Coppermine Airport Zoning Regulations

Link to law: http://laws-lois.justice.gc.ca/eng/regulations/SOR-93-523/FullText.html

Subscribe to a Global-Regulation Premium Membership Today!

Key Benefits:

Subscribe Now
Coppermine Airport Zoning Regulations

SOR/93-523AERONAUTICS ACT
Registration 1993-12-02
Regulations Respecting Zoning at Coppermine Airport
P.C. 1993-1935 1993-12-02Whereas, pursuant to section 5.5 of the Aeronautics Act, a copy of the proposed Regulations respecting zoning at Coppermine Airport, substantially in the form set out in the schedule hereto, was published in two successive issues of the Canada Gazette Part I, on April 3rd and 10th, 1993, and in two successive issues of the Mackenzie Times on April 28th and May 5th, 1993, in the L’Aquilon on May 7, 1993, and in the May/June, 1993, issue of the Native Journal, and a reasonable opportunity was thereby afforded to interested persons to make representations to the Minister of Transport with respect thereto;
Therefore, His Excellency the Governor General in Council, on the recommendation of the Minister of Transport, pursuant to section 5.4 of the Aeronautics Act, is pleased hereby to make the annexed Regulations respecting zoning at Coppermine Airport.Short Title

1 These Regulations may be cited as the Coppermine Airport Zoning Regulations.

Interpretation

2 (1) In these Regulations,

airport
airport means the Coppermine Airport, in the vicinity of Coppermine, in the Northwest Territories; (aéroport)
airport reference point
airport reference point means the point described in Part I of the schedule; (point de repère de l’aéroport)
approach surfaces
approach surfaces means the imaginary inclined planes that extend upward and outward from each end of a strip, which planes are more particularly described in Part II of the schedule; (surfaces d’approche)
outer surface
outer surface means the imaginary plane located above and in the immediate vicinity of the airport, which plane is more particularly described in Part III of the schedule; (surface extérieure)
strip
strip means the rectangular portion of the landing area of the airport, including the runway, prepared for the take-off and landing of aircraft in a particular direction, which portion is more particularly described in Part IV of the schedule; (bande)
transitional surfaces
transitional surfaces means the imaginary inclined planes that extend upward and outward from the lateral limits of a strip and its approach surfaces, which planes are more particularly described in Part V of the schedule. (surfaces de transition)

(2) For the purposes of these Regulations, the elevation of the airport reference point is 11.9 m above sea level.

Application

3 These Regulations apply to all land, including public road allowances, that is adjacent to or in the vicinity of the airport, which land is more particularly described in Part VI of the schedule.

General

4 No person shall erect or construct on any land to which these Regulations apply, any building, structure or object or any addition to any existing building, structure or object, the highest point of which will exceed in elevation at the location of that point

(a) the approach surfaces;
(b) the outer surface; or
(c) the transitional surfaces.

SCHEDULE(Sections 2 and 3)

PART I Description of the Airport Reference Point

The airport reference point, shown on Coppermine Airport Zoning Plan No. E.2924, dated September 3, 1991, is a point located on the centre line of runway 121-301 distant 762 m from the threshold of runway 301.
PART II Description of the Approach Surfaces

The approach surfaces, shown on Coppermine Airport Zoning Plan No. E.2924, dated September 3, 1991, are planes abutting each end of the strip associated with runway 121-301 and are described as follows:

(a) an inclined plane abutting the end of the strip associated with the approach to runway 121 having a ratio of 1 m measured vertically to 40 m measured horizontally rising to an imaginary horizontal line drawn at right angles to the projected centre line of the strip and distant 3 000 m measured horizontally from the end of the strip; the outer ends of the imaginary horizontal line being 525 m from the projected centre line; said imaginary horizontal line being 75 m above the elevation at the end of the strip; and
(b) an inclined plane abutting the end of the strip associated with the approach to runway 301 having a ratio of 1 m measured vertically to 40 m measured horizontally rising to an imaginary horizontal line drawn at right angles to the projected centre line of the strip and distant 3 000 m measured horizontally from the end of the strip; the outer ends of the imaginary horizontal line being 525 m from the projected centre line; said imaginary horizontal line being 75 m above the elevation at the end of the strip.

PART III Description of the Outer Surface

The outer surface, shown on Coppermine Airport Zoning Plan No. E.2924, dated September 3, 1991, is an imaginary plane established at a constant elevation of 45 m above the elevation of the airport reference point, except that, where that plane is less than 9 m above the surface of the ground, the outer surface is located at 9 m above the surface of the ground.
PART IV Description of the Strip

The strip associated with runway 121-301, shown on Coppermine Airport Zoning Plan No. E.2924, dated September 3, 1991, is 150 m in width, 75 m being on each side of the centre line of the runway and 1 644 m in length.
PART V Description of the Transitional Surfaces

Each transitional surface, shown on Coppermine Airport Zoning Plan No. E.2924, dated September 3, 1991, is an inclined plane rising at a ratio of 1 m measured vertically to 7 m measured horizontally at right angles to the centre line and projected centre line of the strip, extending upward and outward from the lateral limits of the strip and its approach surfaces to an intersection with the outer surface.
PART VI Description of the Land to Which These Regulations Apply

The outer boundary of the land to which these Regulations apply, shown on Coppermine Airport Zoning Plan No. E.2924, dated September 3, 1991, is a circle with a radius of 4 000 m centred on the airport reference point.