Exportation of Arms and Warlike Stores Act

Subscribe to a Global-Regulation Premium Membership Today!

Key Benefits:

Subscribe Now for only USD$20 per month, or Get a Day Pass for only USD$4.99.
Exportation of Arms and Warlike Stores Act
CHAPTER 10.14
EXPORTATION OF ARMS AND WARLIKE STORES ACT
ARRANGEMENT OF SECTIONS

SECTION
1. Short title
2. Prohibition of exportation generally of warlike stores
3. Prohibition of exportation of warlike stores in particular cases
4. Penalty
____________

CHAPTER 10.14
EXPORTATION OF ARMS AND WARLIKE STORES ACT
(Acts 3 of 1901, 17 of 1922, 9 of 2011 and S.R.O. 15/1956)
Commencement
[23 March 1901]
Short title
1. This Act may be cited as the Exportation of Arms and Warlike Stores Act.
Prohibition of exportation generally of warlike stores
2. The Governor may by proclamation or by Order in Cabinet prohibit or restrict in any way he may specify in such proclamation or Order in Cabinet the exportation from Montserrat either generally or to any country or place or the carrying coastwise of the following goods, that is to say, arms, ammunition and gunpowder and military and naval stores and any articles which the Governor shall judge capable of being converted into or made useful in increasing the quantity of military or naval stores, provisions or any sort of victual which may be used as food for man. (Amended by Act 9 of 2011)


Prohibition of exportation of warlike stores in particular cases
3. The Governor may by proclamation or Order in Cabinet prohibit the exportation from Montserrat of all or any of the following articles, namely, arms, ammunition, military and naval stores and any article which the Governor shall judge capable of being converted into or made useful in increasing the quantity of arms, ammunition or military or naval stores to any country or place therein named whenever the Governor shall judge such prohibition to be expedient in order to prevent such arms, ammunition, military or naval stores being used against Her Majesty’s subjects or forces or against any forces engaged or which may be engaged in military or naval operations in co-operation with Her Majesty’s forces. (Amended by Act 9 of 2011)
Penalty
4. If any goods, the exportation or carrying coastwise whereof, as the case may be, shall have been prohibited under the authority of this Act, shall be exported or brought to any quay, wharf, pier or other place to be shipped for exportation from Montserrat or carried coastwise, as the case may be, or be waterborne to be so exported or carried, they shall be forfeited and the exporter or his agent or the shipper of any such goods shall be liable to a penalty of $480 and such penalty may be recovered on complaint in a summary manner before the Magistrate in accordance with the provisions of the Magistrate’s Court Act.
___________

EXPORTATION OF ARMS AND WARLIKE STORES (RESTRICTION) ORDER — SECTION 3
(S.R.O.s 33/1999 and 38/2000 and Act 9 of 2011)
Commencement
[14 June 1999]
Short title
1. This Order may be cited as the Exportation of Arms and Warlike Stores
(Restriction) Order.
Interpretation
2. In this Order—
“basic scientific research” means experimental or theoretical work undertaken
principally to acquire new knowledge of the fundamental principles of
phenomena or observable facts, not primarily directed towards a specific
practical aim or objective;
“development” is related to all stages prior to serial production, such as design,
design research, design analyses, design concepts, assembly and testing of
prototypes, pilot production schemes, design data, process of transforming
design data into a product, configuration design, integration design, layouts;
“production” means all production stages, such as product engineering, manufacture,
integration, assembly (mounting), inspection, testing, quality assurance;
“required” as applied to “technology”, refers to only that portion of “technology”
which is peculiarly responsible for achieving or exceeding the controlled
performance levels, characteristics of functions. Such “required”
“technology” may be shared by different “goods”;
“technology” means specific information necessary for the development, production
or use of a product. The information may take forms such as blueprints, plans,
diagrams, models, formulae, tables, engineering designs and specifications,
manuals and instructions written or recorded on other media or devices such as
disk, tape, read-only memories;
“use” means operation, installation (which includes on-site installation), maintenance,
checking, repair, overhaul and refurbishing.
Prohibitions on exportation
3. (1) Subject to the provisions of this Order, the goods described in Schedule 1
are hereby prohibited from exportation to the Countries specified in Schedule 2.
(2) Subject to the provisions of this Order, the export of technology specified in Schedule 1 is prohibited if it is capable of being required for the development,
production or use of goods specified in that Schedule, whether or not the technology
being exported in the particular case is intended to be applied in respect of such goods.
(3) The prohibition in paragraph (2) does not apply—

(a) to technology which is the minimum necessary for the installation, operation, maintenance and repair of goods not
specified in Schedule 1;
(b) to technology in the public domain;
(c) to basic scientific research;
(d) to the minimum necessary information for patent applications.
Exceptions
4. Nothing in this Order shall be taken to prohibit the exportation of—
(a) any aircraft which is being exported after temporary importation
into Montserrat provided that, there has been no change of
ownership or registration since such importation;
(b) any aircraft on a scheduled journey;
(c) any aircraft immediately preceding importation of which was on a scheduled journey and which is intended for further scheduled
journeys;
(d) any vessel registered or constructed outside Montserrat which is being exported (except to a destination in Iran, Iraq or Libya or to
a country specified in Schedule 2 hereto) after temporary
importation into Montserrat;
(e) any vessel which is departing from Montserrat on trials;
(f) any vessel proceeding on a normal commercial journey;
(g) any firearm authorised to be possessed or, as the case maybe, purchased or acquired pursuant to a valid certificate granted
under the Firearms Act or any other law:
Provided that, the firearm forms part of the personal effects
of the holder of the certificate.
(h) permitted ships' stores or the shipment of any goods as ships' stores with the permission of the Comptroller of Customs at the
port of departure for use on board the ship:
Provided that, all conditions attached to the said permission
are complied with.
(i) any goods under the authority of a licence in writing granted by the Governor acting on the advice of Cabinet, provided that, all
conditions attaching to the licence are complied with. (Amended by S.R.O. 38 of 2000 and Act 9 of 2011)
___________

