Advanced Search

Vehicle Standard (Australian Design Rule 35/03 - Commercial Vehicle Brake Systems) 2009 Amendment 1

Subscribe to a Global-Regulation Premium Membership Today!

Key Benefits:

Subscribe Now for only USD$40 per month.
 
 
 
 
Vehicle Standard (Australian Design Rule 35/03 – Commercial Vehicle Brake Systems) 2009 Amendment 1
I, JAMIE EDWARD BRIGGS, Assistant Minister for Infrastructure and Regional Development, determine this vehicle standard under subsection 7 of the Motor Vehicle Standards Act 1989.
 
 
 
 
Dated              25/08 /2014                            
 
 
 
 
 
 
 
 
 
 
 
 
 
 
 
 
SIGNED
 
Jamie Edward Briggs
 
Assistant Minister for Infrastructure and Regional Development
 
CONTENTS
 
1.               legislative provisions. 3
2.               amendment of vehicle standard.. 3
Schedule 1. 4
 
1.                                          legislative provisions
1.1.                                    Name of Legislative Instrument
1.1.1.                              This instrument is the Vehicle Standard (Australian Design Rule 35/03 – Commercial Vehicle Brake Systems) 2009 Amendment 1.
1.2.                                    Commencement
1.2.1.                              This instrument commences on the day after it is registered.
2.                                          amendment of vehicle standard
2.1.                                    The changes specified in Schedule 1 amend Vehicle Standard (Australian Design Rule 35/03 – Commercial Vehicle Brake Systems) 2009.
Schedule 1
[1]               Insert a new clause 2.8 to read
“Vehicles certified to ADR 35/04 or a later version need not comply with this rule.”