Commission Decision No 78/2002/ECSC

of 17 January 2002

derogating from High Authority Recommendation No 1/64 concerning an increase in the protective duty on iron and steel products at the external frontiers of the Community (169th derogation)

THE COMMISSION OF THE EUROPEAN COMMUNITIES,

Having regard to the Treaty establishing the European Coal and Steel Community, and in particular the third paragraph of Article 71 thereof,

Having regard to High Authority Recommendation No 1/64 of 15 January 1964 to the Governments of the Member States concerning an increase in the protective duty on iron and steel products at the external frontiers of the Community(1), as last amended by Recommendation 88/27/ECSC(2), and in particular Article 3 thereof,

Whereas:

(1) Certain iron and steel products indispensable to the manufacture of certain goods and having very special physical and chemical characteristics are not produced in the Community, or are produced in insufficient quantities. For a number of years this insufficiency has been overcome by duty-free tariff quotas. Since Community producers are still not in a position to comply with users' present quality requirements, it is necessary to open a duty-free tariff quota at a level guaranteeing the supply of users.

(2) Import of these products on preferential terms is unlikely to cause injury to iron and steel undertakings in the Community which produce directly competing products.

(3) These tariff quotas are unlikely to jeopardise the objectives of Recommendation No 1/64, but will help to maintain existing trade flows between the Community and non-member countries.

(4) These are special cases in the commercial policy field justifying the authorisation of derogations pursuant to Article 3 of Recommendation No 1/64.

(5) It is necessary to make sure that the tariff quotas granted will have no other function than to meet the specific needs of certain processing industries.

(6) The Governments of the Member States have been consulted on the tariff quota set out below.

(7) Commission Regulation (EC) No 1427/97(3), which amends Regulation (EEC) No 2454/93(4) laying down provisions for the implementation of the Community Customs Code, fixes rules for managing tariff quotas to be used in chronological order of the dates of declarations,

HAS ADOPTED THIS DECISION:

Article 1

1. Member States are hereby authorised to derogate from the obligations arising pursuant to Article 1 of High Authority Recommendation No 1/64 to the extent necessary to suspend at the levels indicated the customs duties on the products set out below, within the quantities of the tariff quota set out below:

>TABLE>

2. The abovementioned products must, in addition, comply with the following physical specifications:

(a) Products with CN codes ex 7209 16 90 and ex 7209 17 90:

High carbon steel with a carbon content by weight of 0,64-0,70 % for the production of assembly/conveyor belts with a permissible operating temperature of 400 °C. Tensile strength 1200 N/mm² (± 10 %). Other elements or properties following special technical specification (HM 1708).

(b) Products with CN codes ex 7219 32 10 11, ex 7219 33 10 11 and ex 7219 34 10 11:

"NICRO" stainless steel for the production of assembly/conveyor belts with a permissible operating temperature of 350 °C.

Type (i): tensile strength 1050 N/mm² (± 10 %). Chemical composition: maximum carbon content 0,06 %, 13 % chromium content, 4 % nickel content.

Other elements or properties following special technical specification (HM 1708).

Type (ii): tensile strength 1200 N/mm² (± 15 %). Chemical composition: maximum carbon content 0,15 %, 17 % chromium content, 7 % nickel content.

Other elements or properties following special technical specification (HM 1708).

(c) Products with CN codes ex 7219 33 10 13 and ex 7219 34 10 13:

Stainless steel for the production of assembly/conveyor belts.

Type (i): tensile strength 1200 N/mm². Chemical composition: 0,1 % carbon content, 0,6 % silicon content, 1,4 % manganese content, 17,5 % chromium content, 7,5 % nickel content.

Other elements or properties following special technical specification (HM 1712).

Type (ii): tensile strength 1200 N/mm². Chemical composition: 0,06 % carbon content, 0,6 % silicon content, 1,4 % manganese content, 18,5 % chromium content, 8,5 % nickel content.

Other elements or properties following special technical specification.

Type (iii): tensile strength 1000 N/mm². Chemical composition: 0,05 % carbon content, 0,6 % silicon content, 1,7 % manganese content, 17,5 % chromium content, 12,5 % nickel content, 2,7 % molybdenum content.

Other elements or properties following special technical specification.

Type (iv): tensile strength 1080 N/mm². Chemical composition: maximum carbon content 0,05 %, maximum silicon content 1 %, 13 % chromium content, 4 % nickel content, 0,3 % titanium content.

Other elements or properties following special technical specification (HM 1710).

Type (v): tensile strength 1150 N/mm². Chemical composition: maximum carbon content 0,08 %, 1,5 % silicon content, 14 % chromium content, 7 % nickel content, 0,7 % copper content.

Other elements or properties following special technical specification (HM 1701).

Type (vi): tensile strength 1200 N/mm². Chemical composition: 0,03 % carbon content, 0,6 % silicon content, 15,25 % chromium content, 4,9 % nickel content, 3,25 % copper content.

Other elements or properties following special technical specification.

NB:

the composition of products (a), (b) and (c)(i) to (vi) may vary within the limits of the standards in force relating to analysis.

Article 2

Member States are hereby authorised to derogate from the obligations arising pursuant to Article 1 of High Authority Recommendation No 1/64 to the extent necessary to suspend at the levels indicated the customs duties on the products set out below, within the quantities of the tariff quota set out below:

>TABLE>

Article 3

The tariff quotas referred to in Articles 1 and 2 shall be managed by the Commission, in accordance with Articles 308a to 308c of Regulation (EEC) No 2454/93. The Commission may make any appropriate administrative measures to ensure that they are managed efficiently.

Article 4

Each Member State shall ensure that importers of the products in question have equal and continuous access to the quotas for as long as the balance of the relevant quota volume so permits.

Article 5

Following the expiry of the Treaty establishing the European Coal and Steel Community on 23 July 2002, the relevant provisions of the Treaty establishing the European Community shall apply.

Article 6

The Member States and the Commission shall cooperate closely to ensure that this Decision is complied with.

Article 7

This Decision shall enter into force on the third day following its publication in the Official Journal of the European Communities.

It shall apply from 1 January until 31 December 2002.

This Decision shall be binding in its entirety and directly applicable in all Member States.

Done at Brussels, 17 January 2002.

For the Commission

Pascal Lamy

Member of the Commission

(1) OJ 8, 22.1.1964, p. 99/64.

(2) OJ L 15, 20.1.1988, p. 13.

(3) OJ L 196, 24.7.1997, p. 31.

(4) OJ L 253, 11.10.1993, p. 1.