SCHEDULE 1
(Regulation 3)
In this Schedule—
“Active tooling unit” means a device for applying motive power, process energy or
sensing to the workpiece;
“adapted for use in war” means any modification or selection (such as altering
purity, shelf life, virulence, dissemination characteristics, or resistance to ultra
violet (UV) radiation) designed to increase the effectiveness in producing
casualties in humans or animals, degrading equipment or damaging crops or
the environment;
“additives” means substances used in explosive formulations to improve their
properties;
“anti-idiotypic antibodies” means antibodies which bind to the specific antigen
binding sites of other antibodies;
“biocatalyst” means enzymes and other biological compounds which bind to and
accelerate the degradation of chemical warfare (CW) agents;
“biopolymer” means the following biological macromolecules—
(a) “enzymes”;
(b) antibodies, monoclonal, polyclonal or “anti-idiotypic”;
(c) specially designed or specially processed “receptors”;
“critical temperature” (sometimes referred to as the transition temperature) of a
specific superconductive material means the temperature at which the specific
material loses all resistance to the flow of direct electrical current;
“end-effectors” include grippers, active tooling units and any other tooling that is
attached to the baseplate on the end of a “robot” manipulator arm;
“enzymes” means “biocatalysts” for specific chemical or biochemical reactions;
“expression vectors” means carriers (e.g., plasmid or virus) used to introduce genetic
material into host cells;
“first generation image intensifier tubes” means electrostatically focused tubes,
employing input and output fibre optic or glass face plates, multi-alkali
photocathodes (S-20 or S-25), but not microchannel plate amplifiers;
“improvised explosive devices” means devices fabricated or intended to be placed in
an improvised manner incorporating destructive, lethal, noxious, pyrotechnic
or incendiary chemicals, designed to destroy, disfigure or harass; they may
incorporate military stores, but are normally devised from non-military
components;
“laser” means an assembly or components which produce both spatially and
temporally coherent light which is amplified by stimulated emission of
radiation;

“microprogramme” means a sequence of elementary instructions, maintained in a
special storage, the execution of which is initiated by the introduction of a
reference instruction into an instruction register;
“military explosives” means solid, liquid or gaseous substances or mixtures of
substances which, in their application as primary, booster, or main charges in
warheads, demolition and other military applications, are required to detonate;
“military pyrotechnics” means mixtures of solid or liquid fuels and oxidisers which,
when ignited, undergo an energetic chemical reaction at a controlled rate
intended to produce specific time delays, or quantities of heat, noise, smoke,
visible light or infrared radiation, pyrophorics are a subclass of pyrotechnics,
which contain no oxidisers but ignite spontaneously or contact with air;
“monoclonal antibodies” means proteins which bind to one antigenic site and are
produced by a single clone of cells;
“nuclear reactor” means the items within or attached directly to the reactor vessel, the
equipment which controls the level of power in the core, and the components
which normally contain, come into direct contact with or control the primary
coolant of the reactor core;
“polyclonal antibodies” means a mixture of proteins which bind to the specific antigen
and are produced by more than one clone of cells;
“programme” means a sequence of instructions to carry out a process in, or convertible
into, a form executable by an electronic computer;
“receptors” means biological macromolecular structure capable of binding ligands, the
binding of which affects physiological functions;
“required” as applied to “technology”, refers to only that portion of “technology”
which is peculiarly responsible for achieving or exceeding the controlled
performance levels, characteristics of functions. Such “required” “technology”
may be shared by different “goods”;
“riot control agents” means substances which produce temporary, irritating or
disabling physical effects which disappear within minutes of removal from
exposure. There is no significant risk of permanent injury and medical
treatment is rarely required;
“robot” means a manipulation mechanism, which may be of the continuous path or of
the point-to-point variety, may use sensors, and which—
a. Is multifunctional;
b. Is capable of positioning or orienting material, parts, tools or special
devices through variable movements in three dimensional space;
c. Incorporates three or more closed or open loop servo-devices which
may include stepping motors; and
d. Has “user-accessible programmability” by means of the
teach/playback method or by means of an electronic computer which
may be a programmable logic controller, i.e., without mechanical
intervention;

except:
a. Manipulation mechanisms which are only manually/teleoperator
controllable;
b. Fixed sequence manipulation mechanisms, which are automated
moving devices, operating according to programmes where the
motions are limited by fixed stops, such as pins or cams and the
sequence of motions and the selection of paths or angles are not
variable or changeable by mechanical, electronic or electrical means;
c. Mechanically controlled variable sequence manipulation mechanisms,
which are automated moving devices, operating according to
programmes where the motions are limited by fixed, but adjustable
stops, such as pins or cams and the sequence of motions and the
selection of paths or angles are variable within the fixed programme
pattern; variations or modifications of the programme pattern (e.g.,
changes of pins or exchanges of cams) in one or more motion axes are
accomplished only through mechanical operations;
d. Non-servo-controlled variable sequence manipulation mechanisms,
which are automated moving devices, operating according to
mechanically fixed programmed motions; the programme is variable
but the sequence proceeds only by the binary signal from
mechanically fixed electrical binary devices or adjustable stops;
e. Stacker cranes defined as Cartesian coordinate manipulator systems
manufactured as an integral part of a vertical array of storage bins and
designed to access the contents of those bins for storage or retrieval;
“software” means one or more “programmes” or “microprogrammes” fixed in any
tangible medium of expression;
“special gun-mounting” means any fixture designed to mount a gun;
“superconductive” in relation to materials (i.e., metals, alloys or compounds), means
those which can lose all electrical resistance (i.e., which can attain infinite
electrical conductivity and carry very large electrical currents without Joule
heating); the superconductive state of a material is individually characterized
by a “critical temperature”, a critical magnetic field, which is a function of
temperature, and a critical current density which is a function of both magnetic
field and temperature;
“tear gases” means gases which produce temporary irritating or disabling effects
which disappear within minutes of removal of exposure;
“user-accessible programmability” means the facility allowing a user to insert,
modify or replace “programmes” by means other than—
a. A physical change in wiring or interconnections; or
b. The setting of function controls including entry of parameters.
The goods listed below are for convenience classified in accordance with the
classification system used by the United Kingdom's Department of Trade and Industry
for export purposes.

