Instrument number CASA EX16/15
I, PETER REGINALD FEREDAY, Executive Manager, Industry Permissions Division, a delegate of CASA, make this instrument under regulation 11.160 of the Civil Aviation Safety Regulations 1998 (CASR 1998).
[Signed P. Fereday]
Peter Reginald Fereday
Industry Permissions Division
27 January 2015
Exemption — display of markings and carriage of identification plates
(a) commences on 1 February 2015; and
(b) expires, as if it had been repealed by another instrument, at the earlier of:
(i) the end of December 2015; or
(ii) the date when the Civil Aviation Legislation Amendment (Part 45) Regulation 2015 commences.
This instrument applies to Australian fixed-wing aircraft and rotorcraft with maximum take-off weight of less than 5 700 kg operating wholly within Australian territory (the aircraft).
The aircraft is exempt from compliance with the following requirements:
(a) subregulation 45.045 (1) of CASR 1998 to the extent mentioned in Schedule 1;
(b) subregulation 45.145 (1) of CASR 1998 subject to the condition mentioned in Schedule 2;
(c) subparagraph 45.065 (3) (b) (ii) and item 1 of paragraph 45.065 (3) (c) of CASR 1998 subject to the condition mentioned in Schedule 3.
Schedule 1 Extent of exemption
The exemption extends only to display markings on the under surface of the port wing or across the under surface of both wings.
Schedule 2 Condition
The aircraft must carry a manufacturer’s data plate as required by regulation 21.820 of CASR 1998.
Schedule 3 Condition
The minimum height must be 150 millimetres.