201 KAR 14:110.

School equipment; plant layout.

 

      RELATES TO: KRS

317.410, 317.440

      STATUTORY

AUTHORITY: KRS 317.430, 317.440

      NECESSITY,

FUNCTION, AND CONFORMITY: Barber school equipment and plant layout

requirements.

 

      Section 1. Each

barber school must send the board a certificate from the zoning commission and

a certificate from a licensed electrician or electrical firm showing the

electrical equipment to be properly installed, properly grounded, and in safe

operating condition.

 

      Section 2.

Barber schools must be completely equipped with standard tonics, dyes, tints,

bleaches, shampoos, cosmetics, permanents, etc., all electrical devices and

other equipment for the proper instruction of students, as well as with

equipment and supplies for sanitation and hygiene.

 

      Section 3.

Barber schools must be so located as to be entirely separated and have no

connection with any beauty or barber shop or any other place of business.

 

      Section 4. No

barber school will be approved by this board having a space less than six (6)

feet square for each student enrolled therein.

 

      Section 5. All

accredited barber schools shall have a suitable and separate room to be used

for demonstration and study, said room to have necessary charts and equipment

to carry out the curriculum. The following equipment is required for this room:

      (1) Sufficient

charts, blackboards, etc., to teach all subjects of barbering.

      (2) Sufficient

classroom chairs with armrests, or desks, that will enable the student to take

notes.

 

      Section 6. Every

barber school is required to maintain a separate lavatory and toilet for male

and female students.

 

      Section 7. All

barber schools must comply with city and state building codes and zoning

commission codes.

 

      Section 8.

Lockers, dressing rooms and restrooms must be provided.

 

      Section 9.

Booths and partitions in the work department shall be sufficiently low to

permit the observation of students while they are working.

 

      Section 10. No

school of barbering will be approved by the board having less than the following

equipment: shampoo bowls; dryers; manicure tables; (a liquid sterilizer is

required on each manicure table) hair cutting chair; wall plates; covered waste

containers; individual paper towels; and containers for the use of students.

 

      Section 11. (1)

Each barbering school is required to furnish a supply or dispensing room in

which each student may obtain actual experience for a period of one (1) to

three (3) weeks, as indicated by the course of instruction. The student will be

directly responsible to the owner for any damage incurred due to the student's

negligence or willful destruction while working in the supply or dispensing

room.

      (2) Supply or

dispensing and sterilization room equipment required for a barbering school:

      (a) Supply of

clean linens, neck cloths, etc.

      (b) Lavatory for

washing all combs, instruments, containers, etc.

      (c) Bottles and

containers in use must be distinctly and correctly labeled.

      (d) Wet

sterilizer.

      (e) Dry

sterilizer.

      (f) Manicuring

sterilizer.

      (g) Soap

dispenser.

      (h) Covered

waste container.

      (i) Cabinet for

supply of clean linens.

      (j) Covered

containers for soiled linens.

      (k) Cabinets for

accessories.

      (l) Individual

paper towel container.

      (m) Manicuring

cups for preparation of solution from stock supplies.

      (n) Various

solutions and preparations used. (KBB:Sch:Eqmt-1; 1 Ky.R. 728; eff. 5-14-75;

Am. 10 Ky.R. 899; eff. 2-1-84.)