Telecommunications Labelling (Customer Equipment and Customer Cabling) Amendment Notice  2007 (No. 1)
Telecommunications Act 1997
The AUSTRALIAN COMMUNICATIONS AND MEDIA AUTHORITY makes this Notice under section 407 of the Telecommunications Act 1997.
Dated  24th August 2007
Chris Chapman
[signed]
Chairman
Lyn Maddock
[signed]
Deputy Chair
Australian Communications and Media Authority
  
  
1              Name of Notice
                This Notice is the Telecommunications Labelling (Customer Equipment and Customer Cabling) Amendment Notice  2007 (No. 1).
2              Commencement
                This Notice commences on the day after it is registered.
3              Amendment of Telecommunications Labelling (Customer Equipment and Customer Cabling) Notice 2001
                Schedule 1 amends the Telecommunications Labelling (Customer Equipment and Customer Cabling) Notice 2001.
 
Schedule 1        Amendments
(section 3)
  
[1]           Before section 1.1
insert in Part 1
Simplified outline of Part 1
·        Customer equipment is equipment that is used, or intended for use, on the customer side of the boundary of a telecommunications network.
·        Customer cabling is a line that is used, or intended for use, on the customer side of the boundary of a telecommunications network.
·        This Part defines general terms and acronyms used in this Notice, including the meaning and description of compliance records and items.
·        This Notice applies to manufacturers, importers and their authorised agents of telecommunications customer equipment and customer cabling.
·        If there is inconsistency between applicable standards, the supplier must choose which applicable standard to use and must prepare a statement including inconsistencies.
·        Suppliers may comply with replacement standards before the expiry of older standards.
[2]           Subsection 1.4 (1), definition of applicable standard
substitute
applicable standard, for an item that is mentioned in column 2 of the tables in Part 2 of Schedule 1, means:
                (a)    a standard that:
                          (i)    is mentioned in column 3 of the tables in that Part; and
                         (ii)    applies to the item; or
               (b)    if a part only of a standard that is mentioned in column 3 of the tables in Part 2 of Schedule 1 applies to the item, that part of the standard; or
                (c)    if a standard mentioned in column 3 of the tables in Part 2 has been amended, and subsection 6.1 (3) does not apply to the item, the standard as amended;
and includes a standard that has been revoked.
[3]           Subsection 1.4 (1), definition of Telecom Authorisation
substitute
Telecom Authorisation means an authorisation of the type described in section 126 of the Telecommunications Act 1989 immediately before the repeal of that Act.
[4]           After section 1.4
insert
1.4A        Acronyms
                In this Notice, a reference to an acronym mentioned in column 1 of the following table is a reference to the term mentioned in column 2 of the table.
Column 1
Acronym
Column 2
Term

