Advanced Search

Radiocommunications (Digital Radio Channels — Western Australia) Plan Variation 2008 (No. 1)

Subscribe to a Global-Regulation Premium Membership Today!

Key Benefits:

Subscribe Now for only USD$40 per month.
Radiocommunications (Digital Radio Channels — Western Australia) Plan Variation 2008 (No. 1)1
Radiocommunications Act 1992
The AUSTRALIAN COMMUNICATIONS AND MEDIA AUTHORITY makes this Plan Variation under subsection 44A (6) of the Radiocommunications Act 1992.
Dated 18th December 2008
Chris Chapman
[signed]
Member
Chris Chea
[signed]
Member
Australian Communications and Media Authority
  
  
1              Name of Plan Variation
                This Plan Variation is the Radiocommunications (Digital Radio Channels — Western Australia) Plan Variation 2008 (No. 1).
2              Commencement
                This Plan Variation commences on the day after it is registered.
3              Amendment of Radiocommunications (Digital Radio Channels — Western Australia) Plan 2007
                Schedule 1 amends the Radiocommunications (Digital Radio Channels — Western Australia) Plan 2007.
Schedule 1        Amendments
(section 3)
  
[1]           Section 3, after definition of designated BSA radio area
insert
ERP means effective radiated power.
[2]           After section 4
insert
5              Maximum ERP limits
         (1)   For each digital radio multiplex transmitter, the ERP of that transmitter in any part of a sector or bearing must not exceed the maximum ERP specified in the output radiation pattern table for that sector or bearing.
         (2)   The licensee of a digital radio multiplex transmitter must, if requested by ACMA to do so, demonstrate, to the satisfaction of ACMA, that the ERP of a transmitter in any part of a sector or bearing specified by ACMA complies with this section.
[3]           Schedule 1, table 1, column 6
substitute
TS1132978

TS1132979

[4]           Schedule 1, attachment 1.1
omit
Specification Number
TS1132474
insert
Specification number
TS1132978
[5]           Schedule 1, attachment 1.1
omit
Output Radiation Pattern
 

Bearing or Sector
(Clockwise direction)
Maximum ERP

0°T – 70°T
12.5 kW

70°T – 85°T
4.0 kW

85°T – 338°T
12.5 kW

338°T – 360°T
4.0 kW

insert
Output Radiation Pattern

Bearing or sector
(clockwise direction)
Maximum ERP

      0°T –   40°T
50 kW

    40°T –   60°T
25 kW

    60°T –  120°T
12.5 kW

  120°T –  145°T
25 kW

  145°T –  360°T
50 kW

[6]           Schedule 1, attachment 1.2
omit
Specification Number
TS1132473
insert
Specification number
TS1132979
[7]           Schedule 1, attachment 1.2
omit
Output Radiation Pattern
 

Bearing or Sector
(Clockwise direction)
Maximum ERP

0°T – 70°T
12.5 kW

70°T – 85°T
4.0 kW

85°T – 338°T
12.5 kW

338°T – 360°T
4.0 kW

insert
Output Radiation Pattern

Bearing or sector
(clockwise direction)
Maximum ERP

      0°T –   40°T
50 kW

    40°T –   60°T
25 kW

    60°T –  120°T
12.5 kW

  120°T –  145°T
25 kW

  145°T –  360°T
50 kW

Note
1.       All legislative instruments and compilations are registered on the Federal Register of Legislative Instruments kept under the Legislative Instruments Act 2003. See http://www.frli.gov.au.