Title 73 - Water and Irrigation - Chapter 18 - State Boating Act - Section 8.1 - Capacity and certification label.


Published: 2016-05-10

Subscribe to a Global-Regulation Premium Membership Today!

Key Benefits:

Subscribe Now for only USD$40 per month.

Utah Code

Page 1

Effective 5/10/2016 73-18-8.1 Capacity and certification label. (1) Each vessel manufactured after November 1, 1972, which is less than 20 feet in length, except

a sailboat, canoe, kayak, inflatable vessel, or homemade motor boat must have a United States Coast Guard capacity and certification label permanently affixed to the vessel and clearly visible to the operator when boarding or operating the vessel. The capacity and certification information may be combined together and displayed on one label.

(2) No person shall operate, or give permission for the operation of, any vessel on the waters of this state if it is loaded or powered in excess of the maximum capacity information on the United States Coast Guard capacity label.

(3) No person shall alter, deface, or remove any United States Coast Guard capacity or certification information label affixed to a vessel.

(4) No person shall operate, or give permission for the operation of, a vessel on the waters of this state if the required United States Coast Guard capacity or certification information label has been altered, defaced, or removed.

(5) A violation of this section is an infraction.

Amended by Chapter 303, 2016 General Session