AMPS
advanced mobile phone system

ASA
Air Services Australia

AS/ACIF
Australian Standard/Australian Communications Industry Forum

BRA
basic rate access

CAS
channel associated signalling

CC
customer cabling

CDMA
code division multiple access

CE
customer equipment

CT2
cordless telephone second generation

DECT
digital enhanced cordless telecommunications

ETSI
European Telecommunications Standards Institute

GSM
global system for mobile communications

HFC
hybrid fibre cable

ISDN
integrated services digital network

LIU
line isolating unit

LMB
large mega bit bearer

PHS
personal handyphone system

PMTS
public mobile telecommunications service

PRA
primary rate access

PSTN
public switched telephone network

STS
standard telephone service

[5]           Subsection 1.5 (1), at the foot
insert
Note   Section 25 of the Acts Interpretation Act 1901 defines document to include:
(a)   any paper or other material on which there is writing; and
(b)   any paper or other material on which there are marks, figures, symbols or perforations having a meaning for persons qualified to interpret them; and
(c)   any article or material from which sounds, images or writings are capable of being reproduced with or without the aid of any other article or device.
[6]           Subsection 1.5 (5), note
omit
[7]           Paragraph 1.8 (1) (a)
omit
in column 5;
insert
in column 3 of Table 1.1 in Schedule 1;
[8]           Subsection 1.8 (1), note 1
omit
subsection 1 (3)
insert
subclause 1 (3)
[9]           Before section 2.1
insert in Part 2
Simplified outline of Part 2
·        This Part specifies the kind of items to which this Notice applies (only those items listed in Schedule 1 are subject to the telecommunications regulatory arrangements).
[10]         Paragraph 2.1 (a)
substitute
                (a)    that is mentioned in column 2 of the tables in Part 2 of Schedule 1; and
[11]         Before section 2A.1
insert in Part 2A
Simplified outline of Part 2A
·        Some items are exempt items and may be exempt from compliance labeling but not from the requirement to meet applicable standards or, for the suppliers of those items, the requirement to maintain compliance records.
·        Suppliers must give ACMA notice of intention not to label certain exempt items.
·        A supplier must maintain a publicly available register of all exempt items on the internet. This Part specifies the form and information content of the register.
[12]         Paragraph 2A.1 (b)
omit
under section 420 of the Act,
[13]         Before section 3.1
insert in Part 3
Simplified outline of Part 3
·        Compliance labels must have certain characteristics (information required, durability, size and position on the item). The compliance mark is set out in Schedule 3.
·        A compliance label may, in certain circumstances, be placed on the packaging of an item. This Part specifies requirements for the characteristics of such a label.
·        Non‑compliant items are required to be labelled with a non‑compliance label, and statements about non‑compliance must be printed on the external surface of the packaging and incorporated into documentation supplied.
·        Customer cabling and associated cabling equipment must also be marked with particular information.
·        Equipment which may be installed or operated in a non‑compliant manner must be supplied with documentation to avoid such non‑compliance.
[14]         Subsection 3.1 (1)
omit
If:
insert
Subject to Part 2A, if:
[15]         Subsection 3.2 (1)
omit
If
insert
Subject to Part 2A, if
[16]         Before section 4.1
insert in Division 4.1
Simplified outline of Part 4
·        Before applying a compliance label to an item, a supplier must obtain permission from ACMA to use a regulatory mark and for the issue of a supplier code number.
·        Suppliers must meet the requirements (including keeping compliance records) of the compliance level for an applicable standard that is selected for an item.
·        There are additional requirements imposed on suppliers of modified items, disability customer equipment and customer equipment used in the supply of public mobile telecommunications service.
[17]         Subsection 4.3 (2)
omit
category,
insert
category in a table in Part 2 of Schedule 1,
[18]         Paragraph 4.6 (2) (a)
omit
a test report
insert
an endorsed test report
[19]         Subparagraph 4.6 (2) (d) (i)
omit
a test report
insert
an endorsed test report
[20]         Subparagraph 4.6 (2) (e) (i)
omit
a test report
insert
an endorsed test report
[21]         Subparagraph 4.6 (2) (f) (i)
omit
a test report
insert
an endorsed test report
[22]         Subparagraph 4.6 (2) (g) (i)
omit
a test report
insert
an endorsed test report
[23]         Before section 5.1
insert in Part 5
Simplified outline of Part 5
·        Suppliers must keep compliance records for certain items.
·        Suppliers must make compliance records available for inspection by ACMA or an authorised officer within prescribed timeframes.
·        Authorised officers may require a supplier to provide items to a recognised testing authority for testing.
·        An authorised officer may require a supplier to produce additional test reports or certification body statements for an item within the prescribed timeframe.
[24]         Paragraph 5.6 (1) (a)
omit
a test report
insert
an endorsed test report
[25]         Before section 6.1
insert in Part 6
Simplified outline of Part 6
·        Arrangements exist so that equipment may continue to be supplied following a change to an applicable standard, such as a new or amended standard or a change to a compliance level.
[26]         Before section 7.1
insert in Part 7
Simplified outline of Part 7
Transitional arrangements regarding labeling apply to:
·        items manufactured or imported before 1 July 1997 that meet the requirements of TS001‑1993; and
·        items manufactured or imported after 30 June 2001 to which sections 8 and 9 of ACA TS102‑1998 apply.
[27]         Schedule 1, Part 1, heading
substitute
Part 1          Applicable standards
[28]         Schedule 1, Part 1, subclause 1 (1)
omit
the table in this Part
insert
Table 1.1
[29]         Schedule 1, Part 1, subclause 1 (1A), including the note
omit
[30]         Schedule 1, Part 1, subclause 1 (2)
omit
the table in this Part
insert
Table 1.1
[31]         Schedule 1, Part 1, subclause 1 (2A), including the note
substitute
      (2A)   A reference to ‘Amdt #’ in the title of a technical standard indicates that the technical standard amends another technical standard.
Note   The reference to ‘Amdt’ is followed by the amendment number of the amendment. For example, ‘(Amdt 1)’.
      (2B)   A reference in Table 1.1 to a revoked standard is a reference to that standard as in force immediately before the standard was revoked.
[32]         Schedule 1, Part 1, subclauses 1 (3) and (4)
omit
column 5 of the table in Part 2
insert
column 3 of Table 1.1
[33]         Schedule 1, Part 1, clause 1, table
substitute
Table 1.1
Column 1
Citation of standard
Column 2
Title of standard
Column 3
Start/Amendment/Expiry date and Replacement standard (note 19)
Column 4
Notes

