Vehicle Standard (Australian Design Rule – Harmonisation) 2012 Amendment 1
I, CATHERINE KING, Parliamentary Secretary for Infrastructure and Transport, determine this vehicle standard under subsection 7 of the Motor Vehicle Standards Act 1989.
Dated 20 / 5 /2012
[Signed]
Catherine King
Parliamentary Secretary for Infrastructure and Transport
CONTENTS
1. legislative provisions. 3
2. amendment of vehicle standard.. 3
Schedule 1. 4
1. legislative provisions
1.1. Name of Legislative Instrument
1.1.1. This instrument is the Vehicle Standard (Australian Design Rule – Harmonisation) 2012 Amendment 1.
1.2. Commencement
1.2.1. This instrument commences on the day after it is registered.
2. amendment of vehicle standard
2.1. The changes specified in Schedule 1 amend Vehicle Standard (Australian Design Rule – Harmonisation) 2012.
Schedule 1
[1] Clause 5.1 (c) amend to read:
“the approval corresponds to:
(i) where Australia applies the UNECE Regulation, the same version of the UNECE Regulation as specified in the alternative standard or the UNECE Regulation in force from time to time; or
(ii) where Australia does not apply the UNECE Regulation, the same version of the UNECE Regulation as specified in the alternative standard.”