Autonomous Sanctions (Export Sanctioned Goods – Syria) Designation 2012
Autonomous Sanctions Regulations 2011
I, BOB CARR, Minister for Foreign Affairs, make this Designation under regulation 4 of the Autonomous Sanctions Regulations 2011.
Dated 21 August 2012
BOB CARR
Minister for Foreign Affairs
Contents
1 Name of Designation 2
2 Commencement 2
3 Definitions 2
4 Designation of export sanctioned goods 2
Schedule 1 List of goods 3
Part 1 Items of particular concern if destined for end users in Syria 3
Division 1 Materials, chemicals, micro‑organisms and toxins 3
Division 2 Materials Processing 3
1 Name of Designation
This Designation is the Autonomous Sanctions (Export Sanctioned Goods – Syria) Designation 2012.
2 Commencement
This Designation commences on the day after it is registered.
3 Definitions
In this Designation:
CAS means a Chemical Abstract Number.
4 Designation of export sanctioned goods
For regulation 4 of the Autonomous Sanctions Regulations 2011, Schedule 1 lists goods designated to be export sanctioned goods for Syria.
Schedule 1 List of goods
(section 4)
Part 1 Items of particular concern if destined for end users in Syria
Division 1 Materials, chemicals, micro‑organisms and toxins
Item
Description
CAS No.
1.
Aluminum chloride
7446-70-0
2.
Dichloromethane
75-09-2
3.
N,N-Dimethylaniline
121-69-7
4.
Isopropyl bromide
75-26-3
5.
Isopropyl ether
108-20-3
6.
Monoisopropylamine
75-31-0
7.
Potassium Bromide
7758-02-3
8.
Pyridine
110-86-1
9.
Sodium bromide
7647-15-6
10.
Sodium metal
7440-23-5
11.
Tributylamine
102-82-9
12.
Triethylamine
121-44-8
13.
Trimethylamine
75-50-3
14.
Diethylenetriamine
111-40-0
15.
Butyrylcholinesterase (BCHE)
16.
Pyridostigmine bromide
101-26-8
17.
Obidoxime chloride
114-90-9
Division 2 Materials Processing
Item
Description
1.
Floor-mounted fume hoods (walk-in style) with a minimum nominal width of 2.5 meters.
2.
Full face-mask air-purifying and air-supplying respirators.
3.
Class II biosafety cabinets and glove boxes.
4.
Batch centrifuges with a rotor capacity of 4 L or greater, usable with biological materials.
5.
Fermenters with an internal volume of 10 L – 20 L, usable with biological materials.
6.
Conventional or turbulent air-flow clean-air rooms and self-contained fan-HEPA filter units that may be used for P3 or P4 (BSL 3, BSL 4, L3, L4) containment facilities.
7.
Reaction vessels or reactors, with or without agitators, with total internal (geometric) volume greater than 0.1 m³ (100 l) and less than 20 m³ (20000 l).
8.
Agitators for use in reaction vessels or reactors specified in item 7.
9.
Impellers, blades or shafts designed for agitators specified in item 8.
10.
Heat exchangers or condensers with a heat transfer surface area of greater than 0.15 m², and less than 20 m².
11.
Tubes, plates, coils or blocks (cores) designed for heat exchangers or condensers specified in item 10.
12.
Multiple-seal, single seal and seal-less pumps with manufacturer's specified maximum flow-rate greater than 0.6 m3/h.
13.
Valves with nominal sizes greater than 1.0 cm
14.
Casings (valve bodies) or preformed casing liners designed for valves specified in item 13.
Technical note: The 'nominal size' is defined as the smaller of the inlet and outlet port diameters.
15.
Storage tanks, containers or receivers with a total internal (geometric) volume greater than 0.1 m³ (100 l).
16.
Distillation or absorption columns of internal diameter greater than 0.1 m.
17.
Liquid distributors, vapour distributors or liquid collectors designed for distillation or absorption columns specified in item 16.
18.
Vacuum pumps with manufacturer's specified maximum flow-rate greater than 5 m³/h (under standard temperature (273 K (0o C)) and pressure (101.3 kPa) conditions), in which all surfaces that come into direct contact with the chemical(s) being processed are made from any of the following materials:
(a) nickel or alloys with more than 40% nickel by weight;
(b) alloys with more than 25% nickel and 20% chromium by weight;
(c) fluoropolymers (polymeric or elastomeric materials with more than 35% fluorine by weight);
(d) glass or glass-lined (including vitrified or enamelled coating);
(e) graphite or carbon-graphite;
(f) tantalum or tantalum alloys;
(g) titanium or titanium alloys;
(h) zirconium or zirconium alloys;
(i) ceramics;
(j) ferrosilicon (high silicon iron alloys); or
(k) niobium (columbium) or niobium alloys.
Technical note: carbon-graphite is a composition consisting of amorphous carbon and graphite, in which the graphite content is eight percent or more by weight.
19.
Casings (pump bodies), preformed casing liners, impellers, rotors or jet pump nozzles designed for vacuum pumps specified in item 18.