ACA TS001
ACA TS001‑1997
Telecommunications Technical Standard (Safety Requirements for Customer Equipment — ACA TS001–1997)
4/12/1997 – 1/7/2004
Replaced by AS/NZS 60950‑2000
5, 11, 17

ACA TS002
ACA TS002‑1997
Telecommunications Technical Standard (Analogue Interworking and Non‑interference Requirements — ACA TS002–1997)
4/12/1994 – 1/1/2003
Replaced by AS/ACIF S002‑2001
2, 10

ACA TS003
ACA TS003‑1997
Telecommunications Technical Standard (Customer Switching Systems Connected to the PSTN — ACA TS003–1997)
4/12/1997 – 1/9/2003
Replaced by AS/ACIF S003‑2001
2, 3

ACA TS004
ACA TS004‑1997
Telecommunications Technical Standard (Voice Frequency Performance Requirements for Customer Equipment — ACA TS004–1997)
10/12/1997 – 1/9/2003
Replaced by AS/ACIF S004‑2001
2

ACA TS005
ACA TS005‑1997
Telecommunications Technical Standard (Mobile Station for AMPS Analogue Cellular Mobile Telecommunications System —
ACA TS005–1997)
10/12/1997 ‑
14

ACA TS007
ACA TS007‑1997
Telecommunications Technical Standard (General Requirements for Customer Equipment Connected to the Telex Network — ACA TS007–1997)
10/12/1997 ‑
 

ACA TS008
ACA TS008‑1997
Telecommunications Technical Standard (Requirements for Authorised Cabling Products — ACA TS008–1997)
10/12/1997 – 1/1/2004
Replaced by AS/ACIF S008‑2001
13

ACA TS014
ACA TS014‑1997
Telecommunications Technical Standard (General Requirements for Customer Equipment Connected to an ISDN Primary Rate Interface — ACA TS014–1997)
10/12/1997 ‑
 

ACA TS015
ACA TS015‑1997
Telecommunications Technical Standard (General Requirements for Analogue Video Customer Equipment Connected to a Telecommunications Network — ACA TS015–1997)
10/12/1997 ‑
 

ACA TS016
ACA TS016‑1997
Telecommunications Technical Standard (General Requirements for Customer Equipment Connected to Hierarchical Digital Interfaces —
ACA TS016–1997)
10/12/1997 – 1/1/2004
Replaced by AS/ACIF S016‑2001
5

ACA TS018
ACA TS018‑1997
Telecommunications Technical Standard (GSM Customer Equipment — ACA TS018–1997)
4/12/1997 – 1/7/2008
Replaced by AS/ACIF S042.3‑2005
8, 15

ACA TS019
ACA TS019‑1997
Telecommunications Technical Standard (Customer Equipment for use with CT2 CA1 Cordless Telecommunications Systems — ACA TS019–1997)
10/12/1997 – 1/3/2008
 

ACA TS022
ACA TS022‑1997
Telecommunications Technical Standard (MobileSat Terminal Compatibility Requirements for System Access — ACA TS022–1997)
10/12/1997 ‑
16

ACA TS024
ACA TS024‑1997
Telecommunications Technical Standard (Broadcaster Interface Standard — ACA TS024–1997)
10/12/1997 ‑
 

ACA TS025
ACA TS025‑1997
Telecommunications Technical Standard (Line Isolation Devices — ACA TS025–1997)
4/12/1997 ‑
 

ACA TS028
ACA TS028‑1997
Telecommunications Technical Standard (Radio Equipment and Systems for DECT — ACA TS028–1997)
10/12/1997 – 1/3/2008
Replaced by standards under the radiocommunications arrangements
 

ACA TS031
ACA TS031‑1997
Telecommunications Technical Standard (Requirements for ISDN Basic Access Interface — ACA TS031–1997)
10/12/1997 – 1/9/2003
Replaced by AS/ACIF S031‑2001
4