Goods prohibited from Export
ML1 Arms and automatic weapons with a calibre of 12.7mm (calibre 0.50 inches) or
less and accessories, as follows and specially designed components therefor:
a. Rifles, carbines, revolvers, pistols, machine pistols and machine guns;
b. Smooth-bore weapons specially designed for military use;
c. Weapons using caseless ammunition;
d. Silencers, “special gun-mountings”, clips and flash suppressers for
arms specified in entry ML1.a., ML1.b. or ML1.c;
except:
a. Air weapons (other than those declared by the Firearms (Dangerous
Air Weapons) Rules 1969 (UK) to be specially dangerous);
b. Firearms specially designed for dummy ammunition and which are
incapable of firing any ammunition specified in this Part of this
Schedule;
c. Weapons using non-centre fire cased ammunition and which are not
of the fully automatic firing type;
d. Firearms which have been de-activated by a registered UK Proof
House as being incapable of firing any ammunition specified in this
Part of this Schedule;
e. Bayonets.
Technical Note:
Smooth-bore weapons specially designed for military use as specified in entry ML1.b.
are those which:
a. Are proof tested at pressures above 1,300 bars;
b. Operate normally and safely at pressures above 1,000 bars; and
c. Are capable of accepting ammunition above 76.2mm in length (eg.
commercial 12-gauge magnum shot gun shells).
PL5002 Telescopic sights for goods specified in entry ML1 and PL5018,
other than those specified in entry ML5.b.
PL5018 Smooth-bore weapons, other than those specified in entry ML1.b.
and ML2, and specially designed components therefor;

except:
a. Air weapons (other than those declared by the Firearms (Dangerous
Air Weapons) Rules 1969 to be specially dangerous);
b. Air (pneumatic) or cartridge (explosive) powered guns or pistols
designed as:
1. Industrial tools; or
2. Humane stunning devices employed specifically for animal
slaughter;
c. Signal pistols.
PL5021 Ammunition or cartridges, including projectiles, and specially
designed components therefor, for the “goods” specified in entry PL5018;
except:
a. Lead or lead alloy pellet ammunition specially designed for air
weapons;
b. Ammunition crimped without a projectile (blank star) and dummy
ammunition with a pierced powder chamber.
ML2 Armament or weapons with a calibre greater than 12.7mm (calibre 0.50
inches), projectors and accessories, as follows, and specially designed components
therefor;
a. Guns, howitzers, cannon, mortars, anti-tank weapons, projectile
launchers, military flame throwers, recoilless rifles and signature
reduction devices therefor;
b. Military smoke, gas and pyrotechnic projectors or generators.
except:
Signal pistols.
ML3 Ammunition, and specially designed components therefor, for the weapons
specified in entry ML1, ML2 or ML12;
except:
a. Ammunition crimped without a projectile (blank star) and dummy
ammunition with a pierced powder chamber;
b. Lead or lead alloy pellet ammunition specially designed for air
weapons.
ML4 Bombs, torpedoes, rockets, missiles, and related equipment and accessories, as
follows, specially designed for military use, and specially designed components
therefor:
a. Bombs, torpedoes, grenades, smoke canisters, rockets, mines,
missiles, depth charges, demolition-charges, demolition-devices and
demolition-kits, “military pyrotechnics”, cartridges and simulators (ie.
equipment simulating the characteristics of any of these items):

b. Equipment specially designed for the handling, control, activation,
powering with one-time operational output, launching, laying,
sweeping, discharging, decoying, jamming, detonation or detection of
items specified in entry ML4.a.
PL5006 Apparatus or devices specially designed for military use, used for the
handling, control, discharging, decoying, jamming, detonation, disruption or detection
of improvised explosive devices or other explosive devices not specified in entry
ML4.a., and specially designed components therefor;
except:
Inspection devices not employing electronic management.
PL5030 Bombs and grenades, other than those specified in entry ML4 and
specially designed components therefor.
ML5 Fire control, and related alerting and warning equipment, and related systems
and countermeasure equipment, as follows, specially designed for military use, and
specially designed components and accessories therefor:
a. Weapon sights, bombing computers, gun laying equipment and
weapon control systems;
b. Target acquisition, designation, range-finding, surveillance or tracking
systems; detection, data fusion, recognition or identification
equipment; and sensor integration equipment;
c. Countermeasure equipment for items specified in entry ML5.a. and
ML5.b.
ML6 Ground vehicles and components therefor specially designed or modified for
military use.
Technical Note:
For the purposes of entry ML6 the term ground vehicles includes trailers.
Note: Modification of a ground vehicle for military use entails a structural,
electrical or mechanical change involving one or more specially designed military
components.
PL5031 Ground vehicles and related equipment, other than those specified
elsewhere in this part of this Schedule, as follows:
a. All wheel drive utility vehicles capable of off road use which have
been manufactured or fitted with metallic or non-metallic materials to
provide ballistic protection;
b. Containers for mounting on vehicles, specially designed or modified
for military use and components therefor specially designed or
modified for military use.
ML7 In this entry, references in square brackets to Chemical Abstract Service
(“CAS”) numbers are included for convenience only. Goods of which the description
in this entry includes a CAS reference are specified in this entry whether or not they
fall within that reference.

