Advanced Search

Commission Regulation (EC) No 1288/2005 of 4 August 2005 initiating an investigation concerning the possible circumvention of anti-dumping measures imposed by Council Regulation (EC) No 964/2003 on imports of certain tube or pipe fittings, of iron or stee


Published: 2005-08-04

Subscribe to a Global-Regulation Premium Membership Today!

Key Benefits:

Subscribe Now for only USD$40 per month.

5.8.2005   

EN

Official Journal of the European Union

L 204/3


COMMISSION REGULATION (EC) No 1288/2005

of 4 August 2005

initiating an investigation concerning the possible circumvention of anti-dumping measures imposed by Council Regulation (EC) No 964/2003 on imports of certain tube or pipe fittings, of iron or steel originating, inter alia, in the People’s Republic of China by imports of certain tube or pipe fittings, of iron or steel, consigned from the Philippines, whether declared as originating in the Philippines or not, and making such imports subject to registration

THE COMMISSION OF THE EUROPEAN COMMUNITIES,

Having regard to the Treaty establishing the European Community,

Having regard to Council Regulation (EC) No 384/96 of 22 December 1995 on protection against dumped imports from countries not members of the European Community (1) (the basic Regulation), and in particular Articles 13(3), 14(3) and 14(5) thereof,

After having consulted the Advisory Committee,

Whereas:

A.   REQUEST

(1)

The Commission has received a request pursuant to Article 13(3) of the basic Regulation to investigate the possible circumvention of the anti-dumping measures imposed on imports of certain tube or pipe fittings, of iron or steel, originating, inter alia, in the People’s Republic of China.

(2)

The request was lodged on 23 June 2005 by the Defence Committee of the Steel Butt-Welding Fittings Industry of the European Union on behalf of four Community producers.

B.   PRODUCT

(3)

The product concerned by the possible circumvention is tube or pipe fittings (other than cast fittings, flanges and threaded fittings), of iron or steel (not including stainless steel), with a greatest external diameter not exceeding 609,6 mm, of a kind used for butt-welding or other purposes, normally declared under CN codes ex 7307 93 11, ex 7307 93 19, ex 7307 99 30 and ex 7307 99 90 originating in the People’s Republic of China (the product concerned). These codes are given for information only.

(4)

The product under investigation is tube or pipe fittings (other than cast fittings, flanges and threaded fittings), of iron or steel (not including stainless steel), with a greatest external diameter not exceeding 609,6 mm, of a kind used for butt-welding or other purposes, consigned from the Philippines (the product under investigation) normally declared under the same codes as the product concerned.

C.   EXISTING MEASURES

(5)

The measures currently in force and possibly being circumvented are anti-dumping measures imposed by Council Regulation (EC) No 964/2003 (2) as last amended by Regulation (EC) No 2212/2003 (3).

D.   GROUNDS

(6)

The request contains sufficient prima facie evidence that the anti-dumping measures on imports of certain tube or pipe fittings, of iron or steel, originating in the People’s Republic of China are being circumvented by means of the transhipment and incorrect declaration of origin via the Philippines of certain tube or pipe fittings, of iron or steel.

(7)

The evidence submitted is as follows.

 

The request shows that a significant change in the pattern of trade involving exports from the People’s Republic of China and the Philippines to the Community has taken place following the imposition of measures on the product concerned, and that there is insufficient due cause or justification other than the imposition of the duty for such a change. This change in the pattern of trade appears to stem from the transhipment and incorrect declaration of origin of certain tube or pipe fittings, of iron or steel, originating in the People’s Republic of China via the Philippines.

 

Furthermore, the request contains sufficient prima facie evidence that the remedial effects of the existing anti-dumping measures on the product concerned are being undermined in terms of quantities. Significant volumes of imports of certain tube or pipe fittings, of iron or steel, from the Philippines appear to have replaced imports of the product concerned originating in the People’s Republic of China.

 

Finally, the request contains sufficient prima facie evidence that the prices of certain tube or pipe fittings, of iron or steel, are dumped in relation to the normal value previously established for the product concerned.

 

Should circumvention practices via the Philippines covered by Article 13 of the basic Regulation other than transhipment and incorrect declaration of origin be identified in the course of the investigation, the investigation may cover these practices also.

E.   PROCEDURE

(8)

In the light of the above, the Commission has concluded that sufficient evidence exists to justify the initiation of an investigation pursuant to Article 13 of the basic Regulation and to make imports of certain tube or pipe fittings, of iron or steel, consigned from the Philippines, whether declared as originating in the Philippines or not, subject to registration, in accordance with Article 14(5) of the basic Regulation.

(a)   Questionnaires

(9)

In order to obtain the information it deems necessary for its investigation, the Commission will send questionnaires to the exporters/producers and to the associations of exporters/producers in the Philippines, to the exporters/producers and to the associations of exporters/producers in the People’s Republic of China, to the importers and to the associations of importers in the Community which cooperated in the investigation that led to the existing measures and to the authorities of the People’s Republic of China and the Philippines. Information, as appropriate, may also be sought from the Community industry.

(10)

In any event, all interested parties should contact the Commission forthwith, but not later than the time limit set in Article 3 of this Regulation, - in order to find out whether they are listed in the request and, if necessary, request a questionnaire - within the time limit set in Article 3(1) of this Regulation, given that the time limit set in Article 3(2) of this Regulation applies to all interested parties.

(11)

The authorities of the People’s Republic of China and the Philippines will be notified of the initiation of the investigation.

(b)   Collection of information and holding of hearings

(12)

All interested parties are hereby invited to make their views known in writing and to provide supporting evidence. Furthermore, the Commission may hear interested parties, provided that they make a request in writing and show that there are particular reasons why they should be heard.