ACA TS034
ACA TS034‑1997
Telecommunications Technical Standard (Personal Handy Phone System — ACA TS034–1997)
4/12/1997 – 1/3/2008
Replaced by standards under the radiocommunications arrangements
 

ACA TS034‑1997 (Amdt 1)
Telecommunications Technical Standard (Personal Handy Phone System — ACA TS034–1997) Amendment 2001 (No. 1)
5/9/2001 – 1/3/2008
Replaced by standards under the radiocommunications arrangements
 

ACA TS038
ACA TS038‑1997
Telecommunications Technical Standard (Requirements for ISDN Primary Rate Access Interface — ACA TS038–1997)
10/12/1997 – 1/9/2003
Replaced by AS/ACIF S038‑2001
4

ACA TS102
ACA TS102‑1998
Telecommunications Technical Standard (Customer Equipment and Customer Cabling —
ACA TS102–1998)
11/12/1998 ‑
 

ACA TS102 (Amdt 1)
Telecommunications Technical Standard (Customer Equipment and Customer Cabling) – ACA TS102‑1998 Amendment Standard 2001 (No. 1)
19/6/2001 ‑
 

AS/ACIF S002
AS/ACIF S002‑2001
Telecommunications Technical Standard (Analogue interworking and non‑interference requirements for Customer Equipment for connection to the Public Switched Telephone Network — AS/ACIF S002) 2001
18/4/2001 – 1/10/2006
Replaced by AS/ACIF S002‑2005
2

AS/ACIF S002‑2001 (Amdt 1)
Telecommunications Technical Standard (Analogue interworking and non‑interference requirements for Customer Equipment for connection to the Public Switched Telephone Network — AS/ACIF S002) Amendment 2004 (No. 1)
15/3/2002 – 1/10/2006
Replaced by AS/ACIF S002‑2005
2, 26

AS/ACIF S002‑2001 (Amdt 2)
Telecommunications Technical Standard (Analogue interworking and non‑interference requirements for Customer Equipment for connection to the Public Switched Telephone Network — AS/ACIF S002) Amendment 2004 (No. 2)
20/12/2004 – 1/10/2006
Replaced by AS/ACIF S002‑2005
2

AS/ACIF S002‑2005
Telecommunications Technical Standard (Analogue Interworking and non‑interference requirements for Customer Equipment for connection to the Public Switched Telephone Network — AS/ACIF S002:2005) 2005
5/4/2006 ‑
2

AS/ACIF S003
AS/ACIF S003‑2001
Telecommunications Technical Standard (Customer Switching, Multiplexing, and Ancillary Equipment for Connection to a Telecommunications Network — AS/ACIF S003) 2001
12/9/2001 – 30/6/2005
Replaced by AS/ACIF S003‑2005
2, 3

AS/ACIF S003‑2005
Telecommunications Technical Standard (Customer Access Equipment for Connection to a Telecommunications Network — AS/ACIF S003:2005) 2005
1/6/2005 – 1/11/2008
Replaced by AS/ACIF S003‑2006
2, 3

AS/ACIF S003‑2006
Telecommunications Technical Standard (Customer Access Equipment for connection to a Telecommunications Network — AS/ACIF S003:2006) 2006
23/11/2006 ‑
3

AS/ACIF S004
AS/ACIF S004‑2001
Telecommunications Technical Standard (Voice Frequency Performance Requirements for Customer Equipment — AS/ACIF S004) 2001
12/9/2001 – 1/10/2006
Replaced by AS/ACIF S004‑2004
2

AS/ACIF S004‑2004
Telecommunications Technical Standard (Voice Frequency Performance Requirements for Customer Equipment — AS/ACIF S004) 2004
20/12/2004 – 1/11/2008
Replaced by AS/ACIF S004‑2006
2

AS/ACIF S004‑2006
Telecommunications Technical Standard (Voice frequency performance requirements for Customer Equipment — AS/ACIF S004:2006) 2006
23/11/2006 ‑
 

AS/ACIF S006
AS/ACIF S006‑2001
Telecommunications Technical Standard (Requirements for Customer Equipment, operating in the voiceband, for connection to the non‑switched Telecommunications Network — AS/ACIF S006) 2001
18/4/2001 ‑
 

AS/ACIF S008
AS/ACIF S008‑2001
Telecommunications (Requirements for Authorised Cabling Products — AS/ACIF S008) Technical Standard 2001
24/12/2001 – 1/7/2008
Replaced by AS/ACIF S008‑2006
 

