Vehicle Standard (Australian Design Rule 31/01 - Brake Systems for Passenger Cars) 2005 Amendment 1

Subscribe to a Global-Regulation Premium Membership Today!

Key Benefits:

Subscribe Now for only USD$20 per month, or Get a Day Pass for only USD$4.99.
 
 
 
 
Vehicle Standard (Australian Design Rule 31/01 – Brake Systems for Passenger Cars) 2005 Amendment 1
I, ANTHONY NORMAN ALBANESE, Minister for Infrastructure, Transport, Regional Development and Local Government, determine this vehicle standard under section 7 of the Motor Vehicle Standards Act 1989.
 
 
 
 
Dated               1     February    2010
 
 
 
 
 
 
 
 
 
 
 
 
 
 
[Signed]
 
 
Anthony Norman Albanese
 
Minister for Infrastructure, Transport, Regional Development and Local Government
 
CONTENTS
 
1.           legislative provisions............................................................................ 3
2.           amendment of vehicle standard...................................................... 3
Schedule 1.................................................................................................................... 4
 
1.                                          legislative provisions
1.1.                                    Name of Legislative Instrument
1.1.1.                              This instrument is the Vehicle Standard (Australian Design Rule 31/01 – Brake Systems for Passenger Cars) 2005 Amendment 1.
1.2.                                    Commencement
1.2.1.                              This instrument commences on the day after it is registered.
2.                                          amendment of vehicle standard
2.1.                                    The changes specified in Schedule 1 amend Vehicle Standard (Australian Design Rule 31/01 – Brake Systems for Passenger Cars) 2005.
 
 
Schedule 1
[1]               Clause 2 amend  “...IMPLIMENTATION” to “...IMPLEMENTATION”.
[2]               Clause 2.5 renumber as 2.6.
[3]               Insert a new clause 2.5 to read
“Vehicles certified to ADR 31/02 or a later version need not comply with this rule.”
[4]               Clause 6.1 amend “....Approval of Passenger Cars with Regard Braking...” to “....Approval of Passenger Cars with Regard to Braking...”
[5]               Insert a new clause 6.1.1 to read “In respect of Annex 8 of any of  the editions, vehicles will be deemed to meet the requirements of this annex if compliance can be demonstrated during a Conformity of Production assessment.”
[6]               Clause 6.2 amend “...Approval of Vehicles of Categories M, N and O with Regard Braking, incorporating the 09 series of Amendments...” to “...Approval of Vehicles of Categories M, N and O with Regard to Braking, incorporating the 09 to the 10 series of Amendments...”
[7]               Insert a new clause 6.2.1 to read “In respect of Annex 18 of any of the editions, vehicles will be deemed to meet the requirements of this annex if compliance can be demonstrated during a Conformity of Production assessment.”
[8]               Appendix A, Annex 3, Clause 1.5.1.5  replace symbol  “

Related Laws