Published: 2013-04-18
Key Benefits:
23.4.2013 |
EN |
Official Journal of the European Union |
L 111/103 |
COMMISSION IMPLEMENTING DECISION
of 18 April 2013
amending Decision 2005/1/EC authorising methods for grading pig carcasses in the Czech Republic as regards the formulas of the authorised methods and the presentation of such carcasses
(notified under document C(2013) 2037)
(Only the Czech text is authentic)
(2013/187/EU)
THE EUROPEAN COMMISSION,
Having regard to the Treaty on the Functioning of the European Union,
Having regard to Council Regulation (EC) No 1234/2007 of 22 October 2007 establishing a common organisation of agricultural markets and on specific provisions for certain agricultural products (Single CMO Regulation) (1), and in particular Article 43(m), in conjunction with Article 4 thereof,
Whereas:
(1) |
By Commission Decision 2005/1/EC (2), the use of six methods for grading pig carcasses in the Czech Republic was authorised. |
(2) |
Due to changes in the pig population in the Czech Republic, higher lean meat content can be expected for the present population of pigs for slaughter. It is therefore necessary to update the formulas of the authorised methods. |
(3) |
The Czech Republic has requested the Commission to authorise the replacement of the formulas used for grading pig carcasses on its territory and has presented a detailed description of the dissection trial, indicating the principles on which those formulas are based, the result of its dissection trial and the equations used for assessing the percentage of lean meat in the protocol provided for in Article 23(4) of Commission Regulation (EC) No 1249/2008 of 10 December 2008 laying down detailed rules on the implementation of the Community scales for the classification of beef, pig and sheep carcasses and the reporting of prices thereof (3). |
(4) |
Examination of that request has revealed that the conditions for authorising those new formulas are fulfilled. Those formulas should therefore be authorised in the Czech Republic. |
(5) |
The Czech Republic has requested the Commission to be authorised to provide for a presentation of pig carcasses different from the standard presentation defined in the first paragraph of point B.III of Annex V to Regulation (EC) No 1234/2007. |
(6) |
In accordance with the second paragraph of point B.III of Annex V to Regulation (EC) No 1234/2007, Member States may be authorised to provide for a presentation of pig carcasses different from the standard presentation defined in the first paragraph of that point, where normal commercial practice in their territory differs from that standard presentation. In its request, the Czech Republic specified that in its territory it is commercial practice that carcasses can be presented without ears and with the flare fat. These presentations that differ from the standard presentation should therefore be authorised in the Czech Republic. |
(7) |
In order to establish quotations for pig carcasses on a comparable basis, this different presentation should be taken into account by adjusting the weight recorded in such cases in relation to the weight for standard presentation. |
(8) |
Decision 2005/1/EC should therefore be amended accordingly. |
(9) |
Modifications of the apparatus or grading methods should not be allowed, unless they are explicitly authorised by Commission Implementing Decision. |
(10) |
In view of the technical circumstances while introducing new formulas and new equations, the formulas of the authorised methods for grading pig carcasses authorised under this Decision should apply from 1 July 2013. |
(11) |
The measures provided for in this Decision are in accordance with the opinion of the Management Committee for the Common Organisation of the Agricultural Markets, |
HAS ADOPTED THIS DECISION:
Article 1
Decision 2005/1/EC is amended as follows:
(1) |
the third paragraph of Article 1 is replaced by the following: ‘As regards the apparatus “Ultra FOM 300” and “Ultra-sound IS-D-05” it is laid down that after the end of the measurement procedure it must be possible to verify on the carcass that the apparatus measured the values of measurement P2 on the site provided for in the Annex, Part 4, point 3 and Part 5, point 3. The corresponding marking of the measurement site must be made at the same time as the measurement procedure.’; |
(2) |
Article 1a is replaced by the following: ‘Article 1a Notwithstanding the standard presentation laid down in the first paragraph of point B.III of Annex V to Regulation (EC) No 1234/2007, pig carcasses in the Czech Republic may be presented:
|
(3) |
Article 2 is replaced by the following: ‘Article 2 Modifications of the authorised apparatus or grading methods shall not be allowed, unless those modifications are explicitly authorised by Commission Implementing Decision.’; |
(4) |
the Annex is amended in accordance with the Annex to this Decision. |
Article 2
This Decision shall apply from 1 July 2013.
Article 3
This Decision is addressed to the Czech Republic.
Done at Brussels, 18 April 2013.
For the Commission
Dacian CIOLOȘ
Member of the Commission
(1) OJ L 299, 16.11.2007, p. 1.
(3) OJ L 337, 16.12.2008, p. 3.
ANNEX
The Annex to Decision 2005/1/EC is amended as follows:
(1) |
in Part 1 (Zwei-Punkte-Messverfahren (ZP)), point 2 is replaced by the following:
|
(2) |
in Part 2 (Fat-O-Meater (FOM)), point 3 is replaced by the following:
|
(3) |
in Part 3 (Hennessy Grading Probe (HGP 4)), point 3 is replaced by the following:
|
(4) |
in Part 4 (Ultra-FOM 300), point 3 is replaced by the following:
|
(5) |
in Part 5 (Ultra-sound IS-D-05), point 3 is replaced by the following:
|
(6) |
in Part 6 (Needle IS-D-15), point 3 is replaced by the following:
|