AS/ACIF S008‑2001 (Amdt 1)
Telecommunications (Requirements for Authorised Cabling Products — AS/ACIF S008:2001) Amendment Technical Standard (No. 1)
19/3/2002 – 1/7/2008
Replaced by AS/ACIF S008‑2006
 

AS/ACIF S008‑2006
Telecommunications Technical Standard (Requirements for customer cabling products — AS/ACIF S008:2006) 2006
28/6/2006 ‑
 

AS/ACIF S016
AS/ACIF S016‑2001
Telecommunications Technical Standard (Requirements for Customer Equipment with hierarchical digital interfaces — AS/ACIF S016) 2002
13/3/2002 ‑
5

AS/ACIF S031
AS/ACIF S031‑2001
Telecommunications Technical Standard (Requirements for ISDN Basic Access Interface — AS/ACIF S031) 2001
12/9/2001 ‑
4

AS/ACIF S038
AS/ACIF S038‑2001
Telecommunications Technical Standard (Requirements for ISDN Primary Rate Access Interface — AS/ACIF S038) 2001
12/9/2001 ‑
4

AS/ACIF S041
AS/ACIF S041‑2005
Telecommunications Technical Standard (Requirement for DSL Customer Equipment for connection to the Public Switched Telephone Network — AS/ACIF S041:2005) 2005
5/4/2006 ‑
 

AS/ACIF S042
AS/ACIF S042.1‑1999
Telecommunications Technical Standard (Requirements for connection to an air interface of a Telecommunications Network — Part 1: General — AS/ACIF S042.1:1999) 2006
28/6/2006 – 1/7/2008
Replaced by AS/ACIF S042.1‑2006
 

AS/ACIF S042.1‑2006
Telecommunications Technical Standard (Requirements for connection to an air interface of a Telecommunications Network‑Part 1: General — AS/ACIF S042.1:2006) 2006
28/6/2006 ‑
27

AS/ACIF S042.2‑1999
Telecommunications Technical Standard (Requirements for connection to an air interface of a Telecommunications Network — Part 2: CDMA (IS‑95) — AS/ACIF S042.2:1999) 2006
28/6/2006 ‑
 

AS/ACIF S042.3‑2005
Telecommunications Technical Standard (Requirements for connection to an air interface of a Telecommunications Network — Part 3: GSM Customer Equipment — AS/ACIF S042.3:2005) 2005
5/4/2006 ‑
8 (b)

AS/ACIF S043
AS/ACIF S043.1‑2003
Telecommunications Technical Standard (Requirements for Customer Equipment for connection to a metallic local loop interface of a Telecommunications Network — Part 1: General — AS/ACIF S043.1:2003) 2003
26/11/2003 ‑
 

AS/ACIF S043.2‑2003
Telecommunications Technical Standard (Requirements for Customer Equipment for connection to a metallic local loop interface of a Telecommunications Network — Part 2: Broadband — AS/ACIF S043.2:2003) 2003
26/11/2003 – 30/6/2005
Replaced by AS/ACIF S043.2‑2005
 

AS/ACIF S043.2‑2005
Telecommunications Technical Standard (Requirements for Customer Equipment for connection to a metallic local loop interface of a Telecommunications Network — Part 2: Broadband — AS/ACIF S043.2:2005) 2005
1/6/2005 – 1/11/2008
Replaced by AS/ACIF S043.2‑2006
 

AS/ACIF S043.2‑2006
Telecommunications Technical Standard (Requirements for Customer Equipment for connection to a metallic local loop interface of a Telecommunications Network — Part 2: Broadband AS/ACIF S043.2:2006) 2006
23/11/2006 ‑
 

AS/ACIF S043.3‑2001
Telecommunications Technical Standard (Requirements for Customer Equipment for connection to a metallic local loop interface of a Telecommunications Network — Part 3: DC, low frequency AC and voiceband — AS/ACIF S043.3:2001) 2003
26/11/2003 ‑
 

AS/NZS 4117
AS/NZS 4117‑1999
Telecommunications Technical Standard (Surge Protective Devices for Telecommunications Applications — AS/NZS 4117:1999) 2003
26/11/2003 ‑
 

