Instrument number CASA EX05/08
I, SHANE PATRICK CARMODY, Deputy Chief Executive Officer, Strategy and Support, a delegate of CASA, make this instrument under regulation 11.160 of the Civil Aviation Safety Regulations 1998 (CASR 1998).
[Signed S. Carmody]
Shane Carmody
Deputy Chief Executive
Strategy and Support
31 January 2008
Exemption — display of markings and carriage of identification plates
1          Duration
            This instrument:
(a)   commences on the day after it is registered; and
(b)   stops having effect at the end of January 2010.
2          Application
            This instrument applies to Australian fixed wing aircraft and rotorcraft with maximum take-off weight of less than 5 700 kg operating wholly within Australian territory (the aircraft).
3          Exemption
             The aircraft is exempt from compliance with the following requirements:
(a)   subregulation 45.045 (1) of CASR 1998 to the extent mentioned in Schedule 1;
(b)   subregulation 45.145 (1) of CASR 1998 subject to the condition mentioned in Schedule 2;
(c)   subparagraph 45.065 (3) (b) (ii) and item 1 of paragraph 45.065 (3) (c) of CASR 1998 subject to the condition mentioned in Schedule 3.
Schedule 1          Extent of exemption
            The exemption extends only to display markings on the under surface of the port wing or across the under surface of both wings.
Schedule 2          Condition
              The aircraft must carry a manufacturer’s data plate as required by regulation 21.820 of CASR 1998.
Schedule 3          Condition
            The minimum height must be 150 millimetres.