(c)   Exemption of registration of imports or measures

(13)

In accordance with Article 13(4) of the basic Regulation, imports of the product under investigation may be exempted from registration or measures if the importation does not constitute circumvention.

(14)

Since the possible circumvention takes place outside the Community, exemptions may be granted, in accordance with Article 13(4) of the basic Regulation, to producers of the product concerned that can show that they are not related to any producer subject to the measures and that are found not to be engaged in circumvention practices as defined in Articles 13(1) and 13(2) of the basic Regulation. Producers wishing to obtain an exemption should submit a request duly supported by evidence within the time limit indicated in Article 3(3) of this Regulation.

F.   REGISTRATION

(15)

Pursuant to Article 14(5) of the basic Regulation, imports of the product under investigation should be made subject to registration in order to ensure that, should the investigation result in findings of circumvention, anti-dumping duties of an appropriate amount can be levied retroactively from the date of registration of such imports consigned from the Philippines.

G.   TIME LIMITS

(16)

In the interest of sound administration, time limits should be stated within which:

interested parties may make themselves known to the Commission, present their views in writing and submit questionnaire replies or any other information to be taken into account during the investigation,

producers in the Philippines may request exemption from registration of imports or measures,

interested parties may make a written request to be heard by the Commission.

(17)

Attention is drawn to the fact that the exercise of most procedural rights set out in the basic Regulation depends on the party’s making itself known within the time limits mentioned in Article 3 of this Regulation.

H.   NON-COOPERATION

(18)

In cases in which any interested party refuses access to or does not provide the necessary information within the time limits, or significantly impedes the investigation, findings, affirmative or negative, may be made in accordance with Article 18 of the basic Regulation, on the basis of the facts available.

(19)

Where it is found that any interested party has supplied false or misleading information, the information shall be disregarded and use may be made, in accordance with Article 18 of the basic Regulation, of facts available. If an interested party does not cooperate or cooperates only partially and findings are therefore based on facts available in accordance with Article 18 of the basic Regulation, the result may be less favourable to that party than if it had cooperated,

HAS ADOPTED THIS REGULATION:

Article 1

An investigation is hereby initiated pursuant to Article 13(3) of Regulation (EC) No 384/96, in order to determine if imports into the Community of tube or pipe fittings (other than cast fittings, flanges and threaded fittings), of iron or steel (not including stainless steel), with a greatest external diameter not exceeding 609,6 mm, of a kind used for butt-welding or other purposes, falling within CN codes ex 7307 93 11 (TARIC code 7307931195), ex 7307 93 19 (TARIC code 7307931995), ex 7307 99 30 (TARIC code 7307993095) and ex 7307 99 90 (TARIC code 7307999095), consigned from the Philippines, whether originating in the Philippines or not, are circumventing the measures imposed by Regulation (EC) No 964/2003.

Article 2

The customs authorities are hereby directed, pursuant to Articles 13(3) and 14(5) of Regulation (EC) No 384/96, to take the appropriate steps to register the imports into the Community identified in Article 1 of this Regulation.

Registration shall expire nine months following the date of entry into force of this Regulation.

The Commission, by Regulation, may direct customs authorities to cease registration in respect of imports into the Community of products manufactured by producers having applied for an exemption of registration and having been found not to be circumventing the anti-dumping duties.

Article 3

1.   Questionnaires should be requested from the Commission within 15 days from publication of this Regulation in the Official Journal of the European Union.

2.   Interested parties, if their representations are to be taken into account during the investigation, must make themselves known by contacting the Commission, present their views in writing and submit questionnaire replies or any other information within 40 days from the date of the publication of this Regulation in the Official Journal of the European Union, unless otherwise specified.

3.   Producers in the Philippines requesting exemption from registration of imports or measures should submit a request duly supported by evidence within the same 40-day time limit.

4.   Interested parties may also apply to be heard by the Commission within the same 40-day time limit.

5.   Any information relating to the matter, any request for a hearing or for a questionnaire as well as any request for exemption must be made in writing (not in electronic format, unless otherwise specified) and must indicate the name, address, e-mail address, telephone, fax and/or telex numbers of the interested party. All written submissions, including the information requested in this Regulation, questionnaire replies and correspondence provided by interested parties on a confidential basis shall be labelled as ‘Limited (4) and, in accordance with Article 19(2) of the basic Regulation, shall be accompanied by a non-confidential version, which will be labelled ‘For inspection by interested parties’.

Commission address for correspondence:

European Commission

Directorate-General for Trade

Directorate B

Office: J-79 5/16

B-1049 Brussels

Fax (+32-2) 295 65 05

Article 4

This Regulation shall enter into force on the day following that of its publication in the Official Journal of the European Union.

This Regulation shall be binding in its entirety and directly applicable in all Member States.

Done at Brussels, 4 August 2005.

For the Commission

Peter MANDELSON

Member of the Commission


(1)  OJ L 56, 6.3.1996, p. 1. Regulation as last amended by Regulation (EC) No 461/2004 (OJ L 77, 13.3.2004, p. 12).

(2)  OJ L 139, 6.6.2003, p. 1.

(3)  OJ L 332, 19.12.2003, p. 3.

(4)  This means that the document is for internal use only. It is protected pursuant to Article 4 of Regulation (EC) No 1049/2001 of the European Parliament and of the Council regarding public access to European Parliament, Council and Commission documents (OJ L 145, 31.5.2001, p. 43). It is a confidential document pursuant to Article 19 of the basic Regulation and Article 6 of the WTO Agreement on Implementation of Article VI of the GATT 1994 (Anti-dumping Agreement).