AS/NZS 60950
AS/NZS 60950‑2000
Telecommunications Technical Standard (Safety of Information Technology Equipment — AS/NZS 60950:2000) 2003
26/11/2003 – 31/12/2006
Replaced by AS/NZS 60950‑2000 (Incorporating Amendment No. 1) and AS/NZS 60950.1‑2003
5

AS/NZS 60950‑2000 (Incorporating Amendment No. 1)
Telecommunications Technical Standard (Safety of Information Technology Equipment — AS/NZS 60950:2000 (Incorporating Amendment No. 1)) 2005
5/4/2006 – 31/12/2006
Replaced by AS/NZS 60950.1‑2003
5

AS/NZS 60950.1‑2003
Telecommunications Technical Standard (Information Technology Equipment — Safety, Part 1: General requirements — AS/NZS 60950.1:2003) 2005
5/4/2006 –
5

[34]         Schedule 1, Part 1, clause 2
omit
[35]         Schedule 1, Part 2, Category A, table
substitute
Table 1.2
Column 1
Category
(note 1)
Column 2
Item
Column 3
Technical standard
Column 4
Compliance
level
Column 5
Notes

A1
CE designed to connect to PSTN — analog for voice
AS/NZS 60950
3
 

AS/ACIF S002
3
2, 22, 26

AS/ACIF S004
3
2

A2
CE designed to connect to PSTN — analog for data
AS/NZS 60950
3
 

AS/ACIF S002
3
2, 22, 26

A3
CE designed to connect to PSTN — digital channel associated signalling (CAS) for voice operation
AS/NZS 60950
3
 

AS/ACIF S003
2
2, 3

AS/ACIF S004
3
2

AS/ACIF S016
3
 

A4
CE designed to connect to PSTN — digital CAS interface for data only
AS/NZS 60950
3
 

AS/ACIF S003
2
2, 3

AS/ACIF S016
3
 

A7
CE designed to connect to ISDN — TS014 PRA incorporating voice
AS/NZS 60950
3
 

AS/ACIF S004
3
2

ACA TS014
3
 

AS/ACIF S016
3
 

A8
CE designed to connect to ISDN — TS014 PRA for data
AS/NZS 60950
3
 

ACA TS014
3
 

AS/ACIF S016
3
 

A9
CE designed to connect to ISDN — BRA incorporating voice
AS/NZS 60950
3
 

AS/ACIF S004
3
2

AS/ACIF S031
3/2
4

A10
CE designed to connect to ISDN — BRA for data
AS/NZS 60950
3
 

AS/ACIF S031
3/2
4

A11
CE designed to connect to ISDN — ETSI PRA incorporating voice
AS/NZS 60950
3
 

AS/ACIF S004
3
2

AS/ACIF S038
3/2
4

A12
CE designed to connect to ISDN — ETSI PRA for data
AS/NZS 60950
3
 

AS/ACIF S038
3/2
4

A13
CE designed to connect to dedicated analog line (eg, copper pair, voice frequency or broad‑band line)
Category withdrawn
 
 

A14
CE designed to connect to dedicated digital — LMB
AS/NZS 60950
3/2
5

AS/ACIF S016
3/2
5

A16
Broadband HFC interface CE
Category withdrawn
 
 

A17
CE designed to connect to dedicated digital — SDH
Category withdrawn
 
 

A18
Dedicated video CE — without TS024 broadcaster LIU
AS/NZS 60950
2
 

ACA TS015
1
 

A19
Broadcaster LIU
AS/NZS 60950
3
 

ACA TS024
3
 

A20
ASA LIU
AS/NZS 60950
3
 

ACA TS025
3
 

A21
CE designed to connect to telex
AS/NZS 60950
3
 

ACA TS007
1
 

A22
CC and related CE
AS/ACIF S008
2
7

A23
Mobile equipment — AMPS
AS/NZS 60950
3
23

ACA TS005
3
 

A24
Mobile equipment — GSM
AS/NZS 60950
3
23

ACA TS018
3/2/1
8

AS/ACIF S042
3/2/1
8 (b), 27

A25
MobileSat terminal
AS/NZS 60950
3
 

ACA TS022
2
 

ACA TS028
2
 

A26
Cordless telecommunications — CT2
Category withdrawn
 
 

A27
Cordless telecommunications — PHS
Category withdrawn
 
29

A28
Cordless telecommunications — DECT
Category withdrawn
 
29

A39
Mobile equipment — CDMA
AS/NZS 60950
3
23

AS/ACIF S042
3/2/1
27

A49
CE designed for connection to a non‑switched voiceband only service
AS/NZS 60950
3
 

