Vehicle Standard (Australian Design Rule 4/04 – Seatbelts) 2006 Amendment 2
I, ANTHONY NORMAN ALBANESE, Minister for Infrastructure, Transport, Regional Development and Local Government, determine this vehicle standard under subsection 7 (1) of the Motor Vehicle Standards Act 1989.
Dated 20 February 2009
[Signed]
ANTHONY NORMAN ALBANESE
Minister for Infrastructure, Transport, Regional Development and Local Government
CONTENTS
1. legislative provisions. 3
2. amendment of vehicle standard.. 3
Schedule 1. 4
1. legislative provisions
1.1. Name of Legislative Instrument
1.1.1. This instrument is the Vehicle Standard (Australian Design Rule 4/04 – Seatbelts) 2006 Amendment 2.
1.2. Commencement
1.2.1. This instrument commences on the day after it is registered.
2. amendment of vehicle standard
2.1. The changes specified in Schedule 1 amend Vehicle Standard (Australian Design Rule 4/04 – Seatbelts) 2006.
Schedule 1
[1] Insert a new clause 5.3. to read
“Side-facing seats must comply with the requirements for forwards-facing seats, except that upper torso restraints must not be provided.”
[2] Clause 7.1 Amend “The technical requirements adopted ….” to read “……Provided clause 5.3 is met, the technical requirements adopted.....”.
[3] Clause 7.2 Amend “....technical requirements of this standard provided Appendix A ….” to read “……technical requirements of this standard provided clause 5.3 and Appendix A .....”.
[4] Clause 7.3 Amend “....technical requirements of this standard provided Appendix A ….” to read “……technical requirements of this standard provided clause 5.3 and Appendix A .....”.