Telecommunications Technical Standard (Requirements for Customer Access Equipment for connection to Telecommunications Network — Part 1: General — AS/CA S003.1:2010) Amendment 2012 (No.1)
Telecommunications Act 1997
The AUSTRALIAN COMMUNICATIONS AND MEDIA AUTHORITY makes this Amendment under subsection 376 (1) of the Telecommunications Act 1997.
Dated 21st September 2012
Chris Chapman
[signed]
Member
Richard Bean
[signed]
Member/General Manager
Australian Communications and Media Authority
1 Name of Amendment
This Amendment is the Telecommunications Technical Standard (Requirements for Customer Access Equipment for connection to Telecommunications Network – Part 1: General - AS/CA S003.1:2010) Amendment 2012 (No.1).
2 Commencement
This Amendment commences on the day after it is registered.
Note: All legislative instruments and compilations are registered on the Federal Register of Legislative Instruments kept under the Legislative Instruments Act 2003. See http://www.frli.gov.au.
3 Amendment of Telecommunications Technical Standard (Requirements for Customer Access Equipment for connection to Telecommunications Network – Part 1: General - AS/CA S003.1:2010) 2010
The Telecommunications Technical Standard (Requirements for Customer Access Equipment for connection to Telecommunications Network – Part 1: General - AS/CA S003.1:2010) 2010 is amended as set out in Schedule 1.
Schedule 1 Amendment
(section 3)
[1] Section 5
substitute
5 Requirement
Customer access equipment must comply with the mandatory requirements set out in the Australian Standard — Requirements for Customer Access Equipment for connection to a Telecommunications Network – Part 1: General (AS/CA S003.1:2010), published by Communications Alliance Ltd in September 2010, and incorporating the amendment made to the standard of that name published on 15 June 2012.
Note: On 15 June 2012, Communications Alliance Ltd published Amendment No. 1/2012 to AS/CA S003.1:2010. That amendment updated the reference to Australian Standard AS/NZS 60950.1:2003, in section 3 of AS/CA S003.1:2010, to the 2011 edition of that standard.
.