Toxicological agents, toxic chemicals, “tear gases”, related equipment, components,
materials and “technology” as follows:
a. Toxicological agents and toxic chemicals, as follows:
1. Biological agents and radioactive materials “adapted for use in
war” to produce casualties in humans or animals, degrade
equipment or damage crops or the environment and chemical
warfare (“CW”) agents;
2. The chemicals listed in items (1) to (6) of the Schedule to the
Chemical Weapons Act 1996 (UK), read with notes 2 and 3 of
that Schedule, whether or not they are CW agents within entry
ML7;
3. 3-Quinuclidinyl benzilate (BZ) [CAS 6581-06-02];
b. CW binary precursors and key precursors, as follows:
1. Alkyl (Methyl, Ethyl, n-Propyl or Isopropyl Phosphonyl
Difluorides, such as: DF: Methyl Phosphonyldifluoride
[CAS 676-99-3];
2. O-Alkyl (H or equal to or less than C10, including cycloalkyl)
0-2-dialkyl (Methyl, Ethyl, n-Propyl or Isopropyl) aminoethyl
alkyl (Methyl, Ethyl, n-Propyl or Isopropyl) phosphonite and
corresponding alkylated and protonated salts, such as:
QL: O-Ethyl-2-di-isopropylaminoethyl methylphosphonite [CAS 57856-11-8];
3. Chlorosarin: O-Isopropyl methylphosphonochloridate
[CAS 1445-76-7];
4. Chlorosoman: O-Pinakolyl methylphosphonochloridate
[CAS 7040-57-5];
c. “Tear gases” and “riot control agents” including:
1. Bromobenzyl cyanide (CA)[CAS 5798-79-8]:
2. o-Chlorobenzylidenemalononitrile (o-Chlorobenzalmalononitrile)
(CS)[CAS 2698-41-1]:
3. Phenylacylchloride (w-chloroacetophenone)(CN)
[CAS 532-27-4]:
4. Dibenz-(b.f)-1, 4-oxazephine(CR)[CAS 257-07-8]:
except:
Tear gases or riot control agents individually packaged for personal self defence
purposes.
d. Equipment specially designed or modified for the dissemination of the materials or agents specified in entry ML7.a. and specially designed
components therefor:

Note: Entry ML7.d. does not include equipment not specially
designed or modified for military purposes.
e. “Goods” specially designed for defence against materials specified in
entry ML7a. and specially designed components therefor:
Note: Entry ML7.e. does not include “goods” not specially
designed or modified for military purposes.
f. “Goods” specially designed for the detection or identification of
materials specified in ML7.a. and specially designed components
therefor:
except:
Personal radiation monitoring dosimeters
Note: Entry ML7.f. does not include “goods” not specially designed or modified for
military purposes.
g. “Biopolymers” specially designed or processed for the detection or
identification of CW agents specified in entry ML7.a. and the cultures
of specific cells used to produce them;
h. “Biocatalysts” for the decontamination or degradation of CW agents
and biological systems therefor, as follows:
1. “Biocatalysts” specially designed for the decontamination or
degradation of CW agents specified in entry ML7.a. resulting
from directed laboratory selection or genetic manipulation of
biological systems;
2. Biological systems, as follows: “expression vectors”, viruses or
cultures of cells containing the genetic information specific to the
production of “biocatalysts” specified in entry ML7.h.1.;
i. “Technology” as follows:
1. “Technology” for the “development”, “production” or “use” of
toxicological agents, related equipment or components specified
in entry ML7.a. to ML7.f.;
2. “Technology” for the “development”, “production” or “use” of
“biopolymers” or cultures of specific cells specified in entry
ML7.g.;
3. “Technology” exclusively for the incorporation of
“biocatalysts”, specified in entry ML7.h.1., into military carriers
substances or military material.
Notes:
1. ML7.a. and ML7.c. do not include:
a. Cyanogen chloride;
b. Hydrocyanic acid;

c. Chlorine;
d. Carbonyl chloride (phosgene);
e. Diphosgene (trichloromethyl-chloroformate);
f. Ethyl bromoacetate;
g. Xylyl bromide;
h. Benzyl bromide;
i. Benzyl iodide;
j. Bromo acetone;
k. Cyanogen bromide;
l. Bromo methylethylketone;
m. Chloro acetone;
n. Ethyl iodoacetate;
o. Iodo acetone;
p. Chloropicrin.
2. The “technology”, cultures of cells and biological systems listed in entries
ML7.g., ML7.h.2. and ML7.i.3. are exclusive and do not include “technology”, cells
or biological systems for civil purposes, such as agricultural, pharmaceutical, medical,
veterinary, environmental, waste management, or in the food industry.
ML8 In this entry, references in square brackets to Chemical Abstract Service
(“CAS”) numbers are included for convenience only. Goods of which the description
in this entry includes a CAS reference are specified in this entry whether or not they
fall within that reference.
“Military explosives” and fuels, including propellants, and related substances, as
follows:
a. Substances, as follows, and mixtures thereof:
1. Spherical aluminium powder [CAS 7429-90-5] with a particle
size of 60 um or less manufactured from material with an
aluminium content of 99% or more;
2. Metal fuels in particle form whether spherical, atomized,
spheroidal, flaked or ground, manufactured from material
consisting of 99% or more of any of the following:
b. Metals and mixtures therefore:
1. Beryllium [CAS 7440-41-7] in particle sizes of less than 60 um;
2. Iron powder [CAS 7439-89-6] with particle size of 3 um or less produced by reduction of iron oxide with hydrogen;
c. Mixtures, which contain any of the following:

