Vehicle Standard (Australian Design Rule 19/00 – Installation of Lighting and Light-Signalling Devices on L-Group Vehicles) 2006 Amendment 1
I, JAMES ERIC LLOYD, Minister for Local Government, Territories and Roads, determine this vehicle standard under subsection 7 (1) of the Motor Vehicle Standards Act 1989.
 
 
 
 
Dated               5 December 2006
 
 
 
 
 
 
 
 
 
[SIGNED]
 
 
 
 
 
 
 
James Eric Lloyd
 
Minister for Local Government, Territories and Roads
 
CONTENTS
 
1.           legislative provisions............................................................................ 3
2.           amendment of vehicle standard...................................................... 3
Schedule 1.................................................................................................................... 4
 
1.                                          legislative provisions
1.1.                                    Name of Legislative Instrument
1.1.1.                              This instrument is the Vehicle Standard (Australian Design Rule 19/00 – Installation of Lighting and Light-Signalling Devices on L-Group Vehicles) 2006 Amendment 1.
1.2.                                    Commencement
1.2.1.                              This instrument commences on the day after it is registered.
2.                                          amendment of vehicle standard
2.1.                                    The changes specified in Schedule 1 amend Vehicle Standard (Australian Design Rule 19/00 – Installation of Lighting and Light-Signalling Devices on L-Group Vehicles) 2006.
 
 
Schedule 1
[1]               Purpose and Scope, replace “moor” with “motor”.
[2]               Clause 19.6.101.3, replace “poston” with “position”.
[3]               Annex A, clause 19.6.1.5, amend to read ”For ‘LB2’ and ‘LE2’ category vehicles, the lamp may not move with the steering.”
[4]               Annex A, clause 19.6.2.1.4, amend to read “in the case of ’LB2’ category vehicles, 2 lamps to either ADR 54/... or ECE R 76/00.”