AS/ACIF S006
3
 

A50
CE designed for connection to a metallic local loop (including broadband, DC power feeding, DC signalling, low frequency AC, voiceband or signalling up to 20kHz)
AS/NZS 60950
3
 

AS/ACIF S041
3
 

AS/ACIF S043
3
 

A51
Disability customer equipment
AS/NZS 60950
3
22

AS/ACIF S002
2
 

AS/ACIF S004
2
28

A52
Surge protective devices
AS/NZS 60950
3
 

AS/ACIF S002
3
2, 26

AS/NZS 4117
3
 

A53
CE used in the supply of a PMTS
AS/NZS 60950
3
23, 24

AS/ACIF S042
2/1
27

[36]         Schedule 1, Part 2, Category B, table
substitute
Table 1.3
Column 1
Category
(note 1)
Column 2
Item
Column 3
Technical standard
Column 4
Compliance
level
Column 5
Notes

B29
System integral terminal that is part of a system
AS/NZS 60950
3
 

AS/ACIF S003
3
2

AS/ACIF S004
3
2

B30
Wireless equipment (CT2, PHS, DECT), including proprietary wireless, that is part of a system
AS/NZS 60950
3
 

AS/ACIF S004
2
2

ACA TS019
2
 

ACA TS028
2
 

ACA TS034
2
 

B31
Interface for connection of extensions
AS/NZS 60950
3
 

AS/ACIF S003
3
2, 25

[37]         Schedule 1, Part 2, Category C, table
substitute
Table 1.4
Column 1
Category
Column 2
Item
Column 3
Technical standard
Column 4
Compliance
level
Column 5
Notes

C33
System integral terminal supplied separately
AS/NZS 60950
3
 

AS/ACIF S004
3
2

C34
Wireless equipment (CT2, PHS, DECT), including proprietary wireless
AS/NZS 60950
3
 

AS/ACIF S004
2
2

ACA TS019
2
 

ACA TS028
2
 

ACA TS034
2
 

C35
Digital isolator
AS/NZS 60950
3
 

C36
Headset or amplifier
AS/NZS 60950
3
 

AS/ACIF S004
3
2

C37
Acoustically coupled CE
AS/ACIF S004
3
2

C38
Music‑on‑hold LIU
AS/NZS 60950
3
 

[38]         Schedule 1, Part 2, Category D, table
substitute
Table 1.5
Column 1
Category
Column 2
Item
Column 3
Technical standard
Column 4
Compliance level
Column 5
Notes

D40
Telephony equipment mentioned in paragraph 7 (c) of the Technical Standard
ACA TS102
1
10

D41
Modem with handset/headset port mentioned in paragraph 7 (d) of the Technical Standard
ACA TS102
1
11

D42
CE with mains power supply mentioned in subsection 8 (3) of the Technical Standard
ACA TS102
2
12

D43
Cord and cordage mentioned in subsection 11 (2) of the Technical Standard
ACA TS102
2
13

D44
Mobile equipment — AMPS mentioned in item 6 of Schedule 1 of the Technical Standard
ACA TS102
2
14

D45
Mobile equipment — GSM mentioned in item 7 of Schedule 1 of the Technical Standard
ACA TS102
2
15

D46
MobileSat terminal mentioned in item 8 of Schedule 1 of the Technical Standard
ACA TS102
2
16

D47
CE mentioned in paragraph 9 (6) (b) of the Technical Standard
ACA TS102
3
17

D48
CE mentioned in paragraph 9 (6) (c) of the Technical Standard
ACA TS102
 
18

D49
Any other item to which ACA TS102‑1998 applies
ACA TS102
 
 