1. Zirconium [CAS 7440-67-7], magnesium [CAS 7439-95-4] and
alloys of these in particle sizes of less than 60 um;
2. Boron [CAS 7440-42-8] or boron carbide [CAS 12069-32-8]
fuels of 85% purity or higher and particle sizes of less than 60
um;
3. Perchlorates, chlorates and chromates composited with powdered
metal or other high energy fuel components;
4. Nitroguanidine (NQ)[CAS 556-88-7];
5. Compounds composed of fluorine and any of the following: other
halogens, oxygen, nitrogen;
6. Carboranes, decaborane [CAS 17702-41-9]; pentaborane and
derivatives thereof;
7. Cyclotetramethylenetetranitramine [CAS 2691-41-0] (HMX);
octahydro - 1,3,5,7 - tetranitro - 1,3,5,7 - tetrazine; 1,3,5,7 -
tetranitro - 1,3,5,7 - tetraza-cyclooctane; (octogen, octogene);
8. Hexanitrostilbene (HNS) [CAS 20062-22-0];
9. Diaminotrinitrobenzene (DATB) [CAS 1630-08-6];
10. Triaminotrinitrobenzene (TATB) [CAS 3058-38-6];
11. Triaminoguanidinenitrate (TAGN) [CAS 4000-16-2];
12. Titanium subhydride of stoichiometry TiH 0.65-1.68;
13. Dinitroglycoluril (DNGU, DINGU) [CAS 55510-04-8];
tetranitroglycoluril (TNGU, SORGUYL) [CAS 55510-03-7];
14. Tetranitrobenzotriazolobenzotriazole (TACOT) [CAS 25243-36-
1];
15. Diaminohexanitrobiphenyl (DIPAM) [CAS 17215-44-0];
16. Picrylaminodinitropyridine (PYX) [CAS 38082-89-2];
17. 3-nitro-1,2,4-triazol-5-one (NTO or ONTA) [CAS 932-64-9];
18. Hydrazine [CAS 302-01-2] in concentrations of 70% or more;
hydrazine nitrate [CAS 37836-27-4]; hydrazine perchlorate [CAS
27978-54-7]; unsymmetrical dimethyl hydrazine [CAS 57-14-7];
monomethyl [CAS 60-34-4] hydrazine; symmetrical dimethyl
hydrazine [CAS 540-73-8];
19. Ammonium perchlorate [CAS 7790-98-9];
20. Cyclotrimethylenetrinitramine (RDX) [CAS 121-82-4];
cyclonite; T4; hexahydro-1,3,5 - trinitro -1,3, 5-triazine; 1,3,5-
trinitro-1,3,5-triaza-cyclohexane (hexogen, hexogene);
21. Hydroxylammonium nitrate (HAN) [CAS 13465-08-2];
hydroxylammonium perchlorate (HAP)[CAS15588-62-2];

22. 2-(5-cyanotetrazolato) penta amine-cobalt (III) perchlorate (or
CP) [CAS 70247-32-4];
23. cis-bis (5-nitrotetrazolato) tetra amine-cobalt (III) perchlorate (or
BNCP);
24. 7-Amino-4,6-dinitrobenzofurazane-1-oxide (ADNBF) [CAS
97096-78-1]; amino dinitrobenzofuroxan;
25. 5,7-diamino-4,6-dinitrobenzofurazane-1-oxide (CAS 117907-74-
1), (CL-14 or diamino dinitrobenzofuroxan);
26. 2,4,6-trinitro-2,4,6-triazacyclohexanone (K-6 or Keto-RDX)
[CAS 115029-35-1];
27. 2,4,6,8-tetranitro-2,4,6,8-tetraazabicyclo [3,3,0]-octanone-3
[CAS 130256-72-3] (tetranitrosemiglycouril, K-55 or keto-
bicyclic HMX);
28. 1,1,3-trinitroazetidine (TNAZ) [CAS 97645-24-4];
29. 1,4,5,8-tetranitro-1,4,5,8-tetraazadecalin (TNAD) [CAS 135877-
16-6];
30. Hexanitrohexaazaisowurtzitane [CAS 135285-90-4](CL-20 or
HNIW); and chlathrates of CL-20;
31. Polynitrocubanes with more than four nitro groups;
32. Ammonium dinitramide (ADN or SR 12) [CAS 140456-78-6];
33. Trinitrophenylmethylnitramine (tetryl) [CAS 479-45-8];
d. Explosives and propellants that meet the following performance
parameters.
1. Any explosive with a detonation velocity exceeding 8,700 m/s or
a detonation pressure exceeding 34 GPa (340 kbar);
2. Other organic explosives not listed in ML8, yielding detonation
pressures of 25 GPa (250 kbar) or more that will remain stable at
temperatures of 523 K (250 0 C) or higher for periods of 5 minutes
or longer;
3. Any other United Nations (UN) Class 1.1, solid propellant not
listed in ML8, with a theoretical specific impulse (under standard
conditions) of more than 250 s for non-metallised, or more than
270 s for aluminised compositions;
4. Any UN Class 1.3 solid propellant with a theoretical specific
impulse of more than 230 s for non-halogenised, 250 s for non-
metallised and 266 s for metallised compositions;
5. Any other gun propellants not listed in ML8, having a force constant of more than 1,200 kJ/kg;
6. Any other explosives propellants or pyrotechnic not listed in
ML8, that can sustain a steady-state burning rate of more than 38

