Vehicle Standard (Australian Design Rule 42/04 – General Safety Requirements) 2005 Amendment 2
I, CATHERINE KING, Parliamentary Secretary for Infrastructure and Transport, determine this vehicle standard under subsection 7 of the Motor Vehicle Standards Act 1989.
Dated 23 / 12 / 2010
Catherine King
Parliamentary Secretary for Infrastructure and Transport
CONTENTS
1. legislative provisions............................................................................ 3
2. amendment of vehicle standard...................................................... 3
Schedule 1.................................................................................................................... 4
1. legislative provisions
1.1. Name of Legislative Instrument
1.1.1. This instrument is the Vehicle Standard (Australian Design Rule 42/04 – General Safety Requirements) 2005 Amendment 2.
1.2. Commencement
1.2.1. This instrument commences on the day after it is registered.
2. amendment of vehicle standard
2.1. The changes specified in Schedule 1 amend Vehicle Standard (Australian Design Rule 42/04 – General Safety Requirements) 2005.
Schedule 1
[1] Clause 7.2.1 amend to read “Actuation of the 'Engine start control' shall not cause the vehicle to move”
[2] Clause 15 amend to read
“.....conform to SAA, SAE, BS, JIS, DIN, ISO or ECE Standards, or FMVSS 106 Brake Hoses, specified for ......”
[3] Clause 19.3.2.1.1.5 amend to read “Remote opening/closing is allowable through continuous operation of a remote actuation device provided that the remote actuation device must be incapable of opening/closing the power window from a distance of more than 11 m from the vehicle”
[4] Clause 19.3.2.6.4 amend to read “…..equivalent to the technical requirements of clause 19.3…..”