Advanced Search

WAC 296-874-300: Suspended Scaffolds


Published: 2015

Subscribe to a Global-Regulation Premium Membership Today!

Key Benefits:

Subscribe Now for only USD$40 per month.
Print







WACs > Title 296 > Chapter 296-874 > Section 296-874-300











296-874-20076    

296-874-30002







Agency filings affecting this section







WAC 296-874-300









Suspended scaffolds.









Summary Your responsibility: To meet these requirements when using suspended scaffolds.

You must meet the requirements … in this section:

Make sure suspended scaffolds and scaffold components meet these strength requirements WAC 296-874-30002


Make sure suspended scaffold outrigger beams meet these requirements WAC 296-874-30004


Make sure counterweights are safe and used properly WAC 296-874-30006


Make sure tiebacks meet these requirements WAC 296-874-30008


Make sure suspended scaffold support devices meet these requirements WAC 296-874-30010


Make sure scaffold hoists meet these requirements WAC 296-874-30012


Make sure scaffold hoists retain enough suspension rope WAC 296-874-30014


Make sure wire rope is in good condition WAC 296-874-30016


Make sure wire suspension rope connections meet these requirements WAC 296-874-30018


Make sure wire rope clips are used properly WAC 296-874-30020


Prevent swaying of two-point and multipoint suspension scaffolds WAC 296-874-30022


Use emergency escape and rescue devices appropriately WAC 296-874-30024


Protect suspension ropes from heat or corrosive substances WAC 296-874-30026


Take precautions while welding WAC 296-874-30028


Prohibit use of gasoline-powered equipment on suspended scaffolds WAC 296-874-30030


Meet these requirements when using catenary scaffolds WAC 296-874-30032


Meet these requirements when using float (ship) scaffolds WAC 296-874-30034


Meet these requirements when using interior hung scaffolds WAC 296-874-30036


Meet these requirements when using multilevel suspended scaffolds WAC 296-874-30038


Meet these requirements when using multipoint adjustable suspension scaffolds WAC 296-874-30040


Meet these requirements when using needle beam scaffolds WAC 296-874-30042


Meet these requirements when using single-point adjustable suspension scaffolds WAC 296-874-30044


Meet these requirements when using two-point adjustable suspension scaffolds (swing stages) WAC 296-874-30046


[Statutory Authority: RCW 49.17.010, 49.17.040, 49.17.050. WSR 15-23-086, § 296-874-300, filed 11/17/15, effective 12/18/15. Statutory Authority: RCW 49.17.010, 49.17.040, 49.17.050, 49.17.060. WSR 05-01-054, § 296-874-300, filed 12/7/04, effective 3/1/05.]