Advanced Search

CASA 386/11 – Instructions – for approved use of P-RNAV procedures

Subscribe to a Global-Regulation Premium Membership Today!

Key Benefits:

Subscribe Now for only USD$40 per month.
Instrument number CASA 386/11
I, PETER REGINALD FEREDAY, Executive Manager, Industry Permissions Division, a delegate of CASA, make this instrument under subregulation 179A (1) of the Civil Aviation Regulations 1988.
[Signed P. Fereday]
Peter R. Fereday
Executive Manager
Industry Permissions Division
1 September 2011
Instructions — for approved use of P-RNAV procedures
1          Duration
                 This instrument:
(a)   commences on the day after registration; and
(b)   stops having effect at the end of July 2014.
2          Application
                 This instrument applies to the use of precision area navigation (P-RNAV) by Pratt Aviation Pty Ltd, Aviation Reference Number 753582 (the operator):
(a)   in any place where P-RNAV procedures are authorised by the air safety authority or navigation services provider for the place; and
(b)   in the aircraft mentioned in Schedule 1 (the aircraft) equipped with navigation equipment that is:
             (i)  mentioned in Schedule 2; and
            (ii)  installed in accordance with clause 3 of Schedule 3.
4          Instructions
                 The operator must c omply with the standards and procedures mentioned in Schedule 3.
Schedule 1         Aircraft
Manufacturer
Model
Serial no.
Nationality and registration marks

Bombardier Inc
BD-700-1A10
9101
VH-VDX

Schedule 2         Aircraft operation
           An operation using any of the following navigation and communication equipment:
Manufacturer/type
Model

Honeywell/GPS
GNSSU

Honeywell/NAV Unit
RNZ-851

Rockwell-Collins/Radio Altimeter
ALT-4000

Honeywell/FMS
CD-820

Honeywell/IRS
Laser Ref IV

Honeywell/VHF COMM
RCZ-833K
RCZ-833

Rockwell Collins/HF COMM
HF-9031A

Honeywell/Autopilot
IC-800

Honeywell/Altitude Alerter
IC-800

Honeywell/Guidance Control Panel
GP-400

Honeywell/Radio Management Unit
RM-855B

ACSS/TCAS
TCAS 2000 (RT-950)

Honeywell/Air Data Computer
AZ-840

Honeywell/Transponder
RCZ-833K (module XS-825F)

Schedule 3          Standards and procedures
        1     The operator must comply with the requirements for P-RNAV procedures mentioned in its operations manual and flight manual.
        2     The operator’s operations manual and flight manual must comply with the standards and procedures mentioned in sections 9 and 10 of Temporary Guidance Leaflet No. 10 (Airworthiness and Operational Approval for Precision RNAV Operations in Designated European Airspace) issued by the Joint Aviation Authorities (the temporary guidance leaflet).
        3     Airborne systems installed in the aircraft:
(a)   must meet the performance certification criteria and functional criteria mentioned in sections 6 and 7 of the temporary guidance leaflet; and
(b)   must have been approved by CASA for use with P-RNAV procedures.
        4     The training program for the flight crew using P-RNAV procedures must comply with the standards for training programs mentioned in paragraph 10.5 of the temporary guidance leaflet.
        5     Flight crew members must receive appropriate briefings and guidance material as set out in section 10 of the temporary guidance leaflet.
        6     The operator must tell CASA, in writing, not later than 14 days after ceasing to be the operator of the aircraft mentioned in Schedule 1.