Vehicle Standard (Australian Design Rule 11/00 – Internal Sun Visors) 2006 Amendment 1
I, ANTHONY NORMAN ALBANESE, Minister for Infrastructure, Transport, Regional Development and Local Government, determine this vehicle standard under subsection 7 (1) of the Motor Vehicle Standards Act 1989.
 
 
 
 
Dated               26th JUNE        2008
 
 
 
 
 
 
 
 
 
 
 
 
 
 
 
[Signed]
 
Anthony Norman Albanese
 
Minister for Infrastructure, Transport, Regional Development and Local Government
 
CONTENTS
 
1.           legislative provisions............................................................................ 3
2.           amendment of vehicle standard...................................................... 3
Schedule 1.................................................................................................................... 4
 
1.                                          legislative provisions
1.1.                                    Name of Legislative Instrument
1.1.1.                              This instrument is the Vehicle Standard (Australian Design Rule 11/00 – Internal Sun Visors) 2006 Amendment 1.
1.2.                                    Commencement
1.2.1.                              This instrument commences on the day after it is registered.
2.                                          amendment of vehicle standard
2.1.                                    The changes specified in Schedule 1 amend Vehicle Standard (Australian Design Rule 11/00 –Internal Sun Visors) 2006.
 
 
Schedule 1
[1]               Clause 11.0 renumber as 1.
[2]               Clause 11.0.1 renumber as 1.1
[3]               Clause 11.0.1.1 renumber as 1.1.1
[4]               Clause 11.0.1.2 renumber as 1.1.2
[5]               Clause 11.0.2 renumber as 1.2
[6]               Clause 11.0.2.1 renumber as 1.2.1
[7]               Clause 11.0.3 renumber as 1.3
[8]               Clause 11.0.3.1 renumber as 1.3.1
[9]               Clause 11.0.3.2 renumber as 1.3.2
[10]           Remove unnumbered title Purpose and Scope and insert clause number 2.  FUCTION AND SCOPE.
[11]           Remove unnumbered text under Purpose and Scope insert clause number 2.1 “This Australian Design Rule (ADR) is part of the Australian motor vehicle standards system and is a national standard for the purposes of the Motor Vehicle Standards Act 1989.”
[12]           Insert clause number 2.2 “The function of this Australian Design Rule is to specify requirements for internal ‘Sun Visors’ to reduce the injury potential of internal ‘Sun Visors’ and the adjacent vehicle structure.”
[13]           Remove unnumbered title APPLICABILITY and insert clause number 3.  APPLICABILITY.
[14]           Remove unnumbered text under APPLICABILITY and insert clause number 3.1 “This ADR applies to the design and construction of vehicles as set out in 3.2.”
[15]           Insert clause number 3.2 Applicability Table to existing table.
[16]           Replace all instances of “ ‘Sun Visor’ ” with “ ‘Sun Visor’ ”.  These appear in clauses 11.2.1, 11.2.2, 11.3.1, 11.3.2, 11.3.4.1 and 11.3.4.2,
[17]           Replace all instances of “ ‘Contactable’ ” with “ ‘Contactable’ ”.  These appear in clauses 11.2.1,11.2.2 and 11.3.2.
[18]           Clause 11.3.3, replace “ ‘Approved’ ” with “ ‘Approved’ ”.
[19]           Clause 11.3.4.1, replace “+ 5” with “± 5”.
[20]           Clause 11.3.4.2, replace “+ 0.1” with “± 0.1”.
[21]           Clause 11.3.4.4, replace “+ 5” with “± 5”.
[22]           Clause 11.4, replace text with the following:
“The energy absorption requirements of this vehicle standard shall be deemed to be satisfied if the ‘Sun Visor’ has satisfied the requirements of Annex 4 "Procedures for Testing Energy-Dissipating Materials" of  United Nations Economic Commission for Europe Regulation 21/01 Uniform Provisions Concerning the Approval of Vehicles with Regard to Their Interior Fittings. ”