mm/s under standard conditions of 6.89 MPa (68.9 bar) pressure
and 294 K (21 0 C); or
7. Elastomer modified cast double based propellants (EMCDB)
with extensibility at maximum stress of more than 5% at 233 K
(-40 0 C);
c. “Military pyrotechnics”;
d. Other substances as follows:
1. Aircraft fuels specially formulated for military purposes;
2. Military materials containing thickeners for hydrocarbon fuels
specially formulated for use in flamethrowers or incendiary
munitions, such as metal stearates or palmates (also known as
octal) [CAS 637-12-7] and M1, M2, M3 thickeners;
3. Liquid oxidisers comprised of or containing inhibited red fuming
nitric acide (IRFNA) [CAS 8007-58-7] or oxygen difluroride;
e. “Additives” and “precursors”, as follows:
1. Azidomethylmethyloxetane (AMMO) and its polymers;
2. Basic cooper salicylate [CAS 62320-94-9]; lead salicylate
[CAS 15748-73-9];
3. Bis (2,2-dinitropropyl) formal [CAS 5917-61-3] or Bis (2,2-
dinitropropyl) acetal [CAS 5108-69-0];
4. Bis-(2-fluoro-2,2-dinitroethyl) formal (FEFO) [CAS 17003-79-
1];
5. Bis-(2-hydroxyethyl) glycolamide (BHEGA) [CAS 17409-41-5];
6. Bis (2-methyl aziridinyl) methylamino phosphine oxide (Methyl
BAPO) [CAS 85068-72-0];
7. Bisazidomethyloxetane and its polymers [CAS 17607-20-4];
8. Bischloromethyloxetane (BCMO) [CAS 142173-26-0];
9. Butadienenitrileoxide (BNO);
10. Butanetrioltrinitrate (BTTN) [CAS 6659-60-5];
11. Catocene [CAS 37206-42-1] (2,2-Bis-ethylferrocenyl propane);
ferrocene carboxylic acids; N-butyl-ferrocene [CAS 319904-29-
7]; Butacene [CAS 125856-62-4] and other adducted polymer
ferrocene derivatives;
12. Dinitroazetidine-t-butyl salt;
13. Energetic monomers, plasticisers and polymers containing nitro, azido, nitrate, nitraza or difluoroamino groups;
14. Poly-2,2,3,3,4,4-hexafluoropenatane-1,5-diol formal (FPF-1);

15. Poly-2,4,4,5,5,6,6-heptafluoro-2-tri-fluoromethyl-3-oxaheptane-
1,7-diol formal (FPF-3);
16. Glycidylazide Polymer (GAP) [CAS 143178-24-9] and its
derivatives;
17. Hexabenzylhexaazaisowurtzitane (HBIW) [CAS 124782-15-6];
18. Hydroxyl terminated polybutadiene (HTPB) with a hydroxyl
functionality equal to or greater than 2.2 and less than or equal to
2.4, a hydroxyl value of less than 0.77 meq/g, and a viscosity at
30 0 C of less than 47 poise [CAS 69102-90-5];
19. Superfine iron oxide (Fe203 hematite) with a specific surface area
more than 250 m 2 /g and an average particle size of 0.003 um or
less[CAS 1309-37-1-];
20. Lead beta-resorcylate [CAS 20936-32-7];
21. Lead stannate [CAS 12036-31-6], lead maleate [CAS 19136-34-
6], lead citrate [CAS 14450-60-3];
22. Lead-copper chelates of beta-resorcylate or salicylates [CAS
68411-07-4];
23. Nitratomethylmethyloxetane or poly (3-Nitratomethyl, 3-methyl
oxetane); (Poly-NIMMO)(NMMO) [CAS 84051-81-0];
24. 3-Nitraza-1, 5-pentane diisocyanate [CAS 7406-61-9];
25. N-Methyl-p-Nitroaniline [CAS 100-15-2];
26. Organo-metallic coupling agents, specifically:
a. Neopentyl [diallyl] oxy, tri[dioctyl] phosphato titanate [CAS
103850-22-2]; also known as titanium IV, 2.2[bis 2-
propenolato-methyl, butanolato, tris (dioctyl) phosphato][CAS
110438-25-0]; or LICA 12[CAS 103850-22-2];
b. Titanium IV, [(2-propenolato-1) methyl, n-propanolatomethyl]
butanolato-1, tris(dioctyl)pyrophosphate; or KR3538;
c. Titanium IV, [(2-propenolato-1) methyl, n-propanolatomethyl]
butanolato-1, tris(dioctyl)phosphate;
27. Polycyanodifluoroaminoethyleneoxide (PCDE);
28. Polyfunctional aziridine amides with isophthalic, trimesic (BITA
or butylene imine trimesamide), isocyanuric or trimethyladipic
backbone structures and 2-methyl or 2-ethyl substitutions on the
aziridinering;
29. Polyglycidylnitrate or poly (nitratomethyl oxirane); (Poly-
GLYN) (PGN) [CAS 27814-48-8];
30. Polynitroorthocarbonates;
31. Propyleneimine, 2-Methylaziridine [CAS 75-55-8];

