

the results of the checks carried out in the context of the external audit, Annex 3 Chapter 2.8.

the valid proof of assessment, including the unique identifier and

Data for the intended use in accordance with Annex 3 Chapter 1.4.