Advanced Search

Marine Orders - Part 58: International Safety Management Code, Issue 2 Amendment (Order No. 9 of 2006)

Subscribe to a Global-Regulation Premium Membership Today!

Key Benefits:

Subscribe Now for only USD$40 per month.
MARINE ORDERS Part 58 International Safety Management Code Issue 2
Amendment
Order No. 9 of 2006 Pursuant to subsection 425(1AA) of the Navigation Act 1912, I hereby make this Order amending Marine Orders, Part 58, Issue 2, in the manner set out herein, to come into operation on 1 August 2006.  
 
Clive Davidson
Chief Executive Officer 21 July 2006
 
 


Table of Contents
  1               Purpose & power 2               Amendment of principal provisions 3               Amendment of appendices                                 Previous issues
Issue 1, Order No 2 of 1998
Issue 2, Order No 10 of 2002
1  Purpose & power 1.1  Purpose This Marine Order makes amendments to Issue 2 of Marine Orders, Part 58 (International Safety Management Code), which gives effect to Chapter IX of SOLAS dealing with the International Safety Management Code. 1.2  Power 1.2.1  Section 191 of the Navigation Act provides that the regulations may make provision for and in relation to giving effect to SOLAS.  Chapter IX of SOLAS deals with the International Safety Management Code. 1.2.2  Subsection 425(1) of the Navigation Act provides for regulations to be made prescribing matters required or permitted to be prescribed or which are necessary or convenient to be prescribed for carrying out or giving effect to the Act. 1.2.3  Subsection 425(1AA) of the Navigation Act provides that AMSA may make orders with respect to any matter for or in relation to which provision may be made by regulation.
2  Amendment of principal provisions
2.1    In Provision 2, omit the definition of “ISM Code”; substitute the following definition: “ISM Code means the International Management Code for the Safe Operation of Ships and for Pollution Prevention (International Safety Management Code), set out in IMO Resolution A.741(18) as amended by MSC.104(73) and MSC.179(79), and reproduced in Appendix 1 to this Part;”   3  Amendment of Appendices 3.1    Omit Form 1 of Appendix 3; substitute the following:
Form 1 Form MO58/1 DOCUMENT OF COMPLIANCE
(Official seal)
 
(State)
 Certificate No. …………. Issued under the provisions of the
INTERNATIONAL CONVENTION FOR THE SAFETY OF LIFE AT SEA, 1974, as amended Under the authority of the Government of Australia by  ......................................................................................................................................  (person or organization authorized)
Name and address of the Company
.................................................................................................................
 
.................................................................................................................
 
(see paragraph 1.1.2 of the ISM Code)
THIS IS TO CERTIFY THAT the safety management system of the Company has been audited and that it complies with the requirements of the International Management Code for the Safe Operation of Ships and for Pollution Prevention (ISM Code) for the types of ships listed below (delete as appropriate): Passenger ship Passenger high-speed craft Cargo high-speed craft Bulk carrier Oil tanker Chemical tanker Gas carrier Mobile offshore drilling unit Other cargo ship This Document of Compliance is valid until........................................................subject to periodical verification. Completion date of the verification on which this certificate is based: …………………………………………… Issued at........................................................                                 (place of issue of the document)
Date of issue...................................
...........................................................................
 
(Signature of the duly authorized official issuing the document)
(Seal or stamp of issuing authority, as appropriate) Certificate No. …………. ENDORSEMENT FOR ANNUAL VERIFICATION THIS IS TO CERTIFY THAT, at the periodical verification in accordance with regulation IX/6.1 of the Convention and paragraph 13.4 of the ISM Code, the safety management system was found to comply with the requirements of the ISM Code.
 
 
1st ANNUAL VERIFICATION
Signed:..................................................
 
                 (Signature of authorized official)
 
Place:....................................................
 
Date:....................................................
 
 
2nd ANNUAL VERIFICATION
Signed:..................................................
 
                 (Signature of authorized official)
 
Place:....................................................
 
Date:....................................................
 
 
3rd ANNUAL VERIFICATION
Signed:..................................................
 
                 (Signature of authorized official)
 
Place:....................................................
 
Date:....................................................
 
 
4th ANNUAL VERIFICATION
Signed:..................................................
 
                 (Signature of authorized official)
 
Place:....................................................
 
Date:....................................................
3.2    Omit Form 2 of Appendix 3; substitute the following: Form 2 Form MO58/2 Certificate No. …………. SAFETY MANAGEMENT CERTIFICATE
(Official seal)
(State)
Issued under the provisions of the INTERNATIONAL CONVENTION FOR THE SAFETY OF LIFE AT SEA, 1974, as amended Under the authority of the Government of Australia by.......................................................................                                                                 (person or organization authorized) Name of ship:............................................................................................................................. Distinctive number or letters: ......................................................................................................... Port of registry:........................................................................................................................... Type of ship*: ..............................................................................................................................
Gross tonnage:................................................
IMO Number:.................................................
 
Name and address of the Company
.........................................................................................
 
.........................................................................................
 
(see paragraph 1.1.2 of the ISM Code)

THIS IS TO CERTIFY THAT the safety management system of the ship has been audited and that it complies with the requirements of the International Management Code for the Safe Operation of Ships and for Pollution Prevention (ISM Code), following verification that the Document of Compliance for the Company is applicable to this type of ship: This Safety Management Certificate is valid until.................................................... subject to periodical verification and the Document of Compliance remaining valid. Completion date of the verification on which this certificate is based: …………………………………………… Issued at........................................................                                 (place of issue of the certificate)
Date of issue...................................
...........................................................................
 
(Signature of the duly authorized official issuing the certificate)
(Seal or stamp of issuing authority, as appropriate)  
*    Insert the type of ship among the following: passenger ship, passenger high-speed craft, cargo high-speed craft, bulk carrier, oil tanker, chemical tanker, gas carrier, mobile offshore drilling unit, other cargo ship.
Certificate No. …………. ENDORSEMENT FOR PERIODICAL VERIFICATION AND ADDITIONAL VERIFICATION (IF REQUIRED) THIS IS TO CERTIFY THAT, at the periodical verification in accordance with regulation IX/6.1 of the Convention and paragraph 13.8 of the ISM Code, the safety management system was found to comply with the requirements of the ISM Code.
 
 
INTERMEDIATE VERIFICATION
Signed:.........................................................
(to be completed between the second and the third
                       (Signature of authorized official)
anniversary date
 
 
Place:...........................................................
 
Date:............................................................
 
 
ADDITIONAL VERIFICATION*
Signed:..................................................
 
                 (Signature of authorized official)
 
Place:....................................................
 
Date:....................................................
 
 
ADDITIONAL VERIFICATION*
Signed:..................................................
 
                 (Signature of authorized official)
 
Place:....................................................
 
Date:....................................................
 
 
ADDITIONAL VERIFICATION*
Signed:..................................................
 
                 (Signature of authorized official)
 
Place:....................................................
 
Date:....................................................
 
 
 
*    If applicable.  Reference is made to paragraph  3.4.1 of the Revised Guidelines on Implementation of the International Safety Management (ISM) Code by Administrations (IMO Resolution A.913(22)
 

* * * * * *