32. Tetraacetyldibenzylhexaazaisowurtzitane (TAIW);
33. Tetraethylenepentaamineacrylonitrile (TEPAN)
[CAS 68412-45-3]; cyanoethylated polyamine and its salts;
34. Tetraethylenepentaamineacrylonitrileglycido 1 (TEPANOL)
[CAS 68412-4 4]; cyanoethylated polyamine adducted with
glycidol and its salts;
35. Triphenyl bismuth (TPB) [CAS 603-33-8];
36. Tris-1-(2-methyl)aziridinyl phosphine oxide (MAPO)
[CAS 57-39-6; bis(2-methyl aziridinyl) 2-(2-hydroxypropanoxy)
propylamino phosphine oxide (BOBBA 8); and other MAPO
derivatives;
37. 1,2,3-Tris[1,2-bis(difluoroamino)ethoxy] propane
[CAS 53159-39-0]; tris vinoxy propane adduct (TVOPA);
38. 1,3,5-Trichlorobenzene [CAS 10 8-70-3];
39. 1,2,4 trihydroxybutane (1,2,4 butanetriol);
40. 1,3,5,7 tetraacetyl-1,3,5,7,-tetraaza cyclo-octane (TAT)
[CAS 41378-98-7];
41. 1,4,5,8 Tetraazadecalin [CAS 5409-42-7];
42. Low (less than 10,000) molecular weight, alcohol-functionalised,
poly(epichlorohydrin); poly(epichlorohydrindiol) and triol.
except:
Boron and boron carbide enriched with boron-10 (20% or more of total boron-10
content).
ML9 Combatant vessels and vessels (surface or underwater specially designed or
modified for offensive or defensive action, whether or not converted to non-military
use, regardless of current state of repair or operating condition, and whether or not
they contain weapon delivery systems or armour, and components therefor specially
designed or modified for military use.
ML10 “Aircraft”, unmanned airborne vehicles, aero engines and “aircraft”
equipment, related “goods” and components, specially designed or modified for
military use, as follows:
a. Combat “aircraft” and specially designed components therefor;
b. Other “aircraft” specially designed or modified for military use,
including military reconnaissance, assault, military training,
transporting and airdropping troops or military equipment, logistics
support, and specially designed components therefor;
c. Aero-engines specially designed or modified for miliary use, and specially designed components therefor;
d. Unmanned airborne vehicles, including remotely piloted air vehicles
(RPVs), and autonomous, programmable vehicles specially designed

or modified for military use and their launchers, ground support and
related equipment for command and control;
e. Airborne equipment, including airborne refuelling equipment,
specially designed for use with the “aircraft” specified in entry
ML10.a. or ML10.b. or the aero-engines specified in entry ML10.c.,
and specially designed components therefor;
f. Pressure refuellers, pressure refuelling equipment, equipment
specially designed to facilitate operations in confined areas and
ground equipment, developed specially for “aircraft” specified in
entry ML10.a. or ML10.b., or for aero-engines specified in entry
ML10.c;
g. Pressurised breathing equipment and partial pressure suits for use in
“aircraft”, anti-g suits military crash helmet and protective masks,
liquid oxygen converters used for “aircraft” or missiles, and
catapults and cartridge actuated devices for emergency escape of
personnel from “aircraft”;
h. Parachutes used for combat personnel, cargo dropping or “aircraft”
deceleration, as follows:
1. Parachutes for:
a. Pin point dropping of military personnel;
b. Dropping of paratroopers;
2. Cargo parachutes;
3. Paragliders, drag parachutes, drogue parachutes for stabilisation
and attitude control of dropping bodies, (e.g recovery capsules,
ejection seats, bombs);
4. Drogue parachutes for use with ejection seat systems for
deployment and inflation sequence regulation of emergency
parachutes;
5. Recovery parachutes for guided missiles, drones or space
vehicles;
6. Approach parachutes and landing deceleration parachutes;
7. Other military parachutes;
i. Automatic piloting systems for parachuted loads: equipment specially
designed or modified for military use for controlled opening jumps at
any height, including oxygen equipment.
Note:
Entries ML10.b. and ML.10.c. on specially designed components and related equipment for non-military “aircraft” or aero-engines modified for military use
include only those military components and to military related equipment required for
the modification to military use.

ML11 Electronic equipment, not controlled elsewhere in this Part of this
Schedule, specially designed for military use and specially designed components
therefor.
ML12 High velocity kinetic energy weapon systems and related equipment, as
follows, and specially designed components therefor:
a. Kinetic energy weapon systems specially designed for destruction or
effecting mission abort of a target;
b. Specially designed test and evaluation facilities and test models,
including diagnostic instrumentation and targets, for dynamic testing
of kinetic energy projectiles and systems.
N.B. For weapon systems using sub-calibre ammunition or employing
solely chemical propulsion, and ammunition therefor, see entries
ML1 to ML4.
ML13 Armoured or protective equipment and constructions and components, as
follows:
a. Armoured plate as follows:
1. Manufactured to comply with a military standard or
specification; or
2. Suitable for military use;
b. Constructions of metallic or non-metallic materials or combinations
thereof specially designed to provide ballistic protection for military
systems;
c. Military helmets(a) 1 ;
except:
a. Conventional steel helmets, neither modified or designed to accept,
nor equipped with any type of accessory device;
b. Helmets manufactured before 1945;
c. Body armour and flak suits manufactured according to military
standards or specifications, or equivalent, and specially designed
components therefor;
except:
Individual suits of body armour for personal protection and
accessories therefor when accompanying their users.
PL5014 Specially designed components for the “goods” specified in entries
ML.13.a., ML.13.b. and ML.13.c.
ML14 Specialised equipment for military training or for simulating military scenarios and specially designed components and accessories therefor.
1
See also ML10.g.

