Vehicle Standard (Australian Design Rule 42/04 – General Safety Requirements) 2005
Amendment 1
 
I, JAMES ERIC LLOYD, Minister for Local Government, Territories and Roads, determine this vehicle standard under subsection 7 (1) of the Motor Vehicle Standards Act 1989.
 
 
 
 
Dated               5th OCTOBER  2007
 
 
 
 
 
 
 
 
 
 
 
[SIGNED]
 
 
 
James Eric Lloyd
Minister for Local Government, Territories and Roads
 
 
CONTENTS
 
 
 
1.           LEGISLATIVE provisions. 3
2.           AMENDMENT of vehicle standard.. 3
SCHEDULE 1. 4
 
1.                     LEGISLATIVE provisions
1.1                   Name of Legislative Instrument
1.1.1                This Instrument is the Vehicle Standard (Australian Design Rule 42/04 – General Safety Requirements) 2005 Amendment 1.
1.2                   Commencement
1.2.1                This Instrument commences on the day after it is registered.
2.                                          AMENDMENT of vehicle standard
2.1                   The changes specified in Schedule 1 amend Vehicle Standard (Australian Design Rule 42/04 – General Safety Requirements) 2005.
 
 
 
 
 
 
 
 
 
 
 
 
 
 
 
 
 
 
SCHEDULE 1
[1]                    Clause 10.1, replace with the following:
“10.1                Enclosed LE vehicles must meet the following requirements:”
 
 [2]                   Insert a new clause
“14.5                Wheel Guards for MB, MC, MD1, MD2, MD3, NA and NB1 Category vehicles must comply with Clause 14.1 or Clause 14.2.”
 
[3]                    Replace Figures 1 and 2 with;