Vehicle Standard (Australian Design Rule 10/02 – Steering Column) 2008 Amendment 1

Link to law: https://www.comlaw.gov.au/Details/F2010L01470

 
 
 
 
Vehicle Standard (Australian Design Rule 10/02 – Steering Column) 2008 Amendment 1
I, ANTHONY NORMAN ALBANESE, Minister for Infrastructure, Transport, Regional Development and Local Government, determine this vehicle standard under subsection 7 of the Motor Vehicle Standards Act 1989.
 
 
 
 
Dated               21   MAY                                2010
 
 
 
 
 
 
 
 
 
 
 
 
 
 
[Signed]
 
 
Anthony Norman Albanese
 
Minister for Infrastructure, Transport, Regional Development and Local Government
 
CONTENTS
 
1.           legislative provisions............................................................................ 3
2.           amendment of vehicle standard...................................................... 3
Schedule 1.................................................................................................................... 4
 
1.                                          legislative provisions
1.1.                                    Name of Legislative Instrument
1.1.1.                              This instrument is the Vehicle Standard (Australian Design Rule 10/02 – Steering Column) 2008 Amendment 1.
1.2.                                    Commencement
1.2.1.                              This instrument commences on the day after it is registered.
2.                                          amendment of vehicle standard
2.1.                                    The changes specified in Schedule 1 amend Vehicle Standard (Australian Design Rule 10/02 – Steering Column) 2008.
 
 
Schedule 1
[1]               Clause 3.1.2 amend to read “There is no mandatory application date for all other model vehicles. They may comply with this vehicle standard or continue to comply with earlier versions of this vehicle standard as applicable for particular vehicle categories.”
Read Entire Law on www.comlaw.gov.au