[39]         Schedule 1, Part 2, note 1
substitute
Notes to Tables 1.1 to 1.5 
Note 1   Categories A5, A6, A13, A15, A16, A17, A26, A27, A28 and B32 have been withdrawn. Other missing sequentially numbered categories do not exist.
[40]         Schedule 1, Part 2, notes 4 to 7
substitute
Note 4   Compliance level 2 applies only for testing the requirements in this standard that are different from the requirements in the ETSI standards.
Note 5   Compliance level 2 applies for testing items with less than 2048 kbit per second interfaces or more than 2048 kbit per second interfaces. For items with 2048 kbit per second interfaces, compliance level 3 applies.
Note 6   This note is reserved.
Note 7   Category A22 applies to customer cables and related customer equipment that are designed or intended to be installed on customer’s premises and connected to a telecommunications network or facility, including all cable types, plugs, sockets and connectors, but not including surge protective devices (SPDs) supplied for installation by registered cabling providers. Such SPDs are required to comply with Category A52.
[41]         Schedule 1, Part 2, note 19
omit
in column 5.
insert
in column 3 of Table 1.1 in Schedule 1.
[42]         Schedule 1, Part 2, note 20
substitute
Note 20   This note is reserved.
[43]         Schedule 1, Part 2, after note 27
insert
Note 28   The applicable clauses are AS/ACIF S004–2001 5.4.3.5 and 5.4.3.6, AS/ACIF S004–2004 5.4.3.5 and 5.4.3.7, AS/ACIF S004–2006 5.4.3.6 and 5.4.3.8.
Note 29   The radiocommunications performance aspects of equipment in this category must comply with radiocommunications regulatory arrangements.
[44]         Schedule 4
omit all the words after ‘Return Your Completed Form To:’
insert
New South Wales Region
(including Sydney, Newcastle, Canberra and Coffs Harbour)
PO Box Q500, Queen Victoria Building NSW 1230
Tel: 1300 850 115
Fax: 02 9245 4099
Email: nswro@acma.gov.au
Southern Australia Region
(including Melbourne, Adelaide, Hobart and Wodonga)
PO Box 13120, Law Courts, Melbourne Vic 8010
Tel: 1300 850 115
Fax: 03 9963 6989
Email: saro@acma.gov.au
Northern Australia Region
(including Cairns, Darwin, Townsville, Brisbane and Rockhampton)
PO Box 288, Red Hill Qld 4059
Tel: 1300 850 115
Fax: 07 3247 7100
Email: naro@acma.gov.au
Western Australia Region
PO Box 3061, Perth Adelaide Terrace WA 6832
Tel: 1300 850 115
Fax: 08 9461 2100
Email: waro@acma.gov.au
[45]         Schedule 4A
omit
http://www.aca.gov.au/standards/cabling/registration_licensing.htm
insert
http://www.acma.gov.au/WEB/STANDARD//pc=IND_TECH_TEL_CABLE
[46]         Schedule 4A
omit all the words after ‘Return Your Completed Form To:’
insert
New South Wales Region
(including Sydney, Newcastle, Canberra and Coffs Harbour)
PO Box Q500, Queen Victoria Building NSW 1230
Tel: 1300 850 115
Fax: 02 9245 4099
Email: nswro@acma.gov.au
Southern Australia Region
(including Melbourne, Adelaide, Hobart and Wodonga)
PO Box 13120, Law Courts, Melbourne Vic 8010
Tel: 1300 850 115
Fax: 03 9963 6989
Email: saro@acma.gov.au
Northern Australia Region
(including Cairns, Darwin, Townsville, Brisbane and Rockhampton)
PO Box 288, Red Hill Qld 4059
Tel: 1300 850 115
Fax: 07 3247 7100
Email: naro@acma.gov.au
Western Australia Region
PO Box 3061, Perth Adelaide Terrace WA 6832
Tel: 1300 850 115
Fax: 08 9461 2100
Email: waro@acma.gov.au
[47]         Schedule 5
omit everything after ‘DECLARATION’
insert
I declare that the product mentioned above complies with the above mentioned standards and all products supplied under this Declaration have not been modified from the sample identified above.
 
Signature of Authorised Person
 
Date

 
 
 
 
 
 
 

 
 
 

 
Print Name

 
 
 

 
Position in Organisation

 
 
 

[48]         Schedule 5A
omit everything after ‘SUPPLIER’S DECLARATION’
insert
I declare that the disability customer equipment mentioned above complies with the standards mentioned above and that all disability customer equipment supplied under this Declaration have not been modified from the sample identified above.
I declare that I will supply not more than 50 items of the disability customer equipment mentioned above in a calendar year.

Name
Position in Organisation

Signature
Date

[49]         Schedule 7, heading
substitute
Schedule 7        Supplementary compliance documentation
(paragraphs 4.5 (2) (d) and 4.6 (2) (d))
[50]         Schedule 7, Part 1, heading
substitute
Part 1                 Approvals and Test Reports
[51]         Schedule 7, clause 103
omit
Reports:
insert
Test Reports: