804 KAR 11:010. Equipment and
supplies.
RELATES TO: KRS 244.500, 244.590
STATUTORY AUTHORITY: KRS 241.060(1),
244.590(1)(c)
NECESSITY, FUNCTION, AND CONFORMITY:
KRS 241.060(1) authorizes the Alcoholic Beverage Control Board to promulgate
administrative regulations governing procedures relative to the supervision and
control of the use, manufacture, sale, advertising, and trafficking of
alcoholic beverages. KRS 244.590(1)(c) authorizes the administrator of the malt
beverage unit to prescribe by administrative regulation the types of equipment
or other things of value a brewer or distributor may furnish to a malt beverage
retailer. This administrative regulation establishes the items that a brewer or
distributor may furnish to a retail licensee and other licensees.
Section 1. (1) A brewer or
distributor may furnish the following equipment to retail licensees that sell
draft malt beverages:
(a) Tapping accessories;
(b) Rods;
(c) Vents:
(d) Taps;
(e) Hoses;
(f) Washers;
(g) Couplings;
(h) Vent tongues;
(i) Check valves; and
(j) Tap knobs.
(2) If tap knobs, or similar devices,
bearing brand names are furnished they shall not be used to dispense malt
beverages of a different brand from that designated on the knob. Other
equipment shall not be furnished to retail malt beverage licensees.
Section 2. A brewer or distributor
may furnish vats, tubs, tanks, or portable dispensing units to special
temporary licensees, picnics, bazaars and carnivals. The equipment may bear a
trade name, trademark, trade slogan or a facsimile of a product, container or
display, associated with a particular brand that is visible to the consumer. (ABC
12:10; 1 Ky.R. 847; eff. 5-14-75; Am. 9 Ky.R. 381; eff. 10-6-82; 31 Ky.R. 628;
940; eff. 11-26-04.)