ML15 Imaging or countermeasure equipment, as follows, specially designed for
military use, and specially designed component and accessories therefor;
a. Recorders and image processing equipment;
b. Cameras, photographic equipment and film processing equipment;
c. Image intensifier equipment;
d. Infrared or thermal imaging equipment;
e. Imaging radar sensor equipment;
f. Countermeasure or counter-countermeasure equipment for the
equipment specified in entries ML.15.a. to ML.15.e.
except:
“First generation image intensifier tubes”.
ML16 Forgings, castings and other unfinished products the use of which in a
controlled product is identifiable by material composition, geometry or function, and
which are specially designed for any of the “goods” specified in entries ML1 to ML4,
ML6, ML9, ML10, ML12 and ML19.
PL5020 Forgings, castings and semi-finished products specially designed for
“goods” specified in entry PL5006 or PL5018.
ML17 Miscellaneous “goods”, materials and libraries, as follows, and specially
designed components therefor:
a. Self-contained diving and underwater swimming apparatus, as
follows:
1. Closed or semi-closed circuit (rebreathing) apparatus specially
designed for military use (i.e., specially designed to be non
magnetic);
2. Specially designed components for use in the conversion of open-
circuit apparatus to military use;
3. Articles designed exclusively for military use with self-contained
diving and underwater swimming apparatus;
b. Construction equipment specially designed for military use;
c. Fittings, coatings and treatments for signature suppression, specially
designed for military use;
d. Field engineer equipment specially designed for use in a combat zone;
e. “Robots”, “robot” controllers and “robot” “endeffectors”, having
any of the following characteristics:
1. Specially designed for military use;
2. Incorporating means of protecting hydraulic lines against
externally induced punctures caused by ballistic fragments (e.g.,
incorporating self-sealing lines) and designed to use hydraulic
fluids with flash points higher than 839K (566 0 C); or

3. Specially designed or rated for operating in an electro-magnetic
pulse (EMP) environment;
f. Libraries (parametric technical databases) specially designed for
military use with equipment specified in this Part of this Schedule;
g. Nuclear power generating equipment or propulsion equipment,
including “nuclear reactors”, specially designed for military use and
components therefor specially designed or modified for military use;
h. “Goods” and material, coated or treated for signature suppression,
specially designed for military use, other than those controlled
elsewhere in this Part of this Schedule;
i. Simulators specially designed for military “nuclear reactors”;
j. Mobile repair shops specially designed to service military equipment;
k. Field generators specially designed for military use; and
l. Containers specially designed for military use.
Technical Note:
For the purpose of entry ML17, the term “library” (parametric
technical database) means a collection of technical information of a
military nature, reference to which may enhance the performance of
military equipment or systems.
ML18 Equipment and “technology” for the production (including design,
examination, manufacture, testing and checking) of “goods” referred to in this Part of
this Schedule, as follows:
a. Specially designed or modified production equipment for the
production of products specified in this Part of this Schedule, and
specially designed components therefor;
b. Specially designed environmental test facilities and specially designed
equipment therefor, for the certification, qualification or testing of
products specified in this Part of this Schedule;
c. Specific production “technology”, even if the equipment with which
such “technology” is to be used is not controlled;
d. “Technology” specific to the design of the assembly of components
into and the operation, maintenance and repair of complete production
installations even if the components themselves are not controlled.
PL5017 Equipment and test models specially designed or modified for the
“development” or use of military “goods” specified in this Part of this Schedule.
ML19 Directed energy weapon systems (DEW) related or countermeasure equipment
and test models, as follows, and specially designed components therefor:
a. “Laser” systems specially designed for destruction or effecting
mission-abort of a target;

b. Particle beam systems capable of destruction or effecting mission-
abort of a target;
c. High power radio-frequency (RF) systems capable of destruction or
effecting mission-abort of a target;
d. Equipment specially designed for the detection or identification of, or
defence against systems specified in entries ML19.a. to ML19.c.;
e. Physical test models and related test results for the systems,
equipment and components specified in this entry.
ML20 Cryogenic and “superconductive” equipment, as follows, and specially
designed components and accessories therefor:
a. Equipment specially designed or configured to be installed in a
vehicle for military ground, marine, airborne or space applications,
capable of operating while in motion and of producing or maintaining
temperatures below 103K (-170 0 C);
b. “Superconductive” electrical equipment (rotating machinery and
transformers) specially designed or configured to be installed in a
vehicle for military ground, marine, airborne or space applications,
capable of operating while in motion; except:
Direct-current hybrid homopolar generators that have single-pole
normal metal armatures which rotate in a magnetic field produced by
superconducting windings, provided those windings are the only
superconducting component in the generator.
ML21 “Software” as follows:
a. “Software” specially designed or modified for the “development”,
“production” or “use” of equipment or materials specified in this
Part of this Schedule;
b. Specific “software”, as follows:
1. “Software” specially designed for:
a. Modelling, simulation or evaluation of military weapon
systems;
b. “Development”, monitoring, maintenance or up-dating
of “software” embedded in military weapon system;
c. Modelling or simulating military operation scenarios,
not specified in ML14;
d. Command, Communications, Control and Intelligence
(C 3 I) applications;
2. “Software” for determining the effects of conventional,
nuclear, chemical or biological warfare weapons.
PL5001 Other security and para-military police “goods” as follows:

a. Acoustic devices represented by the manufacturers or suppliers
thereof as suitable for riot control purposes and specialised
components therefor;
b. Anti-riot shields and components therefor;
c. Leg-irons, shackles (excluding any pair of handcuffs the maximum
dimension of which when locked does not exceed 240 mm) and
gangchains, specially designed for restraining human beings;
d. Portable anti-riot devices for administering an electric shock or an
incapacitating substances, and specialised components therefor;
e. Water cannon and components therefor;
f. Riot control vehicles which have been specially designed or modified
to be electrified to repel boarders.
ML22 “Technology” according to the General Technology Note for the
“development”, “production” or “use” of “goods” specified in this Part of this
Schedule other than “technology” controlled in entries ML7 and ML18.
__________


SCHEDULE 2
(Regulation 3)

Afghanistan
Angola
Argentina
Armenia
Azerbaijan
Bosnia-Herzegovina
Burma (Myanmar)
Burundi
China (People's Republic)
Croatia
Liberia
Nigeria
Rwanda
Somalia
Sudan
Tanzania
Uganda
Yugoslavia (Federal Republic of)
Zaire
__________