Telecommunications Technical Standard (Analogue Interworking and Non-interference Requirements for Customer Equipment for Connection to the Public Switched Telephone Network – AS/CA S002:2010) Amendment 2012 (No. 1)

Link to law: https://www.comlaw.gov.au/Details/F2012L01900

Subscribe to a Global-Regulation Premium Membership Today!

Key Benefits:

Subscribe Now
Telecommunications Technical Standard (Analogue Interworking and Non-interference Requirements for Customer Equipment for Connection to the Public Switched Telephone Network — AS/CA S002:2010) Amendment 2012 (No.1)
Telecommunications Act 1997
The AUSTRALIAN COMMUNICATIONS AND MEDIA AUTHORITY makes this Technical Standard under subsection 376 (1) of the Telecommunications Act 1997.
Dated 14th September 2012
Chris Chapman
[signed]
Member
Richard Bean
[signed]
Member/General Manager
Australian Communications and Media Authority
1              Name of Technical Standard
                This Technical Standard is the Telecommunications Technical Standard (Analogue Interworking and Non-interference Requirements for Customer Equipment for Connection to the Public Switched Telephone Network – AS/CA S002:2010) Amendment 2012 (No.1).  
2              Commencement
                This Technical Standard commences on the day after it is registered.
Note All legislative instruments and compilations are registered on the Federal Register of Legislative Instruments kept under the Legislative Instruments Act 2003. See http://www.frli.gov.au.
3              Amendment of Telecommunications Technical Standard (Analogue Interworking and Non-interference Requirements for Customer Equipment for Connection to the Public Switched Telephone Network – AS/CA S002:2010) 2011 
                Schedule 1 amends the Telecommunications Technical Standard (Analogue Interworking and Non-interference Requirements for Customer Equipment for Connection to the Public Switched Telephone Network – AS/CA S002:2010) 2011.         
 
Schedule 1   Amendment
                        (section 3)
 
[1]            Section 6
                substitute
                6      Requirement
Customer equipment must comply with the mandatory requirements set out in the Australian Standard — Analogue interworking and non-interference requirements for Customer Equipment for connection to the Public Switched Telephone Network (AS/CA S002:2010), published by Communications Alliance Ltd in October 2010, and incorporating the amendment made to the standard of that name published on 23 April 2012.
            Note       Amendment No.1/2012 to AS/CA S002:2010 was published by Communications Alliance Ltd on 23 April 2012. The amendment corrects an error in ‘Figure 8’ of the standard.
.